Advanced Technocracy Inc.

Ambala Cantt, Ambala, Haryana

We offer hydraulic ramfeatures:easy to operatehigh performancelonger service liferobust constructionprinciple of work:it works on a principle of water hammer stating that when flowing water is suddenly stopped in a long pipe a pressure wave travels along the pipe creating an effect of water hammer 12. Set up consists of a pipe section fitted with a pulse valve and non-return valve, a supply reservoir on a stand which is connected to an overhead tank, an air vessel above the valve chamber smoothes cyclic fluctuations from the ram delivery. Different pressure may be applied to the pulse valve to change the closing pressure and hence the operating characteristic.The flow rate of useful and waste water is measured using measuring tank and stop watch provided. Pressure gauge is connected for the purpose of measurement. Experiments :to find out discharge of useful water and waste water.To find out the efficiency of the hydraulic ram.Utilities required:electric supply provide 230 +- 10 vac, 50 hz, single phase electric supply with proper earthing. (neutral earth voltage less than 5 vac.) 5a, three pin socket with switch for pump.Water supply tap water connection, distilled water @ 250 liters (optional)technical details:product hydraulic ramproduct code hml-03ram size 50 x 15mm, supply head 2.5m approx, delivery head 1.0m (max.)air vessel suitable capacity moc ssdelivery line for ram, dia 50 mm length 1 m.Pump capacity 1hp, crompton sharp hero make supply tank capacity 140 ltrs.Overhead tank capacity 80 ltrs.Measuring tank for useful water 1000ml (measuring cylinder), for waste water 20ltr ss tank fitted with piezometertube & scale

Advanced Technocracy Inc. is Manufacturer, Exporter & Supplier of Closed Circuit Apparatus for Determination of Flow Through Venture Meter and Orifice MeterPiping System:Consisting of Two G.I. Pipe lines, each line fitted with a venture meter & orifice meter of size 25 mm with a gate valve & provided with a set of distribution chamber having isolating cocks to facilitate experiment on individual venture meter or orifice meter. Differential Head Measurement:Differential mercury manometer with mercury. Measuring Tank:M.S. Powder CoatingM.S.FRP LiningS.S. Unit of suitable size with an overflow arrangement & Provided with a PVC control valve & an elbow. Sump Tank:M.S. Powder Coating MS.FRP LiningSS. Unit of suitable size for storage of water to circulate through experimental unit. Supply Pump Set:0.5 HP single phase [ISI marked] to pump water from the sump from the sump fitted with a control valve (Gun Metal gate Valve) Main switch:Single phase main switch Frame Work Mounting:Mounted on frame work & completely fitted with all the above items as self contained unit suitable for operation without and foundation. Services Required:Single phase power supply 200220V & water to fill up sump tank.

We are a popularSpectrum Analyzer Manufacturer, Spectrum Analyzer Suppliers and Spectrum Analyzer Exporters and offer the good service for the clientele condition.

This device is shaped like the Oscilloscope which is best suited for time domain.

Technical Specifications:

• Frequency range : 150KHz 3GHz
• Frequency resolution : 0.1MHz
• Accuracy : 50KHz
• Frequency span setting range : 1MHz 3GHz
• Accuracy : 3%
• Auto set function
• Noise floor : 100dBm
• RBW range : 30KHz, 100KHz, 300KHz, 1MHz
• ACPR / CHPW / OCBW measurement
• 3 traces in different colors
• Split window and limit line function
• Support interface : USB device / Host, RS-232C
• 5.6 LCD with VGA output
• Power source : 220230V AC, 50Hz, 1 Phase

We are offering parallel and counter flow heat.System featurecompact, comprehensive, sturdy designfully instrumentation for experimentation of heat transfer process studydirect reading of temperature, voltmeter and ammeter measurement.Demonstrations of heat transfer through concentric tube heat exchanger.Fault trainer as optional attachments.System descriptionthe apparatus consist of a heat exchanger mounted on a rigid ms structure frame with a control panel. A centrifugal pump and a sump tank made up of non-corrosive pvc are placed at bottom. A separate hot water boiler is supplied with the equipment. It is fitted with a level switch, relief valve. Hot water from the boiler is fed into one end of the inner tube, which gets cools after passing through the length of the tube. Cold water is circulated through the boiler tubes with the help of centrifugal pump. Cold water will be circulated from tap water of lab will drained to lab drainage line. Outer tube gi 1 dia. This is tube in tube system having inner tube of copper and outer of gi. The heat will be transfer effectively counter flow of both the water.Operation & maintenance manualself-explanatory operating & maintenance manual will be provided. This will include theory, operating procedure, standard results, and maintenance procedures. System components inner tube 15 mm (d) x 0.7mm wall thickness, (copper)digital temperature indicator range 0-150c. With selector switch.Temperature sensor: rtd (pt100) thermocouple. 5 nos.Sump tank. 40 liter (approx.)centrifugal pumpdigital watt meterstandpiping & wiring.Small boiler with 3kw heaterheater regulatorflow meter-rotameter 0.2-3.0 litmin and 0.5-5.0litminservice required at site electric supply 230v 50hz. With proper earthing.Tap water supply & drainage

We are offering gsm mobile phone trainer kitdeveloped exactly as per the teaching syllabus and experiment contents, the gsm mobile phone trainer kit fully meets the teaching requirements of courses such as mobile communication or communications major in colleges and universities. Manufactured as per the set standards, the gsm mobile phone trainer kit and is designed to save time and expenses in research and experimentation.

• the experiment kit combines theoretical teaching of mobile communication course, reference gsm standard, according to the protocol, it vividly recreates the basic process of mobile station and base station interaction through simulating a base station, among which it has three-layer protocol of gsm communication. It is used to analyze such processes as mobile phone network access, pick up, dial, ringing, hang up through logic analyzer during the interaction process of experiment kit (base station) and mobile phone in experiment kit.
• the experiment kit has key technology demonstration and experiment of mobile communication, as well as mobile station access, mobile station call, base station call, power control, double computer network full duplex speech communication system experiment, and etc. In addition, it can observe other working state on access computer interface screen of experiment kit.
• the experiment kit could realize three kinds of wireless standards, such as gsm900, e-gsm and dcs1800. The three wireless standards could automatically switch and network switch. The experiment kit has its own operation number; therefore there is no problem of charging after mobile phone network access. In addition, users would not be restricted by time and expenses in processing experiments and scientific research.
• it adopts eight-channel time division multiple access (tdma) communication technology of frequency division duplex (fdd), 270.833kbit/s gaussian minimum shift keying (gmsk) modulation mode and balanced demodulation technology. It could observe experiment waveform and communication data with oscilloscope and logic analyzer.
• it adopts dsp, fpga and many kinds of advanced information treatment method to design and realize gsm air interface three-layer protocol, which we process independent intellectual property rights. The product filled the blank of gsm testing aspects for the domestic in 2002, and state information department has given operational number of the system: 00101(00101 has the same meaning with china mobile and china unicom)
• it realizes the control of emission power that could reach better transmission quality under the condition of unnecessary for the maximum emission power, which can reduce emission power and thus reduce interference to other communications and harm to people from radio frequency to the minimum. Therefore it is suitable for users to make experiments and study on the structure of gsm communication system for a long time.
• it adopts plexiglass buffle for protection.

performance parameters

• ac, dc power supply
  • input : ac 220v10%
  • output : dc 12v10%, +5v5%
• clock output
  • frequency output : 13mhz frequency output accuracy: 2hz output stability: 0.1ppm (070)
• radio frequency output
  • power output range : -110dbm-50dbm spectrum: in accordance with gsm protocol
• radio frequency input
• power input range : power level 519 (+33dbm+5dbm)
• spectrum : in accordance with gsm protocol

experiment kit host specification :

• 53cm37cm13cm

experiment contents

• experiment kit structure and man-machine interface experiment
• orthogonal modulation and demodulation experiment
• gmsk modulation and demodulation experiment
• spectrum analysis principle and experiment
• basic coding and decoding method experiment
• channel coding method experiment in gsm system
• interleave and deinterleave experiment
• fdd, tdma principle and experiment
• mobile station network access experiment
• mobile station call experiment
• mobile station called experiment
• mobile station technology index and test experiment

we are offering losses due to pipe fittings sudden enlargement. study of pipe fittingsthe set up consists of a 12 bend and elbow, a sudden expansion & sudden contraction fitting from 15mm to 25mm, ball valve and gate valve. pressure tapings are provided at inlet and outlet of these fittings under test. a differential manometer fitted in the line gives pressure loss of individual fittings. present set-up is self-contained water re-circulating unit, provided with a sump tank and a centrifugal pump etc. flow control valve and by-pass valve are fitted in water line to conduct the experiment on different flow rates. flow rate of water is measured with the help of measuring tank and stop watch. utilities required:- electric supply 0.5 kw, 220v ac, single phase- water supply tap water connection, distilled water @ 60 liters (optional)- floor area with drain facility technical details:- product study of pipe fittings- sudden enlargement from 15mm to 25mm- sudden contraction from 25mm to 15mm- bend- elbow- ball valve- gate valve- water circulation fhp pump, cromptonsharp make- flow measurement using measuring tank with piezometer, capacity 40 ltrs- sump tank capacity 85 ltrs- stop watch electronic- control panel onoff switch, mains indicator etc.

We manufacture am fm radio receiver using cutting-edge technologies. The am/fm radio trainer kit has components placed over their corresponding symbols in the schematic drawing on the surface of the printed circuit board thereby maximizing the learning process and explain theory of operation of the radios. The radios are constructed in sections with each section being completely tested before moving on to the next, reducing difficult troubleshooting associated with some other kits. Trainer includes a high quality printed circuit board with schematic printed on the surface. The manual is easy to understand and assumes no previous electronics knowledge. The trainer kit of am fm radio receivers form a superheterodyne receiver of standard am (amplitude modulation) and fm (frequency modulated) broadcast frequencies. objective

• to study am radio receiver
• to study fm radio receiver

nine sections

• audio amplifier circuit
• am detector circuit
• am if circuit
• am amplifier circuit
• am mixer and oscillator circuit
• fm detector circuit
• first fm if amplifier circuit
• second fm if amplifier circuit
• fm radio frequency stages.

am radio sectiontuning range520 khz - 1620 khzif frequency455 khztracking 3 db from 700 khz to 1400 khz10 db signal to noise at 200 microvolt typical fm radio sectiontuning range588 mhz - 108 mhzif frequency10.7 mhztracking 5 db from 90 mhz to 106 mhzdetectoruses ratio detector and full time auto frequency control10 db signal to noise at 200 microvolt typical

We are a prime manufacturer, supplier and exporter of Biology Labware . Our products are highly demanded in market in commercial, government as well as private sector. The biology labware we offer are famous for their striking features such as optimum quality, durability, long working life, accuracy and high performance. Below mentioned are the name of our biology labware that we offer : range

bp handle

clinostat

clinostat electric

dissecting scissors blunt type

dissecting scissors

dissecting scissors straight

dissecting trays

dissection box or dissecting set

film slide projector

forceps blunt ends

forceps pointed ends

ganong's potometer

glass manometer tube mounted

hand microtome

insect collecting net with aluminium handle

j tube screw fitting

leaf area cutter

micro cover glass

microscope cavity slides

microscope slides

overhead projector

photosynthometer

plankton net

potometer 'h' type

potometer farmer's

potometer simple

precision rotary microtome

respirometer

root pressure manometer

rotary microtome

scalpel handle

simple auxanometer

simple respirometer

slide box wooden

slide cabinet

slide tray aluminium

thoday's potometr

We are offering biological safety cabinet. re-circulation of air arrangement is provided for re-circulation of air thus creating highest level of clean air. Sliding sash renders unit convertible for use a conventional vertical laminar flow bench by lifting sliding door upwards. Filtered exhaust protects work space and avoids build up of air borne particles. Supplementary air barrier make up air is sucked through to prevent contamination. Glove parts and gauntlets permits working with medium to low risk organisms. Unidentified stains of pathogenic cultures.virus burn out ensures destruction of pathogens present in outletexhausted air, thus a step towards environment protection. Supplied complete with satin finish perforated s.s. Table top, sliding front door, static pressure manometer, built in u.v. Germicidal light, glove port and gauntlets, hepa filter, pre filter, pre filter at exhaust, fluorescent illumination and cock for gas, air or vaccum line. To work on 220230 volts ac supply. Available in following size 2x2x2 ft.3x2x2 ft.4x2x2 ft.6x2x2 ft.

We are offering microprocessor training kitworking in tune with the fast growth of embedded technology and its influence in our daily lives, we have developed advanced 8085 microprocessor training kit for training the engineers of tomorrow. We provide development tools for most popular and useful micro controllers. The micro controller trainer kits contain all necessary hardware and software to learn programming and interfacing of 8/16 bit micro controllers. With 8085 microprocessor training kits, we also provide a set of standard and optional accessories for better training. available with

• lcd display
• 101 ascii keyboard
• in-built power supply

optional interface & study card modules

• adc/dac
• stepper motor
• dc motor etc.

Designed using latest technologies, the apparatus for heat transfer from a pin fin determines the effectiveness of the heat transfer. The setup consists of pin type fin fitted in duct. A fan is provided on one side of duct to conduct experiments under forced draft conditions. Airflow rates can be varied with the help of damper provided in the duct. A heater heats one end of fin and heat flows to another end. Heat input to the heater is given through variac. Digital temperature indicator measures temperature distribution along the fin. objectives

• to study temperature distribution along the length of fin in both free & forced convection.
• comparison of theoretical temperature distribution with experimentally obtained distribution.

utilities required

• electricity supply : 1 phase, 220 v ac, 5 amp.
• table for set-up support

• fin material : brass
• size : 12.5 mm (approx.) 15 cm long (approx.)
• duct : made of ms
• fan: standard make
• heater:band type, nichrome wire
• temperature sensors : rtd pt-100 type (6 nos.), 5 for pin and 1for duct temperature.
• control panel:
  • dimmerstat : 0-230 v, 2 a
  • digital temperature indicator :
    • 0-300c
    • with multi-channel switch
    • on/off switch
    • mains indicator etc
    • the whole setup is mounted on a powder coated base plate

Features :

• LSI-circuit provides high reliability & durability
• Measurement : Watt, ACV, ACA and Power factor
• 8 x 8.5mm large LCD and Max. reading 9999
• Fully Auto range and zero adjustment facility
• Memory record, recall and data hold function
• Built in low battery indicator