• Size (mm)6.30 x 3.10,5.00 x 2.60

SMD resistors are rectangular in shape. They have metallised areas at either end of the body of the SMD resistor and this enables them to make contact with the printed circuit board through the solder. The resistor itself consists of a ceramic substrate and onto this is deposited a metal oxide film. The thickness, and the length of the actual film determines the resistance. In view of the fact that the SMD resistors are manufactured using metal oxide, means that they are quite stable and usually have a good tolerance.

Axial-lead tubular hermetically sealed solid tantalum capacitors have proven reliability and performance, combined with low leakage current, high capacitance and low dissipation factor with very high stability over time. They can withstand high frequency vibrations from 55 to 2000 Hz at 20g with no internal damage. Plastic film insulating sleeve hermetically sealed withstand life test of 2000 hours at 85 degrees C at rated WDCV. These capacitors have been proven in commercial, harsh environments of industrial and military applications. Solid tantalum capacitors are suitable for decoupling, blocking, by-passing, filtering and r-c timing circuits.

Dealers and stockiest of electronic component distribution, specialising in Mil Spec multi pin circular connectors and related accessories. We import and distribute components . We stock Mil. C 5015, 26482, 38999 connectors and also backshells and other accessories. We supply componentry to military specification for the aerospace, airline, defence, transport, medical, mining, navigational, telecommunication, lighting and electronic industries.and RF Connectors Connector World’s extensive stock range of products allows us to fill your order requirements immediately. The range of brands we stock and supply include: Amphenol, Burndy, ITT Cannon, FKI, Souriau, FCI Molex , AMP, ETC

• Temperature coefficient± 50ppm/°C
• Output max. with heat sink10W
• Temperature range-55...+125°C
• Test voltage500VAC
• Thermal resistance to baseplate4K/W
• Resistance0.01Ω
• Rated output3W
• Tolerance± 1%
• Construction formTO-247

• Forward Voltage Drop1.8 V
• Maximum Reverse Leakage Current200 uA
• Maximum Power Dissipation312 W
• Operating Temperature Range- 55 C to + 175 C
• Mounting StyleThrough Hole
• Package / CaseTO-220-2
• Maximum Diode Capacitance1000 pF
• Peak Reverse Voltage1.2 kV
• Factory Pack Quantity50
• Forward Continuous Current10 A
• Max Surge Current250 A
• ConfigurationSingle

• Coil Current70 mA
• Coil Resistance400 Ohm
• Maximum AC Voltage Rating115/200 V
• Maximum DC Voltage Rating28 V
• Operating Temperature-65 to 125 °C
• TypePolarized and Non Latching Hermetically Sealed Relay
• Contact Arrangement4PDT
• Maximum Current Rating5 A
• MountingSocket

• Size (mm)6.30 x 3.10,5.00 x 2.60

SMD resistors are rectangular in shape. They have metallised areas at either end of the body of the SMD resistor and this enables them to make contact with the printed circuit board through the solder. The resistor itself consists of a ceramic substrate and onto this is deposited a metal oxide film. The thickness, and the length of the actual film determines the resistance. In view of the fact that the SMD resistors are manufactured using metal oxide, means that they are quite stable and usually have a good tolerance.

Axial-lead tubular hermetically sealed solid tantalum capacitors have proven reliability and performance, combined with low leakage current, high capacitance and low dissipation factor with very high stability over time. They can withstand high frequency vibrations from 55 to 2000 Hz at 20g with no internal damage. Plastic film insulating sleeve hermetically sealed withstand life test of 2000 hours at 85 degrees C at rated WDCV. These capacitors have been proven in commercial, harsh environments of industrial and military applications. Solid tantalum capacitors are suitable for decoupling, blocking, by-passing, filtering and r-c timing circuits.

Dealers and stockiest of electronic component distribution, specialising in Mil Spec multi pin circular connectors and related accessories. We import and distribute components . We stock Mil. C 5015, 26482, 38999 connectors and also backshells and other accessories. We supply componentry to military specification for the aerospace, airline, defence, transport, medical, mining, navigational, telecommunication, lighting and electronic industries.and RF Connectors Connector World’s extensive stock range of products allows us to fill your order requirements immediately. The range of brands we stock and supply include: Amphenol, Burndy, ITT Cannon, FKI, Souriau, FCI Molex , AMP, ETC

• Rated output3W
• Tolerance± 1%
• Construction formTO-247
• Temperature coefficient± 50ppm/°C
• Output max. with heat sink10W
• Temperature range-55...+125°C
• Test voltage500VAC
• Thermal resistance to baseplate4K/W
• Resistance0.01Ω

• Forward Continuous Current10 A
• Max Surge Current250 A
• ConfigurationSingle
• Forward Voltage Drop1.8 V
• Maximum Reverse Leakage Current200 uA
• Maximum Power Dissipation312 W
• Operating Temperature Range- 55 C to + 175 C
• Mounting StyleThrough Hole
• Package / CaseTO-220-2
• Maximum Diode Capacitance1000 pF
• Peak Reverse Voltage1.2 kV
• Factory Pack Quantity50

• Contact Arrangement4PDT
• Maximum Current Rating5 A
• MountingSocket
• Coil Current70 mA
• Coil Resistance400 Ohm
• Maximum AC Voltage Rating115/200 V
• Maximum DC Voltage Rating28 V
• Operating Temperature-65 to 125 °C
• TypePolarized and Non Latching Hermetically Sealed Relay