These are Self Adhesive Labels used for the Decoration and Markings of Vehicles of various types & for other Equipments exposed to weathering or requiring a long life. These labels are mostly offered with a removable Application Tape.

The newly developed conduit pressure sensor SPT-Si is specially designed for measuring small pipepressures from 0.10 mBar = 0.100 mmWk. Both air and fluid pressure are measured, relative to absolutepressure. The sensor is supplied with M12 or (Hirschmann) connector or wired cable.The silicon measuring brace is very accurate in the conversion of pressure to Volt or mA output, standard accuracy 0.5% of the measuring range.

Flow measurement is the quantification of bulk fluid movement. Flow can be Measured in a variety of ways.positive-displacement flow meters accumulate a fixed volume of fluid and then count the number of thimes the volume is filled ot measure flow.other flow measurement mothods rely on forces produced by the flowing stream as it overcomes a known constriction to indirectly calculate flow. flow may be measured by measureing the velocity of fluid over a known area.

We offer a broad portfolio of flow measurement instruments.

Add-on System for Conventional Safety Valve Test Benches

• Automated
• Set Pressure measurement
• Condition Rating measurement
• Electronic bubble count leak rate test
• Detailed analysis of valve operation
• Computerized test records
• Test results printout for certificate
• Patented worldwide

Seetru Quicktester

BSP & NPT Connections From 1/4 to 2Standard Maximum Operating Pressure Up to 55 bar/797.71 psi

Features & Benefits

• Simplifi ed valve testing, for compliance with pressure systems safety & equipment regulations
• Enables rapid valve testing in complete safety
• Highly portable, compact design (subject to suitable compressed air supply)
• Suitable for use on wide range of valves
• Accurate, unambiguous pressure readout
• Very low consumption of supply medium
• Bench top or carry case version available
• Easy to use and maintain
• Manufactured to quality system compliant with ISO9001
• Supplied with comprehensive instructions
• Pressure gauges supplied as optional extras
• Supplied with a range of thread size adaptors

We manufacture special duty compensators for high pressure applications with specialized end fittings of materials like Aluminum Bronze etcThis product is being used for marine applications and defense establishments in India

Digital programmable pressure transmitter with fluh diaphragm, for measuring relative and absolute pressures. A special weld-infitting helps to create ahygienic process connection. Adjustable with an optional programming tool for turn-down 1:4, zero-point, damping and diverse unit of measure. Pressure:-1/0 bar 0/50 mbar up to 0/100 bar Output:4.20 mA0.5 V0.10 V0, 5.4, 5 V rat

The Seetru Seeflex gauge is designed for use within the marine and offshore industries for tanks containing fl ammable liquids.The Seefl ex gauge meets the requirements of SOLAS (Safety Of Lives At Sea), and is also type approved by many worldwideshipping authorities including; Det Norske Veritas (DNV), RINA, Lloyds Register of Shipping, Nippon Kaiji Kyokai and Bureau Veritas.

This gauge is commonly used for fuel oil, hydraulic oil and lubrication oil tanks of cargo shops and work boats.

The Seetru Marine gauge is designed for use within the marine and offshore industries. Due to it's tubular design this gauge is suitable only for use with non-fl ammable liquids. For flammable liquid applications please see either Seeflex (G31) or Seemag gauges (G35).

This gauge is commonly used for the water storage and coolant tanks on board cargo ships, tugs and military vessels.

Digital programmable pressure transmitter with fluh diaphragm an multi-adjustable process connections e.g. Clamp, DIN &ANSI flanges, for measuring relative and absolute pressures. Adjustable with an optional programming tool for turn-down 1:4, zero-point, damping and diverse unit of measure.

The Seetru Seemag tank content indicator or gauge is a high quality yet economical magnetic level indicator. Its unique design offers considerable advantages over conventional magnetic gauges including accurate step-less reading with all round visibility and the option of high/low level alarms with remote digital reading.

The Seemag gauge meets the requirements of SOLAS (Safety Of Lives At Sea), and is also type approved by many worldwide shipping authorities including; Det Norske Veritas (DNV), RINA, Lloyds Register of Shipping, American Bureau of Shipping (ABS) and Germanischer Lloyds.

The Seetru Admiralty liquid level gauge has been specifi cally designed to meet the stringent standards required by the Ministry of Defence for design, material selection and certifi cation, including shock testing. With a tubular glass indicator the G20 utilises an ingenious fl exible fi xing system which enables multi-angle and directional mounting capabilities.

For flammable liquid applications please see either Seeflex (G31) or Seemag gauges (G35).

An Air Compressor is a device that converts power (usually from an electric motor, a diesel engine or a gasoline engine) into kinetic energy by compressing and pressurizing air, which, on command, can be released in quick bursts. There are numerous methods of air compression, divided into either positive-displacement or negative-displacement types

We offer various types of air compressors and spares based on their design and operating principles.

These are large sized Four Colour Printed Posters.Base material can be PET , POLYCARBONATE , PVC , MIRROR SILVER PET .These can be embossed / thermoformed , selectively Domed. for Applying one can use Removable adhesive , Magnets etc.

Wellan 2000 :Wellan 2000 technology for improving the quality of water and its effects are just starting to become more and more popular, itsprinciples are already being applied in many other areas. You only need to look at computer technologies, magnetic stripes on credit cards, photography, CDs, etc. In fact, there are respected physicists working on creating a quantum computer as we speak.

A number of renowned physicist work on the development of a quantum computer. The aim is to utilise the storage capacity of a liquidmolecules (e.g., water), which is infinite on a certain level. Thus the function and the efficiency of Wellan 2000 is not a matter of credencebut it is simply a forward looking technology from the sector of quantum physcis which opens up numerous interesting possibilities.

WELLAN 2000 has has proved its worth in many sectors, both in private household andin industries for the last 15 years. We are able to look back upon ten thousand very content customers.

• NO CHEMICAL
• NO ELECTRICITY
• NO FILTERS
• NO MAGNETS
• NO MAINTENANCE

These can be provided in various finishes (viz. GlossPolished, Matt, Velvet, Suede etc.) in different standard available thickness. With a wide range of colours to select from -- metallic or non-metallic --- different densities of glitter sparkle can be provided in metallic shades. Can provide selective chrome (i.e. mirror finish ) gold silver or holographic effect. With or without embossing of the desired shape & of desired height within the tolerance range. To suit the substrate on which the panel is applied, the adhesive will be accordingly provided.

The Seetru range of safety valves for liquid applications has been designed to be compact and highly effi cient. The bubble-tightsealing performance makes these valves suitable for many liquid applications including; hydraulic systems, pumping systems, thermal relief, chemical storage, waste water management, oil transfer, petrochemical industry, fi re fi ghting equipment and watercooling systems. Suitable for temperatures up to 250 C.

The valves are GOST/RTN approved and comply with the requirements of Pressure Equipment Directive 97/2/EC (CE Marked).This range of valves has the option of either elastomer sealing or metal-to-metal sealing.

The Seetru range of safety valves for refrigeration applications are designed to meet the needs of the refrigeration industry, offering safety valve technology for compressor manufacturers, industrial refrigeration, commercial refrigeration, ice makingsystems and air conditioning. The valves are compact and designed with bonded sealing technology and the highest possible sealing performance to comply with most stringent environmental standards. Each valve is leak tested to better than 10-5 mbar litres/sec on Helium. This is equivalent to a leakage rate of less than 1oz in ten years. Suitable for operating temperature in the range -30 C to +200 C.

Manufactured in accordance with a wide range of international standards and approvals such as TV (Germany) to AD Merkblatt A2, National Board UV Stamp to ASME Section VIII Division 1, GOST/RTN, and compliant with the requirements of the Pressure Equipment Directive 97/23/EC (CE marked).

The extremely robust pressure transmitters SPT are ideal for measurements of absolute and overpressure in non-crystallizing liquids, gases and vapors. The wide range of applications includes hydraulics, mobile hydraulics, pneumatics, refrigeration, medical technology, gas technology, energy and process engineering and automation in mechanical engineering, where pressure measurement technology is recorded and evaluated as a process variable.

We are termed as Crackerjacks in this product range not just by our Satisfied Customers but even by our Rivals. Besides, we have the fastest turn around time in the Industry.
Base Material : Polycarbonate / Polyester 1. These can be provided in various finishes (viz. Gloss/Polished, Matt, Velvet, Suede etc.) in different standard available thickness.2. With a wide range of colours to select from -- metallic or non-metallic --- different densities of glitter/ sparkle can be provided in metallic shades.3. Can provide selective chrome (i.e. mirror finish ) gold / silver or holographic effect.4. With or without embossing of the desired shape & of desired height within the tolerance range.5. To suit the substrate on which the panel is applied, the adhesive will be accordingly provided.
Dead Front Back Lit Applications -- used in the Home Appliances Industry, used by various Industrial Equipment Manufacturers ( for Name plates), used as Indicator Panels in Vehicles, etc.
Polycarbonate : Polycarbonate used is of GE Plastics.the brand name being LEXAN. LEXAN polycarbonate films offer an unusual combination of features including clarity, dimentional stability, toughness, flexibility, heat resistance. The versatile performance of these products suggests a variety of applications including nameplates, packaging, cable wrapping, automotive instrument clusters, membrane switch overlays, and others.
Polished /Gloss : Virtually defect free.Particularly effective for LED/LCD windows.Matt : Light Diffuser. Hides filaments and eliminates "hot spots" in back lit applications. Offers reduced surface reflections and gloss. Hides scratches, fingerprints and marring for heavy-use applications.Polyester: Compared to polycarbonate, polyester is much more chemically inert. It is comparatively much more abrasion resistant, heat resistant --- more stable at higher temperatures. It is also used for Industrial applications where wear n tear and abuse of the product is likely. Is always preferred/ specified to be used in Membrane Switches.
Polyester has a much higher Flex life as compared to polycarbonate. Flex life= the number of actuations that can be made with the embossed button without the material cracking. It is about 5 million for polyester.and about 5 lakhs for polycarbonate.

These are Self Adhesive Labels used for the Decoration and Markings of Vehicles of various types & for other Equipments exposed to weathering or requiring a long life. These labels are mostly offered with a removable Application Tape.

The newly developed conduit pressure sensor SPT-Si is specially designed for measuring small pipepressures from 0.10 mBar = 0.100 mmWk. Both air and fluid pressure are measured, relative to absolutepressure. The sensor is supplied with M12 or (Hirschmann) connector or wired cable.The silicon measuring brace is very accurate in the conversion of pressure to Volt or mA output, standard accuracy 0.5% of the measuring range.

Flow measurement is the quantification of bulk fluid movement. Flow can be Measured in a variety of ways.positive-displacement flow meters accumulate a fixed volume of fluid and then count the number of thimes the volume is filled ot measure flow.other flow measurement mothods rely on forces produced by the flowing stream as it overcomes a known constriction to indirectly calculate flow. flow may be measured by measureing the velocity of fluid over a known area.

We offer a broad portfolio of flow measurement instruments.

Add-on System for Conventional Safety Valve Test Benches

• Automated
• Set Pressure measurement
• Condition Rating measurement
• Electronic bubble count leak rate test
• Detailed analysis of valve operation
• Computerized test records
• Test results printout for certificate
• Patented worldwide

Seetru Quicktester

BSP & NPT Connections From 1/4 to 2Standard Maximum Operating Pressure Up to 55 bar/797.71 psi

Features & Benefits

• Simplifi ed valve testing, for compliance with pressure systems safety & equipment regulations
• Enables rapid valve testing in complete safety
• Highly portable, compact design (subject to suitable compressed air supply)
• Suitable for use on wide range of valves
• Accurate, unambiguous pressure readout
• Very low consumption of supply medium
• Bench top or carry case version available
• Easy to use and maintain
• Manufactured to quality system compliant with ISO9001
• Supplied with comprehensive instructions
• Pressure gauges supplied as optional extras
• Supplied with a range of thread size adaptors

We manufacture special duty compensators for high pressure applications with specialized end fittings of materials like Aluminum Bronze etcThis product is being used for marine applications and defense establishments in India

Digital programmable pressure transmitter with fluh diaphragm, for measuring relative and absolute pressures. A special weld-infitting helps to create ahygienic process connection. Adjustable with an optional programming tool for turn-down 1:4, zero-point, damping and diverse unit of measure. Pressure:-1/0 bar 0/50 mbar up to 0/100 bar Output:4.20 mA0.5 V0.10 V0, 5.4, 5 V rat

The Seetru Seeflex gauge is designed for use within the marine and offshore industries for tanks containing fl ammable liquids.The Seefl ex gauge meets the requirements of SOLAS (Safety Of Lives At Sea), and is also type approved by many worldwideshipping authorities including; Det Norske Veritas (DNV), RINA, Lloyds Register of Shipping, Nippon Kaiji Kyokai and Bureau Veritas.

This gauge is commonly used for fuel oil, hydraulic oil and lubrication oil tanks of cargo shops and work boats.

The Seetru Marine gauge is designed for use within the marine and offshore industries. Due to it's tubular design this gauge is suitable only for use with non-fl ammable liquids. For flammable liquid applications please see either Seeflex (G31) or Seemag gauges (G35).

This gauge is commonly used for the water storage and coolant tanks on board cargo ships, tugs and military vessels.

Digital programmable pressure transmitter with fluh diaphragm an multi-adjustable process connections e.g. Clamp, DIN &ANSI flanges, for measuring relative and absolute pressures. Adjustable with an optional programming tool for turn-down 1:4, zero-point, damping and diverse unit of measure.

The Seetru Seemag tank content indicator or gauge is a high quality yet economical magnetic level indicator. Its unique design offers considerable advantages over conventional magnetic gauges including accurate step-less reading with all round visibility and the option of high/low level alarms with remote digital reading.

The Seemag gauge meets the requirements of SOLAS (Safety Of Lives At Sea), and is also type approved by many worldwide shipping authorities including; Det Norske Veritas (DNV), RINA, Lloyds Register of Shipping, American Bureau of Shipping (ABS) and Germanischer Lloyds.

The Seetru Admiralty liquid level gauge has been specifi cally designed to meet the stringent standards required by the Ministry of Defence for design, material selection and certifi cation, including shock testing. With a tubular glass indicator the G20 utilises an ingenious fl exible fi xing system which enables multi-angle and directional mounting capabilities.

For flammable liquid applications please see either Seeflex (G31) or Seemag gauges (G35).

An Air Compressor is a device that converts power (usually from an electric motor, a diesel engine or a gasoline engine) into kinetic energy by compressing and pressurizing air, which, on command, can be released in quick bursts. There are numerous methods of air compression, divided into either positive-displacement or negative-displacement types

We offer various types of air compressors and spares based on their design and operating principles.

These are large sized Four Colour Printed Posters.Base material can be PET , POLYCARBONATE , PVC , MIRROR SILVER PET .These can be embossed / thermoformed , selectively Domed. for Applying one can use Removable adhesive , Magnets etc.

Wellan 2000 :Wellan 2000 technology for improving the quality of water and its effects are just starting to become more and more popular, itsprinciples are already being applied in many other areas. You only need to look at computer technologies, magnetic stripes on credit cards, photography, CDs, etc. In fact, there are respected physicists working on creating a quantum computer as we speak.

A number of renowned physicist work on the development of a quantum computer. The aim is to utilise the storage capacity of a liquidmolecules (e.g., water), which is infinite on a certain level. Thus the function and the efficiency of Wellan 2000 is not a matter of credencebut it is simply a forward looking technology from the sector of quantum physcis which opens up numerous interesting possibilities.

WELLAN 2000 has has proved its worth in many sectors, both in private household andin industries for the last 15 years. We are able to look back upon ten thousand very content customers.

• NO CHEMICAL
• NO ELECTRICITY
• NO FILTERS
• NO MAGNETS
• NO MAINTENANCE

These can be provided in various finishes (viz. GlossPolished, Matt, Velvet, Suede etc.) in different standard available thickness. With a wide range of colours to select from -- metallic or non-metallic --- different densities of glitter sparkle can be provided in metallic shades. Can provide selective chrome (i.e. mirror finish ) gold silver or holographic effect. With or without embossing of the desired shape & of desired height within the tolerance range. To suit the substrate on which the panel is applied, the adhesive will be accordingly provided.

The Seetru range of safety valves for liquid applications has been designed to be compact and highly effi cient. The bubble-tightsealing performance makes these valves suitable for many liquid applications including; hydraulic systems, pumping systems, thermal relief, chemical storage, waste water management, oil transfer, petrochemical industry, fi re fi ghting equipment and watercooling systems. Suitable for temperatures up to 250 C.

The valves are GOST/RTN approved and comply with the requirements of Pressure Equipment Directive 97/2/EC (CE Marked).This range of valves has the option of either elastomer sealing or metal-to-metal sealing.

The Seetru range of safety valves for refrigeration applications are designed to meet the needs of the refrigeration industry, offering safety valve technology for compressor manufacturers, industrial refrigeration, commercial refrigeration, ice makingsystems and air conditioning. The valves are compact and designed with bonded sealing technology and the highest possible sealing performance to comply with most stringent environmental standards. Each valve is leak tested to better than 10-5 mbar litres/sec on Helium. This is equivalent to a leakage rate of less than 1oz in ten years. Suitable for operating temperature in the range -30 C to +200 C.

Manufactured in accordance with a wide range of international standards and approvals such as TV (Germany) to AD Merkblatt A2, National Board UV Stamp to ASME Section VIII Division 1, GOST/RTN, and compliant with the requirements of the Pressure Equipment Directive 97/23/EC (CE marked).

The extremely robust pressure transmitters SPT are ideal for measurements of absolute and overpressure in non-crystallizing liquids, gases and vapors. The wide range of applications includes hydraulics, mobile hydraulics, pneumatics, refrigeration, medical technology, gas technology, energy and process engineering and automation in mechanical engineering, where pressure measurement technology is recorded and evaluated as a process variable.

We are termed as Crackerjacks in this product range not just by our Satisfied Customers but even by our Rivals. Besides, we have the fastest turn around time in the Industry.
Base Material : Polycarbonate / Polyester 1. These can be provided in various finishes (viz. Gloss/Polished, Matt, Velvet, Suede etc.) in different standard available thickness.2. With a wide range of colours to select from -- metallic or non-metallic --- different densities of glitter/ sparkle can be provided in metallic shades.3. Can provide selective chrome (i.e. mirror finish ) gold / silver or holographic effect.4. With or without embossing of the desired shape & of desired height within the tolerance range.5. To suit the substrate on which the panel is applied, the adhesive will be accordingly provided.
Dead Front Back Lit Applications -- used in the Home Appliances Industry, used by various Industrial Equipment Manufacturers ( for Name plates), used as Indicator Panels in Vehicles, etc.
Polycarbonate : Polycarbonate used is of GE Plastics.the brand name being LEXAN. LEXAN polycarbonate films offer an unusual combination of features including clarity, dimentional stability, toughness, flexibility, heat resistance. The versatile performance of these products suggests a variety of applications including nameplates, packaging, cable wrapping, automotive instrument clusters, membrane switch overlays, and others.
Polished /Gloss : Virtually defect free.Particularly effective for LED/LCD windows.Matt : Light Diffuser. Hides filaments and eliminates "hot spots" in back lit applications. Offers reduced surface reflections and gloss. Hides scratches, fingerprints and marring for heavy-use applications.Polyester: Compared to polycarbonate, polyester is much more chemically inert. It is comparatively much more abrasion resistant, heat resistant --- more stable at higher temperatures. It is also used for Industrial applications where wear n tear and abuse of the product is likely. Is always preferred/ specified to be used in Membrane Switches.
Polyester has a much higher Flex life as compared to polycarbonate. Flex life= the number of actuations that can be made with the embossed button without the material cracking. It is about 5 million for polyester.and about 5 lakhs for polycarbonate.