The Seetru GS56 is a high quality control valve designed to handle a two-stage operation for air starting of engines. Air starting is typically used for diesel engines. The GS56 is bolted onto the air receiver vessel and integrates all the necessary functions and connections into one highly effective unit. It controls charging of the pressure vessel with the air for starting and it controls the flow of the air to the engine to start the engine. Incoming air and outgoing air are kept separate to comply with regulations.The unit configuration is designed so that any oil or water in the air supply collects in the receiver, Thus maximising the cleanliness of the air which flows to the engine.

The Seetru range of safety valves for steam applications are compact and highly effi cient, designed with the exclusive Tutchtite sealing technology offering repeatable bubble-tight sealing performance. Typical uses of these valves include autoclaves, pharmaceutical industry, vending machines, hot water boilers, steam boilers and plants as well as clean steamapplications. Suitable for use up to 250 C and minimum dryness factor of 0.97.

Manufactured in accordance with a wide range of international standards and approvals such as TV (Germany) to AD Merkblatt A2, National Board UV Stamp to ASME Section VIII Division 1, GOST/RTN, and compliant with the requirements of the Pressure Equipment Directive 97/23/EC (CE marked).

These valves are available with a wide range of sealing materials and technologies as well as a comprehensive range of manual relieving devices to suit application requirements.

The Seetru range of safety valves for compressed air and gas are compact, highly effi cient and incorporate the exclusive Tutchtite seal technology for repeatable bubble-tight sealing performance. Designed for applications including; air/gas compressors, specialist gas plants, chemical equipment and piping, pressure vessels, thermal relief and medical gases etc.These valves are manufactured in bronze, brass or stainless steel and offer a wide range of connections, for applications up to 250 C. Manufactured in accordance with a wide range of international standards and approvals such as TV (Germany) to AD Merkblatt A2, National Board UV Stamp to ASME Section VIII Division 1, GOST/RTN, and compliant with the requirements of the Pressure Equipment Directive 97/23/EC (CE marked).These valves are available with a wide range of sealing materials and technologies as well as a comprehensive range of manual relieving devices to suit application requirements.

he Seetru 'CP' & QP Range

The Seetru range of safety valves for cryogenic & liquefi ed gas applications are built using Seetru sealing technology, suitable for temperatures down to -196 C, and pressures up to 370 bar. Available with PTFE, PPS or metal-to-metal sealing.These valves are manufactured to meet demanding applications which include being used on pressure vessels/receivers, pressure equipment and piping, cryogenic plants including oxygen and special gases, cryogenic compressor applications, container lorry/cryogenic trailers, industrial freezing, liquefi ed gas storage and fi re fi ghting equipment.Manufactured in accordance with a wide range of international standards and approvals such as TV (Germany) to AD Merkblatt A2, National Board UV Stamp to ASME Section VIII Division 1, GOST/RTN, and compliant with the requirements of the Pressure Equipment Directive 97/23/EC (CE marked).

The Seetru GS56 is a high quality control valve designed to handle a two-stage operation for air starting of engines. Air starting is typically used for diesel engines. The GS56 is bolted onto the air receiver vessel and integrates all the necessary functions and connections into one highly effective unit. It controls charging of the pressure vessel with the air for starting and it controls the flow of the air to the engine to start the engine. Incoming air and outgoing air are kept separate to comply with regulations.The unit configuration is designed so that any oil or water in the air supply collects in the receiver, Thus maximising the cleanliness of the air which flows to the engine.

The Seetru range of safety valves for steam applications are compact and highly effi cient, designed with the exclusive Tutchtite sealing technology offering repeatable bubble-tight sealing performance. Typical uses of these valves include autoclaves, pharmaceutical industry, vending machines, hot water boilers, steam boilers and plants as well as clean steamapplications. Suitable for use up to 250 C and minimum dryness factor of 0.97.

Manufactured in accordance with a wide range of international standards and approvals such as TV (Germany) to AD Merkblatt A2, National Board UV Stamp to ASME Section VIII Division 1, GOST/RTN, and compliant with the requirements of the Pressure Equipment Directive 97/23/EC (CE marked).

These valves are available with a wide range of sealing materials and technologies as well as a comprehensive range of manual relieving devices to suit application requirements.

The Seetru range of safety valves for compressed air and gas are compact, highly effi cient and incorporate the exclusive Tutchtite seal technology for repeatable bubble-tight sealing performance. Designed for applications including; air/gas compressors, specialist gas plants, chemical equipment and piping, pressure vessels, thermal relief and medical gases etc.These valves are manufactured in bronze, brass or stainless steel and offer a wide range of connections, for applications up to 250 C. Manufactured in accordance with a wide range of international standards and approvals such as TV (Germany) to AD Merkblatt A2, National Board UV Stamp to ASME Section VIII Division 1, GOST/RTN, and compliant with the requirements of the Pressure Equipment Directive 97/23/EC (CE marked).These valves are available with a wide range of sealing materials and technologies as well as a comprehensive range of manual relieving devices to suit application requirements.

he Seetru 'CP' & QP Range

The Seetru range of safety valves for cryogenic & liquefi ed gas applications are built using Seetru sealing technology, suitable for temperatures down to -196 C, and pressures up to 370 bar. Available with PTFE, PPS or metal-to-metal sealing.These valves are manufactured to meet demanding applications which include being used on pressure vessels/receivers, pressure equipment and piping, cryogenic plants including oxygen and special gases, cryogenic compressor applications, container lorry/cryogenic trailers, industrial freezing, liquefi ed gas storage and fi re fi ghting equipment.Manufactured in accordance with a wide range of international standards and approvals such as TV (Germany) to AD Merkblatt A2, National Board UV Stamp to ASME Section VIII Division 1, GOST/RTN, and compliant with the requirements of the Pressure Equipment Directive 97/23/EC (CE marked).