Advance Addmine Pvt. Ltd.

Vastrapur, Ahmedabad, Gujarat

Add white XT is a white pigment derived from precipitating the sulphate group under the control condition, additional post production treatment of TiO2 particle designed to draw a opacifiyng white pigment applies classification technology to separate fine and even shape particle can act as a spacer helps to better light reflection and glossy nature maintain flow behaviour and moderate the process of end product.
New generation white pigment has been specially designed to meet most demanding requirement of various applications. Add White XT well disperse in any medium imparts high brightness and excellent white shade.

Advantages :

• Cost effective white pigment
• Absolute white in colour
• TiO2 extension up to 30%
• Well disperse with carrier resin
• Better opacity and gloss finish
• Improves wreathing properties
• Better strength
• No odor effect at high temperature

Applications :

• Pigment base Master batches
• In various Paints applications
• Ceramic applications
• In many ink formulations

Add white XRT is a white pigment derived from precipitating the sulphate group under the control condition, additional post production treatment of TiO2 particle designed to draw a opacifying white pigment applies classification technology to separate fine and even shape particle can act as a spacer helps to better light reflection and glossy nature maintain flow behaviour and moderate the process of end product.
New generation white pigment has been specially designed to meet most demanding requirement of various applications. Add White XRT well disperse in any medium imparts high brightness and excellent white shade.

Advantages :

• Cost effective white pigment
• Absolute white in colour
• TiO2 extension up to 30%
• Well disperse with carrier resin
• Better opacity and gloss finish
• Improves wreathing properties
• Better strength

Applications :

• Pigment base Master batches
• In various Paints applications
• Ceramic applications
• In many ink formulations

ADD BASO T has a narrow particle range distributions immense specific surface area and low binder requirement properties & use as higher loading masterbatches applications.
Due to chemical production process with grinding technology ADD BASO T having no impurities, gaining more & more significance . an indispensable additives results good weathering properties impart a better gloss & shin in end applications.

Advantages :

• Better gloss & shine
• Absolute white & brilliance in colour
• Partial replacement of polymer
• Act as a spacer in polymer filer matrix
• Better dispersion with higher loading

ADD PLAST C is a synthetic wax used as a dispersing agent or internal / external lubricant for benefits in plastic and rubber applications to facilitate and stabilize the dispersion of solid compounding materials to enhance process ability, to decrease friction and abrasion of the polymer surface, and to contribute color stability and polymer degradation.
ADD PLAST C is also used in process industries as release agent, antistatic agent and antifoaming agent for the production of thermoplastics, wiring and cable. It is used in powder coating.

Advantages :

• Reduce degradation & restrict plate out during the process
• Homogeneous dispersion prevent melt fracture during high shear extrusion
• Eliminate all conventional lubricants & used as a one pack form
• Minimize water carry in tap plant

Applications :

• Pigment base masterbatches
• Use in various rubber formulations
• PVC Pipes, profile & sheet applications
• Wire & Cables and many alloys of PVC
• Raffia & Antifab compound
• Calcium & Talc filled compound

Storage Conditions : Should be stored in dry and at room temperature

ADD BASO BR derived from Natural Barium Sulphate Lumps, having better Purity & Whiteness.
ADD BASO BR very fine Particle Size & Low Oil Absorption in White & Colour Masterbatch. Excellent Coverage in Paints Applications.

Advantages :

• Better Dispersion & Flow Properties
• Better Gloss, Higher Opacity & RI
• Low Oil Absorption
• Good Compatibility with Polymers & Resins

Recommended Applications :

• White & Colour Masterbatches
• Paints & Powder Coating Industries
• Construction Chemical

Add Plast T is organic compound acts as a multifunctional processing aid. Derived from complex esters, long chain alcohol & fatty acids derivatives, good hydrophobic nature can able to provide excellent dispersion, better release properties & modify flow during the process with carrier resin filler, pigment & any additives.
Add Plast T having low melting functional additive can perform at low addition impart to increase higher filler loading, better coupling & improves mechanical properties, appearance advantages are evident in end product.

Advantages :

• Eliminate all conventional lubricants & used as a one pack form
• Minimise water carry in tape plant
• Reduce degradation & restrict plate out during the process
• Homogeneous dispersions prevent melt fracture during the high shear extrusion

Applications :

• Calcium & Talc Filled Compound
• Raffia/Antifab Compound
• Pigment base Master Batches
• Cable Compound
• EVA/ TPR/ TPE Compound

Use Level : 0.4-0.7% used in coated fillers & 1.2-1.5% recommended for uncoated fillers however optimum performance level depends on polymer/filler ratio & hardware conditions

ADD PLAST RYN Speciality additive developed for anti fibrillation masterbatches, compounds to reduce water carry over problem on high line speed tape plant with high speed operation.

Advantages :

• Better Homogeneous dispersion of fillers and pigments
• Lower viscosity and improves flow at higher processing temperatures
• Reduces water carry over on tape line during high speed operations
• Improves the strength of the tape
• Improves surface finish and gloss of product

Applications :

• Use of ADD PLAT RYN in higher filler compounds enables to run the anti fibrillation masterbatches High Speed tape line at higher loading of filler compound, with minimum processing problems
• Polyolefin based colour masterbatches
• Suitable for highly filled CaCO3 and talc based polyolefinic compounds

Add Lub CS is calcium stearate derived from Cao & Fatty acid through fusion reaction under control process conditions.
Add lub CS is yellowish white powdery, non toxic, free flowing product can reduce friction & increase flow rate during the process
Add Lub CS uses as a secondary stabilizer in many PVC applications.

Advantages :

• Improves dispersion & mechanical properties
• Balance internal & external lubrication effect
• Eliminates agglomerations of pigments
• Co-Stabilizer in PVC applications
• Improves shine & gloss in end product

Applications :

• Mainly use in PVC cable compounding
• PVC Sheet & Films
• PVC Profile & Roofing
• As a lubrication in Antifeb / Raffia compound

Add Lub ZS is derived from high quality stearic acid in controlled production condition & that gives the product uniformity .It is in pure white colour powder with consistent properties. It is insoluble in water but dissolves in benzene & other hydrocarbon at high temperature.
Add Lub ZS is widely uses as additives in plastics & rubber applications. It provides excellent lubrication & mould release properties in various formulations. It improves the processing of styrene & polyester compound at lower addition level.

Advantages :

• Act as external lubricants in many plastic processing
• Good module release agent in various compounding
• Excellent activator for rubber vulcanization
• Provide better hydrophobic effect in many system
• Better stabilization against commodity lubricants

Applications :

• Polyolefin & PVC compound
• SMC & DMC Compound
• Rubber & Eva Processing
• Paint & Wood Finish Applications
• Cosmetics & Pharmaceutical

Add Plast RN is organic materials, having amphipilic nature is derived from aliphatic & aromatic esters, fatty acids derivatives can able to good release properties & modify flow during the process with carrier resin, filler, pigment & any additives.
Add Plast RN is multifunctional processing aid acts as external & internal lubricants in many applications like pigment base master batches, Eva compound, antifeb etc.

Advantages :

• By adding Add Plast RN together with fillers, more uniform dispersion is achieved, even in heavily filled compounds
• Lower viscosity can minimise addition level & resultant reduced mixing time also energy saving
• Suitable chemistry with carrier resin imparts excellent dispersion & melt dispensability
• Other benefits like prevent melt fracture during high shear extrusion, no plate out & excellent lacing resistance during the process
• In Pigment and Masterbatch improves colour strength and glo

Applications :

• Antifeb / Raffia Compound
• Automotive/ Engineering Compound
• Cable Compound
• EVA/TPR/TPE Compound
• PVC and Rubber alloy compounds
• PVC Sheets and Films
• Additive Masterbatches

Use Level : 0.5-0.8% used in coated fillers & 1.0-1.5% recommended for uncoated fillers however optimum performance level depends on polymer/filler ratio & hardware conditions

Add Plast Pro is derived from blend of metal soap, fatty acid & amide under control process conditions can act as external lubricants as well as internal functionalised dispersing aid for highly filled polyolefin compounds. It act as better accelerator in various rubber applications.
Add Plast Pro is unique dispersing aid can offers remarkable improvement in processibility, improves excellent dispersion & better glos properties.

Advantages :

• Highly effective dispersing aid can eliminates pigment agglomeration & spots
• Reduce compacting & dusting of pigments during process
• Better heat stabilities against conventional lubricants
• No migration to the surface of the article
• Reduce the cyle time & provide better dimensional properties
• Main advantages to improved better gloss & shine in black masterbatches

Applications :

• Specially recommended for Black Master Batches
• Thermoplastics rubber & blends of EVE-TPE compound
• Antifab/Raffia compound
• Pigment base Master Batches

Use Level : 0.4-0.7% used in coated fillers & 1.2-1.5% recommended for uncoated fillers however optimum performance level depends on polymer/filler ratio & hardware conditions

ADD PLAST OP is synthetically derived from oleo chemical derivatives under the control hydrogination process having in flakes / beads form.
ADD PLAST OP act as a internal as well as external lubricants in many applications like organic pigment base masterbatches.
ADD PLAST OP is viscosity modifier, im proves the processing and avoid to migrate in PVC applications.

Advantages :

• High thermal stability & low vdatality
• Better weathering & avoid to migrate
• Excellent gloss properties
• Moderate slow & avoid decomposition
• Improves processing & dispersion
• Better wetting & excellent release

Applications :

• Orvanic Pigment base Masterbatches
• PVC Cable, Pipes, Sheets & Films Compound
• Engineering &Automotive Compound
• Additive Masterbatches
• TPR &TPE Compound

Recommended Dosage : 0.5-0.8% for coated fillers & 1.0-1.5% for uncoated fillers however optimum performance level depends on polymer/filler ratio & hardware conditions

Storage Conditions : Keep in cool, dry & ventilated conditions

ADD PLAST PE is polythylene wax acts as external lubricants in many applications like plastics, paints, rubber & ink applications.

Applications & Advantages :

Polyolefins : (Pigment Masterbatch / Antifeb / Raffia / PP Compound) :

• External dispersion
• External lubricant
• Flow improver
• Lower plate out

Rigid / Soft PVC : (Pipe / Profile / Cable) :

• Better release properties
• Flow improver
• Better gloss & clarity
• Decrease fusion
• Maintain mechanical properties
• Increase gelation

EVA / Rubber / Alloys :

• Better mixing & minimize cycle time
• Improves surface finish
• Better mechanical properties

Recommended Dosage :

• 0.4-0.8 pHR PVC
• 0.5- I .5% Polyolefin

Storage Conditions : Keep in cool, dry & ventilated conditions