Ador Powertron Limited

Chinchwad, Pune, Maharashtra

Power+ is next generation True Modular - Upgradeable Online UPS. The system comprises 1 to 10 UPS modules of 10kVA each, a system controller, static switch module, and distribution block. The flexible system is user upgradable from 10kVA to 100kVA. UPS modules are designed for hot insertion. Power+ is a true online battery in which the inverter supplies the power to the load and takes its power either from the AC input (via the rectifier) or from the battery. The rectifier is controlled to recharge the battery and maintain it in charged condition. The battery is galvanically connected between the rectifier output and the inverter input on a common DC link. Range : 10-500 kVA Features

• Modular Upgradable UPS
• Hot Swap - Plug In Modules
• Inbuilt Redundancy
• Green Power
• True On-line Battery VFI
• Smaller Footprints
• Low Heat Dissipation
• High Efficiency
• Flexible Use - (1Φ/1Φ, 3Φ/1Φ, 3Φ/3Φ)
• Built In SNMP

Power+ 19" is small version to Power+ Classic an excellent product for Server rooms and critical industrial PLC load as it's a Rack mount UPS with similar features of Power+ Classic. This solution comes in a small pack of 10 kVA and 20 kVA in 19" rack. Range : 10-20 kVA Features

• Modular Upgradable UPS
• Hot Swap - Plug In Modules
• Inbuilt Redundancy
• Green Power
• True On-line Battery VFI
• Smaller Footprints
• Low Heat Dissipation
• High Efficiency
• Flexible Use - (1Φ/1Φ, 3Φ/1Φ, 3Φ/3Φ)
• Built In SNMP

HP Series is a True Online double conversion UPS with high frequency transformer less design available in 1/2/3 kVA capacity. It is fully Microprocessor control system with wide input voltage range. This UPS employs the Advance PFC technology with intelligent Battery Management System. Range : 1-20 kVA Features

• High Input Power Factor
• Green Power
• LCD Display
• Light & Compact Design.
• Fully Microprocessor Controlled
• High efficiency
• Short Circuit & Overload Protection
• EMI/RFI Noise Filter
• Charger for Longer Backup
• Automatic Bypass
• Inbuilt Batteries option for small backup

The Master & Prime series systems are online double-conversion UPS system with a power range of 6kVA to 100kVA. It is available in stand-alone, hot standby and parallel configurations, in 1/1, 3/1 and 3/3 models. The state of the art design provides high quality, stabilized sine-waves signals. A static switch provides the optimal solution for output inrush current and overload problems. All require & important parameters (input/output voltage, currents, frequencies, DC voltage, charging & discharging current) are measured and shown in an LCD display. All information may be sent to the host computer through an RS232 interface, with SNMP management. Range : 6-100 kVA Features

• True Double Conversion Online topology
• State of the art digital control
• Inbuilt Output isolation transformer
• Rectifier/charger for extended backup time
• Designed to work with symmetrical and non-symmetrical, linear and non-linear loads
• Large LCD display
• RS232 interface for smart software and SNMP (Optional) management.

The μPS-SP series features three-phase online double-conversion UPS system with a power range of 10kVA to 250kVA. It is available in stand-alone and parallel configurations, in both 3/1 and 3/3 models. The system supplies high quality, stabilized sine-waves signals. A static switch provides the optimal solution for output inrush current and overload problems. All parameters (input/output voltage, currents, frequencies, DC voltage, and temperatures) are measured and shown in an LCD display. All information may be sent to the host computer through an RS232 interface, with SNMP management. Range : 10-250 kVA Features

• True duble conversion online topology
• Fully microprocessor controlled
• Output isolation transformer
• Rectifier/charger for extended backup time
• Automatic and manual battery tests
• Designed to work with symmetrical and non-symmetrical, linear and non-linear loads
• Large LCD display
• Logs up to 256 events
• RS232 interface for smart software and SNMP management

Power+ SA 10/20/30/40kVA is one of the most sophisticated Stand-alone On-line double-conversion UPS system.Power+ SA continually eliminates surges, spikes and sags that are inherent in commercial utility power. Over time, these irregularities shorten the life of equipment and components. The efficiency of Power+ SA thus helps to extend the life of your equipment, even through normal use when the input power system is constant and continuous. Power+ SA 20/30/40 kVA is a parallel redundant UPS - in the event of a failure of one power board, the UPS continues to operate and the remaining power boards compensate for the missing board (within limits). Range : 10/20/30/40 kVA Features

• Unique Design - Light & Compact
• Green Power
• True On-line Battery VFI
• Low Heat Dissipation
• High Efficiency
• Flexible Use - (1/1, 3/1, 3/3)
• Built In SNMP