We offer reliable and economic solution for Level Control and Flow Measuring system. The various products available for the system depending on the client specifications and application requirement are as follows :

Complete Tank transfer, Barrel emptying , Bulk Tank to service tank automation and flow monitoring systems are also offered by us with Automated control panels , Barrel Pumps, Transfer pumps and associated piping etc. If required, the can be inter looped with Dosing systems and Control room also.

In the area of water treatment, Ozone is the most powerful disinfectant available in the Industry. It acts 3000 times faster than chlorine and does not leave behind any toxic substance after the reaction in the water, which is a major problem faced with the use of chlorine. ProMinent Ozone Generator type OZVa are available in capacities of 5, 10, 15, 35 and 40 grams/hour while type BONOZON are available upto 600 grams/hour All ProMinent Ozone Generators conform to Eu standards and are CE certified.

"ProMinent" Sensors and Controllers available for pH , Ozone , Chlorine , Bromine, Chlorine Dioxide, Para Acetic Acid (PAA) , Chlorite, Dissolved Oxygen , Hydrogen Peroxide , ORP, Flouride and Conductivity.

These system are used to automatically control the pH balance of the process liquid. Usually the sensor mounted on suitable sensor housing will be placed inside the tank or in pipeline to measure the actual pH value of the process liquid. This sensor will sense and continuously give the actual pH value of the tank liquid / Pipe line liquid to the pH controller. The controller has provisions for setting of the required pH value (say between 7 to 7.5) . The difference between the actual pH value (as measured by the sensor ) and the required pH value (as set in the controller), will be continuously monitored by the controller and a proportionate signal depending on the difference will be fed to either solenoid valve or Dosing Pump. The solenoid valve or dosing pump in turn will add exact amount of Alkali solution (in case the pH is required to be increased) or Acid solution (in case the pH is required to be reduced) to the process till the required pH value is achieved, thus eliminating any chance of overdosing or under dosing. Based on application requirement , the system can be used to add a single chemical (Either Alkali solution or Acidic solution).

• Continuous process or Batch process
• On line addition or Tank addition application
• Number of Solenoid Valves or dosing Pumps (Single or Double )
• Controller Types ( ON-Off type , PID type (0/4-20 mA Analog), Timing Proportional Gain Type )

The line pH Value and required set pH values are continuousely displayed on LCD screen of Controller. Any change of set value in controller is easily done thru push buttons . Alarm indication for any controller position or pH Status can be taken out. pH Chart recorder or Data logger for recording of controller activities can also be provided.
pH Sensors of various types suitable for different applications such as Steam Sterilizable / PVC body / Glass Body / Refillable types and with different mounting options are available.
Complete system with Skid mounted solution Tanks (HDPE/SS/MS/FRP), Agitators, Solenoid valves or pneumatic valves or Dosing Pumps, Piping, Control panels, Low level switches with complete automation are also provided by us. Documentation package includes all drawings and Installation/operation manuals. Many of our systems are also supplied abroad thru OEM's and fitted with electrical instruments of relevant rating specific to country of use.

We offer an effective and easy to handle chlorination system at economical price. Chlorine meets with the demands of a reliable disinfectant and is most trusted in water treatment. In effectively kills pathogenic micro organisms and also provides residual protection to prevent recontamination.
Our system is easy to handle and install. It includes a dosing tank of suitable capacity for storing chlorine base solution and a dosing pump mounted on the tank with all the accessories for accurate dosing of chlorine. The discharge from dosing pump can be accurately varied to add different quantities of chlorine as per the requirements. The system can be offered with Water meters that will send flow proportionate signal to dosing pump for flow proportionate dosing in case of varying water flow areas. This system is most economical and ideal as it ensures availability of pure water at all points in the area. We also offer Chlorination systems for high capacity requirements with Skids, Tanks, Motorised Stirrers and control panels.
Fully automated systems for Chlorination or De-Chlorination with On-line Total Chlorine sensors, Free Chlorine Sensors, Residual Chlorine sensors, Controllers and Automated panels to ensure desired ppm level for Pharma, Biotech, Food and Beverages industries are also undertaken by us.

Industrial Stirrers (also known as Agitators / Mixers) are regularly provided by us as individual items Or as a part of engineering systems. We have been successfully manufacturing high / medium / slow Speed agitators for varied applications and for different chemicals. The contact parts can be supplied with SS 316, SS 304, MS, Rubber lined, PVC lined, FRP Lined, Teflon Coated to suit different chemicals. Models are also available in Flame proof and multi speed versions. They are manufactured with premium quality raw material and have the advantage of easy installation. Shaft wobbling factor or disorientation, which is a constant problem area in Top entry Vertical shaft agitator is taken care by suitable design . From the basic compact Direct Driven Agitators with Motor directly coupled to Geared Motor driven agitators are available to suit any RPM/Speed requirement. In addition to regularly used Propeller turbine type impellors , other different types such as Paddle, Anchor, Pitch Blade, Screened Vane , Saw tooth, Multi pitch type impellors are also available for different applications. Motors of client preferred make and mountings based on different application conditions are also considered during manufacturing of the Agitators. As a renowned firm, we provide a superior quality range of stirrers that is essential for process industry. Our agitator consists of two parts which is drive and impeller. These are manufactured with premium quality raw material and have the advantages of wear and tear resistance and easy installation. Our agitators require high precision and give a flawless performance.

• Orientation Top Entry, Bottom entry, Angular entry
• Speed variable / fixed / self adjustable (PLC based)
• Mounting fixed, movable
• Type of impeller Turbine, W shape, V Shape, Butterfly
• Blade Single Blade, multi blade

We offer reliable and economic solution for Automation Control and Instrumentation of Engineering Systems and process control.
Automated Control panels, LT panels, PCC , MCC , Capacitor Panels with complete engineering , Bus bar etc as per application requirement are provided by us. Various panel designs such as Desk Panels, Double door Acrylic Panels, Double door Metal Panels, IP 65 panels, Close cabinet panels in MS PC or in SS body are also provided by us.

• Cables from Finolex, Havells etc
• Hardware from Schneider, Siemens, L&T, Salzer, Teknic, Phoenix etc
• Panels from Rittal, BCH etc
• AC Speed drives from Danfoss, Siemens, ABB etc
• Touch screen Display unit from RENU etc
• PLC from GE Fanuc, Siemens, OMRON etc
• For MS Powder Coated Panels as well as SS body panels materials from TATA Steel, JSL, Hindalco etc.

These pumps are solenoid driven and controlled electronically by a PCB. The only moving part is solenoid armature which in turn moves the diaphragm. These pumps are highly versatile, maintenance free and achieves very fine control of flow. The solid PTFE diaphragm construction makes it very strong & durable.
These solenoid driven Diaphragm pumps are best suited for metering applications of up to 55 LPH. The pumps are suitable for a electrical supply of 230 Volt, Single Phase, 50 Hz.
Pumps are routinely available with Liquid End of different MOC's such as PVC, PP, Teflon and SS . Other different MOC's are also available for special applications.
The pump is fitted with Suction NRV and Discharge NRV. LED mounted on front panel gives visual running status of Pump. It is supplied with standard Accessories of Foot Valve with Strainer and Discharge (Anti Syphon - Injection ) NRV and 3 Mtr of suitable Tubings.
Other accessories Like Pressure Release Valve, Pulsation Dampner, Agitators (Stirrers), Dosing Tanks , Level Switches , Flow Meters , Level Indicators, Strainers , Pressure Gauges , Calibration Columns, Automated Control panels are also supplied as per client specifications. Complete customized Skid mounted Dosing system with Control panels and Piping can also be offered to suit any application.

These pumps are Motor driven . Flow is controlled thru knob controllers fitted on the pump or thru AC Speed Drives when ever automatic control is needed. These pumps work on worm gear reduction and diaphragm movement principle. These pumps can also be offered with single or multiple Liquid ends. The diaphragms are made of high quality EPDM with moulded in steel core and liquid contact surface is always of Teflon material, which makes it very strong and durable These motor driven Diaphragm pumps are best suited for metering applications of up to 3000 LPH. The pumps are supplied with Motor suitable for a electrical supply of 3 phase, 415 Volt, 50 Hz. However motor suiting for any other specific electrical rating such as 380 Volt 3 Phase , 230 Volt Single Phase, 60 Hz etc can also be fitted.
Pumps are routinely available with Liquid End of different MOC's such as PVC, PP, Teflon and SS . Other different MOC's are also available for special applications.
The pump is supplied with Suction NRV and Discharge NRV fitted on Liquid end.
Other accessories Like Foot Valve, Dosing (Injection - Anti Syphon Valve) , Tubings/Hoses, Pressure Release Valve, Pulsation Dampner, Agitators (Stirrers), Dosing Tanks , Level Switches , Flow Meters , Level Indicators, Strainers , Pressure Gauges , Calibration Columns, Automated Control panels are also supplied as per client specifications. Complete customized Skid mounted Dosing system with Control panels and Piping can also be offered to suit any application.

We offer a wide range of Skid Mounted Chemical Dosing Systems with controls and instrumentation which are customized as per application requirements. We offer from the basic economical dosing systems with simple features to fully automated systems with DCS / SCADA panel etc.
The MOC of tanks can be of SS 304 / SS 316 / HDPE / MS / FRP / PP etc based on requirement. The piping also can be of SS / GI / UPVC / CPVC etc based on specifications. Depending upon application requirement and client specifications, the metering system may consist of following :

All equipments are customized to be economical and suit individual application requirements. These systems offers robust construction , smooth operation, User friendly features with complete automation and easy Assembly at site.
Owing to the customized in-house design and manufacturing technique, our clients always remain in gains for the competitive prices that we maintain.

Our polyelectrolyte systems known as "POLYMAT" are specially designed for automatic preparation of polymer solutions either from powder polymers or liquid polymer concentrate as per required gpl or % concentration. The central function, which is to dissolve powder polymers in proportionate to process requirement, makes the plant ideally suited to a variety of technical processing applications, e.g. in Paper Industry, Beverages, Textiles, Cement, Food processing , Water treatment industry etc. It may be used for nearly all available commercial powder polymers and liquid concentrates. Controlled by the in built Process Controller Program, concentrations may be preprogrammed within a range of 0.01% to 2.0% (0.1 gpl to 20 gpl). Different versions of POLYMAT units are available which can be used with either Powder Polymer or Liquid Polymers or Both. Please refer followed "POLYMAT" System Selection Chart for finalizing between different Capacity / MOC/Configuration.

The MOC of tanks can be of SS 304 / SS 316 / HDPE / MS / FRP / PP etc based on client requirement. Depending upon application requirement and client specifications, the Polymat system may consist of following :

All equipments are customized to be economical and suit individual application requirements. These systems offers robust construction , smooth operation, User friendly features with complete automation and easy Assembly at site. Owing to the customized in-house design and manufacturing technique, our clients always remain in gains for the competitive prices that we maintain.

Superior and consistent Polymer Solution Quality, Prevention of unwanted gelatinous lump formation (commonly known as "Fish eye"), More Economic Use of Polymer, Minimum Operator Involvement, Immediate Installation and Commissioning,

We offer reliable and economic solution for Level Control and Flow Measuring system. The various products available for the system depending on the client specifications and application requirement are as follows :

Complete Tank transfer, Barrel emptying , Bulk Tank to service tank automation and flow monitoring systems are also offered by us with Automated control panels , Barrel Pumps, Transfer pumps and associated piping etc. If required, the can be inter looped with Dosing systems and Control room also.

In the area of water treatment, Ozone is the most powerful disinfectant available in the Industry. It acts 3000 times faster than chlorine and does not leave behind any toxic substance after the reaction in the water, which is a major problem faced with the use of chlorine. ProMinent Ozone Generator type OZVa are available in capacities of 5, 10, 15, 35 and 40 grams/hour while type BONOZON are available upto 600 grams/hour All ProMinent Ozone Generators conform to Eu standards and are CE certified.

"ProMinent" Sensors and Controllers available for pH , Ozone , Chlorine , Bromine, Chlorine Dioxide, Para Acetic Acid (PAA) , Chlorite, Dissolved Oxygen , Hydrogen Peroxide , ORP, Flouride and Conductivity.

These system are used to automatically control the pH balance of the process liquid. Usually the sensor mounted on suitable sensor housing will be placed inside the tank or in pipeline to measure the actual pH value of the process liquid. This sensor will sense and continuously give the actual pH value of the tank liquid / Pipe line liquid to the pH controller. The controller has provisions for setting of the required pH value (say between 7 to 7.5) . The difference between the actual pH value (as measured by the sensor ) and the required pH value (as set in the controller), will be continuously monitored by the controller and a proportionate signal depending on the difference will be fed to either solenoid valve or Dosing Pump. The solenoid valve or dosing pump in turn will add exact amount of Alkali solution (in case the pH is required to be increased) or Acid solution (in case the pH is required to be reduced) to the process till the required pH value is achieved, thus eliminating any chance of overdosing or under dosing. Based on application requirement , the system can be used to add a single chemical (Either Alkali solution or Acidic solution).

• Continuous process or Batch process
• On line addition or Tank addition application
• Number of Solenoid Valves or dosing Pumps (Single or Double )
• Controller Types ( ON-Off type , PID type (0/4-20 mA Analog), Timing Proportional Gain Type )

The line pH Value and required set pH values are continuousely displayed on LCD screen of Controller. Any change of set value in controller is easily done thru push buttons . Alarm indication for any controller position or pH Status can be taken out. pH Chart recorder or Data logger for recording of controller activities can also be provided.
pH Sensors of various types suitable for different applications such as Steam Sterilizable / PVC body / Glass Body / Refillable types and with different mounting options are available.
Complete system with Skid mounted solution Tanks (HDPE/SS/MS/FRP), Agitators, Solenoid valves or pneumatic valves or Dosing Pumps, Piping, Control panels, Low level switches with complete automation are also provided by us. Documentation package includes all drawings and Installation/operation manuals. Many of our systems are also supplied abroad thru OEM's and fitted with electrical instruments of relevant rating specific to country of use.

We offer an effective and easy to handle chlorination system at economical price. Chlorine meets with the demands of a reliable disinfectant and is most trusted in water treatment. In effectively kills pathogenic micro organisms and also provides residual protection to prevent recontamination.
Our system is easy to handle and install. It includes a dosing tank of suitable capacity for storing chlorine base solution and a dosing pump mounted on the tank with all the accessories for accurate dosing of chlorine. The discharge from dosing pump can be accurately varied to add different quantities of chlorine as per the requirements. The system can be offered with Water meters that will send flow proportionate signal to dosing pump for flow proportionate dosing in case of varying water flow areas. This system is most economical and ideal as it ensures availability of pure water at all points in the area. We also offer Chlorination systems for high capacity requirements with Skids, Tanks, Motorised Stirrers and control panels.
Fully automated systems for Chlorination or De-Chlorination with On-line Total Chlorine sensors, Free Chlorine Sensors, Residual Chlorine sensors, Controllers and Automated panels to ensure desired ppm level for Pharma, Biotech, Food and Beverages industries are also undertaken by us.

Industrial Stirrers (also known as Agitators / Mixers) are regularly provided by us as individual items Or as a part of engineering systems. We have been successfully manufacturing high / medium / slow Speed agitators for varied applications and for different chemicals. The contact parts can be supplied with SS 316, SS 304, MS, Rubber lined, PVC lined, FRP Lined, Teflon Coated to suit different chemicals. Models are also available in Flame proof and multi speed versions. They are manufactured with premium quality raw material and have the advantage of easy installation. Shaft wobbling factor or disorientation, which is a constant problem area in Top entry Vertical shaft agitator is taken care by suitable design . From the basic compact Direct Driven Agitators with Motor directly coupled to Geared Motor driven agitators are available to suit any RPM/Speed requirement. In addition to regularly used Propeller turbine type impellors , other different types such as Paddle, Anchor, Pitch Blade, Screened Vane , Saw tooth, Multi pitch type impellors are also available for different applications. Motors of client preferred make and mountings based on different application conditions are also considered during manufacturing of the Agitators. As a renowned firm, we provide a superior quality range of stirrers that is essential for process industry. Our agitator consists of two parts which is drive and impeller. These are manufactured with premium quality raw material and have the advantages of wear and tear resistance and easy installation. Our agitators require high precision and give a flawless performance.

• Orientation Top Entry, Bottom entry, Angular entry
• Speed variable / fixed / self adjustable (PLC based)
• Mounting fixed, movable
• Type of impeller Turbine, W shape, V Shape, Butterfly
• Blade Single Blade, multi blade

We offer reliable and economic solution for Automation Control and Instrumentation of Engineering Systems and process control.
Automated Control panels, LT panels, PCC , MCC , Capacitor Panels with complete engineering , Bus bar etc as per application requirement are provided by us. Various panel designs such as Desk Panels, Double door Acrylic Panels, Double door Metal Panels, IP 65 panels, Close cabinet panels in MS PC or in SS body are also provided by us.

• Cables from Finolex, Havells etc
• Hardware from Schneider, Siemens, L&T, Salzer, Teknic, Phoenix etc
• Panels from Rittal, BCH etc
• AC Speed drives from Danfoss, Siemens, ABB etc
• Touch screen Display unit from RENU etc
• PLC from GE Fanuc, Siemens, OMRON etc
• For MS Powder Coated Panels as well as SS body panels materials from TATA Steel, JSL, Hindalco etc.

These pumps are solenoid driven and controlled electronically by a PCB. The only moving part is solenoid armature which in turn moves the diaphragm. These pumps are highly versatile, maintenance free and achieves very fine control of flow. The solid PTFE diaphragm construction makes it very strong & durable.
These solenoid driven Diaphragm pumps are best suited for metering applications of up to 55 LPH. The pumps are suitable for a electrical supply of 230 Volt, Single Phase, 50 Hz.
Pumps are routinely available with Liquid End of different MOC's such as PVC, PP, Teflon and SS . Other different MOC's are also available for special applications.
The pump is fitted with Suction NRV and Discharge NRV. LED mounted on front panel gives visual running status of Pump. It is supplied with standard Accessories of Foot Valve with Strainer and Discharge (Anti Syphon - Injection ) NRV and 3 Mtr of suitable Tubings.
Other accessories Like Pressure Release Valve, Pulsation Dampner, Agitators (Stirrers), Dosing Tanks , Level Switches , Flow Meters , Level Indicators, Strainers , Pressure Gauges , Calibration Columns, Automated Control panels are also supplied as per client specifications. Complete customized Skid mounted Dosing system with Control panels and Piping can also be offered to suit any application.

These pumps are Motor driven . Flow is controlled thru knob controllers fitted on the pump or thru AC Speed Drives when ever automatic control is needed. These pumps work on worm gear reduction and diaphragm movement principle. These pumps can also be offered with single or multiple Liquid ends. The diaphragms are made of high quality EPDM with moulded in steel core and liquid contact surface is always of Teflon material, which makes it very strong and durable These motor driven Diaphragm pumps are best suited for metering applications of up to 3000 LPH. The pumps are supplied with Motor suitable for a electrical supply of 3 phase, 415 Volt, 50 Hz. However motor suiting for any other specific electrical rating such as 380 Volt 3 Phase , 230 Volt Single Phase, 60 Hz etc can also be fitted.
Pumps are routinely available with Liquid End of different MOC's such as PVC, PP, Teflon and SS . Other different MOC's are also available for special applications.
The pump is supplied with Suction NRV and Discharge NRV fitted on Liquid end.
Other accessories Like Foot Valve, Dosing (Injection - Anti Syphon Valve) , Tubings/Hoses, Pressure Release Valve, Pulsation Dampner, Agitators (Stirrers), Dosing Tanks , Level Switches , Flow Meters , Level Indicators, Strainers , Pressure Gauges , Calibration Columns, Automated Control panels are also supplied as per client specifications. Complete customized Skid mounted Dosing system with Control panels and Piping can also be offered to suit any application.

We offer a wide range of Skid Mounted Chemical Dosing Systems with controls and instrumentation which are customized as per application requirements. We offer from the basic economical dosing systems with simple features to fully automated systems with DCS / SCADA panel etc.
The MOC of tanks can be of SS 304 / SS 316 / HDPE / MS / FRP / PP etc based on requirement. The piping also can be of SS / GI / UPVC / CPVC etc based on specifications. Depending upon application requirement and client specifications, the metering system may consist of following :

All equipments are customized to be economical and suit individual application requirements. These systems offers robust construction , smooth operation, User friendly features with complete automation and easy Assembly at site.
Owing to the customized in-house design and manufacturing technique, our clients always remain in gains for the competitive prices that we maintain.

Our polyelectrolyte systems known as "POLYMAT" are specially designed for automatic preparation of polymer solutions either from powder polymers or liquid polymer concentrate as per required gpl or % concentration. The central function, which is to dissolve powder polymers in proportionate to process requirement, makes the plant ideally suited to a variety of technical processing applications, e.g. in Paper Industry, Beverages, Textiles, Cement, Food processing , Water treatment industry etc. It may be used for nearly all available commercial powder polymers and liquid concentrates. Controlled by the in built Process Controller Program, concentrations may be preprogrammed within a range of 0.01% to 2.0% (0.1 gpl to 20 gpl). Different versions of POLYMAT units are available which can be used with either Powder Polymer or Liquid Polymers or Both. Please refer followed "POLYMAT" System Selection Chart for finalizing between different Capacity / MOC/Configuration.

The MOC of tanks can be of SS 304 / SS 316 / HDPE / MS / FRP / PP etc based on client requirement. Depending upon application requirement and client specifications, the Polymat system may consist of following :

All equipments are customized to be economical and suit individual application requirements. These systems offers robust construction , smooth operation, User friendly features with complete automation and easy Assembly at site. Owing to the customized in-house design and manufacturing technique, our clients always remain in gains for the competitive prices that we maintain.

Superior and consistent Polymer Solution Quality, Prevention of unwanted gelatinous lump formation (commonly known as "Fish eye"), More Economic Use of Polymer, Minimum Operator Involvement, Immediate Installation and Commissioning,