Our Products
Aditya make Wall or Column mounted Jib Cranes are best suited for work station application. These cranes are mounted or building column made from steel. Special design is also available for mounted the Jib crane on RCC columns. Available in capacity ranging from 0.5 MT to 10 MT and outreach of 10 meters, these cranes serve the need of local station without use of shop EOT Crane.
The Jib is made from rolled beams. In over braced construction, tie members are provided to achieve optimum weight of the jib. For smaller capacities are outreach, the jib is also available in under braced construction. Articulated Jib arm is also available to meet special needs of workshop. The slewing motion is available in both manual as well as motorised variety.
Hoisting unit is available in three varieties manual chain hoist with push pulled or geared trolley, electrical chain hoist with push pull/ geared or motorised trolley movement and electric wire rope hoist with motorised CT movement. VVVF drive is available for hoisting, CT and Slewing motion for smooth start and stop and Radio remote control are available for remote operation of the crane.
Aditya make Under Slung Cranes are modular in using standard wire rope hoist or electric chain hoist.
The Under slung single girder crane is very similar to overhead travelling crane except for the fact that the end carriages are hung below the gantry girders made of I section.
The Cranes end carriages are hung below the shop I Beam. The Long travel wheels move on the beam flanges and the beam girder is supported below the end carriages.
Double girder cranes are rugged in construction and find their use in a wide range of hoisting capacities and applications. The promoters of Aditya Cranes have experience of designing cranes up to 500 MT capacity.
Double girder EOT crane find their application in power plant, workshop duty, transformer industry, cable industry, process plants, steel plants, coal fields, cement plants, engineering industry to just name a few.
Heavy duty barrel winch type of double girder cranes are designed and manufactured to customers precise needs.
Special Features of Barrel Winch Cranes :
Capacity up to 250 MTBarrel Winch construction with True Vertical LiftRobust construction suitable for heavy duty applicationAlloy Steel, hardened, precision cut gearsFoot mounted type fabricated gearbox casing horizontally split at centre line for ease of maintenance for hoistFoot mounted hydraulic thrustor brakes for hoistLift and speeds to suit your specific applicationAmple space on trolley for ease of maintenanceL Type housing for Long travel wheelsFull length (along the crane span) platform on the Long travel drive side girderAll motors are TEFC with class F insulationVVVF drives are available as an optionOption for Pendent, Radio Remote and Cabin Operation
The goliath crane move on rails supported on floor level instead of rails placed at elevated level as in case of EOT Cranes. This eliminates the need for workshop building and hence reduction in capital cost. Goliath crane find major application in outdoors. However, the goliath cranes can also be installed inside a closed building.
Special protection is provided for outdoor duty cranes depending on application and agreement with buyer. These special features may include corrosion allowance in design of main load bearing structural members, drilled holes on walkway to avoid accumulation of rain water, localized full cover for trolley, covers for Long travel motor/ brake, additional parking brake for Long travel motion, special paint etc
Lightweight portable gantries are available to meet needs of warehouse and small workshops. These cranes can be easily dismantled and transported to another location in a truck.
The portable gantry crane is provided with solid rubber or rubber tyred caster wheels that move on warehouse floor. The gantry can be easily pushed manually at desired location. The portable gantry crane is available in capacities ranging from 125 kgs to 2, 000 kgs with a span up to 5 meters. These cranes are best suitable for light duty application and are much more economical than permanent shop cranes.
Aditya make Pillar mounted (Free Standing) Jib Cranes are best suited for work station application. These cranes are directly installed on shop floor without any need for support from building column. Available in capacity ranging from 0.5 MT to 5 MT and outreach of 8 meters, these cranes serve the need of local station without use of shop EOT Crane.
The post is made from pipe of ample strength. The jib swivels on antifriction bearings. The slewing motion is available in both manual as well as motorised variety. The jib construction is available in under braced as well as over braced options.
Wide base plate is provided at the bottom of the jib to distribute loads on foundation evenly. Hoisting unit is available in three varieties – manual chain hoist with push pull or geared trolley, electrical chain hoist with push pull / geared or motorised trolley movement and electric wire rope hoist with motorised CT movement. VVVF drive is available for hoisting, CT and Slewing motion for smooth start and stop and Radio remote control are available for remote operation of the crane.
Aditya make Single Girder cranes are modular in construction using standard wire rope hoist. Compact and light weight design ensures lower building space, most optimum utilization of floor space and lower building loads.
Special Features of modular cranes :
Light Weight and compact construction minimizing building loads and space savingSuitable for Light and Medium duty workshop applicationsAll motors are TEFC with class F insulationHeavy duty cast steel rope guideUpper and Lower hook travel limit switchAdditional Counter weight operated over hoist limit switch as optionVVVF drives are available as an optionCompact and lightweight festoon cable systemPendent and Radio remote control operation