Adithya Mechatroniks

Kalapatti, Coimbatore, Tamil Nadu

Whenever Power needs to be controlled, monitored, distributed etc in outdoor applications like in a transformer yard Commercial Buildings or in group housing projects spread out over a large space and so on, Feeder Pillar Panels or outdoor Kiosks are used. These can be supplied in powder coated CRCA Sheet Steel or in Stainless Steel as required. The Panels are manufactured generally to IP55 clause of protection to ensure no ingress of water, dust or vermin with a canopy on top.

Power distributed throughout a commercial or industrial application is used for a variety of applications such as heating, cooling, lighting, and motor-driven machinery in many commercial and industrial applications, a few electric motors are required, and it is often desirable to control some or all of the motors from a central location. The apparatus designed for this function is the motor control center (MCC). The complete modularity of this system allows maximum freedom when designing Motor Control Centres. The physical dimensions of each compartment can be varied in width, height and depth to accommodate the various space requirements for Different starter types, viz., Direct on Line, Star Delta, Soft Start, Auto transformer Starters, Variable Frequency Drives (VFD Panels (or) AC Drive Panel), etc.

We offer DG Synchronizing Panels which are based on Auto / Manual sharing, Auto Synchronising, Auto KW & KVAR sharing and Load dependent start / stop features. Changing of schemes are made through PLC & software which work in tandem with the Generator Control Package Relay that also takes care of power monitoring, Communication, display as well as protection.

For any type of load addition or reduction, manual intervention with respect to DG Set operation is not required. However, in case of emergency, manual operation impossible.

Load dependent stop and stop facility can also be incorporated in the logic in order to further save fuel costs and wear & tear of the DG sets. Unequal sizes of DG sets can also be synchronised with special relays and PLC logic. Multiple DG sets can be Synchronisation is possible.

We manufacture and supply of Automatic Mains Failure Panels as per consumers requirements.

• Generator starting, stopping Automatically.
• EB & DG Automatically Source Change Over.
• Continuous monitoring of three phase voltage current / Frequency and Battery Volta

We offer to our clients a range of intelligent, flexible, powerful, expandable and effectively programmable logic relays with expandable inputs and outputs. These programmable logic relays have the capability of analog inputs, high speed counters and communication options.

Our range of EMS/ SCADA systems are user friendly, robust and comprehensive in the display of Power parameters, graphs, single line diagrams, history, trends, data, help menu for the Control Panel operation, and remote start stop facility as called for by the application. We can provide

A soft starter has different characteristics to the other starting methods. It has thyristors in the main circuit, and the voltage is regulated with electronic circuits. The soft starter makes use of the fact that when the motor voltage is low during start, the starting current and starting torque also low. During the starting time the motor will accelerate slowly to increase the speed and achieve the specified speed with fixed time frame. Eliminating unnecessary jerks during the start the motor.

For high rise Apartments, complexes and commercial establishments, individual metering provision for each LT supply. These Panels are generally approved by the Electricity Authorities and involve sealing of compartments in such a manner we made the metering Panel. The current limiting devices are used to each LT supply, ensure that the Main Transformer is not overloaded and individual raising main cables are also protected. Wherever, DG Power is to be supplied to the Apartment or Commercial establishment during times of EB Power failure, an Automatic Changeover cum Current Limiter is used. This not only automatically changes over the Power from EB to DG and back, but also limits the use of the DG power to a pre-set limit so as not to overload the DG set.

The bus bar system forms the main power distribution within an assembly and is one of the critical elements determining the assemblys operational reliability and safety. The bus bar system is designed to withstand the mechanical and thermal stress existing during normal service as well as under fault conditions. The main bus bar can be arranged at the top, bottom or at any module in between in the enclosure.

The bus bar support insulators are used a high grade SMC/DMC/FRP which can withstand all the mechanical and thermal stresses involved. All systems up to 8800 A can be assembled as standard. Multiple Bus bar per phase arrangement is used. This allows connections and extensions to be made with either Copper or Aluminium bus bars. For higher ratings interleaved bus bar arrangements are also offered for lesser temperature rise and efficiency in conducting current.

• Toroidal CRGO core CT in ABS / polycarbonate shell design
• Design according to IEC, IS Standards
• Busbar fastening clamps are intergraded
• The secondary terminal can be sealed and are accessible from two sides
• Fastening foot is available as accessory

To make possible the most complicated fabrication requirements, we have in-house the following machines and connected power of more than 50 HP.

• Cable Trays (GI, Hot Tip)
  • Lader Type, Perforated
• Trolley
• Stainless Steel Fabrication (SS 202, 304, 316 ect)
• Working Table
• Gratings
• Street Light Poles
• Plat forms
• Structural Fabrication