Post Buy Requirement
AT

Adhiam Thermal Systems & Solutions Pvt Ltd

Add Review

Our Products

  1. Heat Exchangers

    2 Products available
  2. Gaskets

    2 Products available
  3. Domestic Fans, AC & Coolers

    1 Products available
  4. Spanners

    1 Products available
  5. Industrial Pump

    1 Products available
  6. Others Products 1 Products available

Our Products

Our product range contains a wide range of Hydraulic Tightening device

Brazed Plate Heat Exchangers

Brazed plate Heat Exchanger is constructed of a series of Pressed corrugated plates in stainless steel. These plates are stacked one over other with copper foil in between for Joining and kept in oven for brazing together. The plates are stacked in such a way that flow passage one side primary fluid and another channel secondary fluid passage. Features: Small Footprint Lower Hold-up Volume No Gaskets to Replace High and Low Temperaturesv BPHE plates and channel types Certain BPHEs are available with different types of channel plates where the herringbone pattern varies. The benefit of different herringbone patterns is that the hydraulic and thermal characteristics of the BPHE can be modified. For example, two BPHEs can have the same pressure drop on both sides despite different flow rates. The fluids can pass through the heat exchanger in different ways. For parallel flow BPHEs, there are two different flow configurations: co-current or counter-current There are several different versions of the channel plate packages. Examples include: Dual-circuit BPHEDual-circuit BPHE Two-pass BPHE, which corresponds to two units connected in series. Dual-over-two-pass BPHE Material combinations There are different BPHE product categories depending on material combinations and design pressures. The standard plate materials are AISI 316 stainless steel, S, vacuum-brazed with a pure copper filler, C, or a nickel-based filler, N. For demanding applications, the plates can be made of SMO 254, a stainless steel with a higher content of molybdenum.

View Complete Details

Plate Heat Exchangers Gasket

Plate heat exchangers gasket is one of the crucial part for the operation and it needs to consider the elastomeric properties in line with the application. An elastomer is composed of a large number of products: polymer, fillers, plasticizers, activator, accelerator, antioxidant The formulation of an elastomer can be optimally improved to achieve desired physical traits including hardness, compression set, heat resistance and chemical properties. These parameters must be considered to choose the must appropriate elastomers for a particular gasket application. When an elastomer gasket is not used in the proper temperature range, its life can be shortened and leakage can occur. Heat plate exchanger gaskets must be designed with consideration of the following physical properties: Compression set: Hardness Tear strength: Tensile strength and elongation at break: Gasket MOC : NBR, NBR-HT, EPDM, EPDM-HT, Viton A, Viton G etc Make : Almost all makes , we can support. Some of the regular makes are

View Complete Details

Gaskets

Plate heat exchanger consists of corrugated plates fixed with gasket and these are mounted between fixed frame and movable frame , Top and Bottom carrying bar are used for hanging the plates in between frames and the ties rods are used for tightening to the required plate pack. Fluids enter through the connections in the frame and are distributed in between plates. The fluids flow thorough alternate passages between plates by means of gasket arrangement. More than 50 sizes available with every size two to three plate pattern More than 50 sizes available with every size two to three plate pattern Connection size available from 25 mm to 500 mm Design Pressure up to 25 bar Plate MOC: AISI304, AISI316, SMO254, Hastelloy C 276 , Titanium , TI-Pd, Nickel etc Gasket MOC : NBR, NBR Peroxide cured, HNBR, EPDM, EPDM -P, Viton A , Viton G etc

View Complete Details

Ratchet Spanner

This ratchet type spanner is specifically used for opening and closing the plate heat exchanger frames . Sizes available 24, 36, 46, 50 , 55, 60, 70, 75mm and can be tailor made to meet client requirements. Smoother operation Non slip while operation.

View Complete Details

Cip Pump

Maintenance personnels frequently encounter the problem of build-up deposits on heat transfer surfaces in many applications . We do supply the complete CIP pump system as per the requirement of our customer. The CIP pump can be used for cleaning the equipments without opening the Unit. This can be used for plate heat exchanger, spiral heat exchanger , other welded heat exchanger and shell and tube heat exchangers. Concept : Connect the CIP unit to the heat exchanger Mix the cleaning chemicals in the tank and heat it up. Circulate the cleaning solution for few hours depends on the scale. Drain and rinse thoroughly with water Disconnect the CIP unit All scales shall be removed and the equipment is back to the designed performance. Principle: Complete or partial dissolving or destruction of the deposits due to the chemical reaction. Deposits are removed in the continuous re circulation. Features and Benefits: Connecting directly to the inlet and outlet. This avoids disassembly and assembly .Down time minimized and increases the gasket life in case of gasketted phe. Construction of Pump and tank and all other wetted parts are in AISI304 or as per the preference of customer . Fast cleaning due to the hot liquid . Heating element helps to heat the chemical in the tank. Temperature Indicator to check and plan the required temperature . Reverse direction circulation makes it possible to remove any deposits which is difficult to remove from the heat exchanger.

View Complete Details

Hydraulic Tightening Device

Capacity 13 - 95 ton Stroke 8 - 155 mm Center Hole Diameter 19, 6 - 79, 0 mm Max. Pressure 700 bar Easy to dismantle and Assemble plate pack of plate heat exchangers Less time duration to complete the assembly No possibility of misalignment of plates while assembly The tightening device shall consist of the following components : 60 Ton S/A Hollow Plunger Cylinder, Stroke: 76mm, Closed Height: 247mm Economy Pump, 3-Way Valve, Single Acting Max. operating pressure 700 bar Gauge Adaptor, 1/4" Gauge Port Pressure Gauge, Face Dia 2.5", 1/4" NPTF Thread, Range 0-10000 PSI 3/8" Hi-Flow Coupler consisting of CR400 female half & CH-604 male half 6 feet Hose, 3/8" NPTF, .25" I.D. with CH-604 Coupler 3/8" NPTF Manifold Valve, 4-Way Cylinder Half (Female) Coupler of C604 20 feet Hose, with CH-604, 3/8" NPTF, .25" I.D.

View Complete Details

Ac Equipments

coil type prime surface heat exchangers finds various applications due to its versatile design. This can be tailor made to the needs of customer and their applications.

View Complete Details

Spiral Heat Exchanger

are you looking for plate heat exchangers adhiam thermal is the leading manufacturer of spiral plate heat exchangers in singapore, spiral plate heat exchangers in bangladesh, spiral plate heat exchangers in nigeria, spiral heat exchangers in qatar, spiral heat exchangers in singapore,

.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us