BOD Incubatoris designed for low temperature incubation and determination of Bio Chemical Oxygen Demand (B.O.D). The BOD Incubator comes with a double wall construction. The Inner chamber is made of richly anodized aluminum or highly polished stainless steel with with two / three removable perforated shelves. The exterior chamber of the BOD Incubator is made of thick mild steel sheet duly finished in enamel paint. Outer double wall door is provided with magnetic gasket and lock & key arrangement. The inner door is made out of clear acrylic sheet allowing inspection of material in the chamber without disturbing the chamber temperature. Door operated inner illumination has been provided. The gap between walls of equipment are filled with glass wool for temperature insulation. The cabinet is mounted on castors. The temperature in the BOD Incubator is controlled by a sensitive thermostat from 5oC to 50oC 1oC. For lower temperature working, a standard cooling unit with sealed compressor with protective devices has been provided below the chamber for safe and efficient working. Heating arrangement has made within the chamber for higher temperature. Inner air circulating system is provided to achieve uniform temperature in the whole chamber. A control panel is provided with various indicators such as on off switch, L - shaped thermometer, etc. The BOD Incubator is supplied with cord & plug, etc.
SS Chamber Sizes:

• 24" x 18" x 6" - 4 cubic ft.
• 33" x 20" x 16.5" - 6 cubic ft.
• 34.5" x 22.5" x 22.5" -10 cubic ft.
• 36" x 26" x 23" - 12 cubic ft.
• 27.5" x 25.5" x 35.5" -15 cubic ft.

Optional Accessories:

• Timer 0.24 hours day night cycle.
• Co2/air mixer nozzle is provided.
• Internal illumination with 3 fluorescent tubes.
• Digital temp. Indicator-cum-Controller.
• Micropcessor PID digital temp. Indicator-cum-controller.

• The syringe hub and Needle can be cut off easily by a sharp Copper blade by pulling the handle.
• Provision of on/off switch with pilot lamp, Shock proof-main circuit breaker is provided. Portable, compact, handy. Low Power Consumption.
• Destroys syringe hub and needle in single action disposable puncture

ROTA ROD is the instrument meant for studying the effect of on the muscle grip strength of mice.

A versatile built with LSI chips is equipped with Four/ Two/Three compartments and Four/Two/Three independent 4 digits. Digital milliseconds timer for measuring the fall-off time of the mice.

It is also equipped with a motor coupled with rotating rod whose speed can be varied with the help of the front panel knob marked with an arrow or speed less than 10 RPM.

One of the important pharmacological actions of antianxiety of agents of class of drugs is muscle relaxing property. The skeletal muscle relaxation together with taming or calming effect these agents reduce anxiety and tension. The loss of muscle-grip is an indication of muscle relaxation, this can be easily checked in animals, using ROTAROD.

The difference in the fall of time from the rotating rod between the control and treated animals is taken an index of muscle relaxation. The rate of rotation of the rod should be adjusted such that normal mouse can stay on the rod for an appropriate period of time.

This is an all-Solid-State instrument for monitoring spontaneous & induced Ambulatory activity of laboratory animals. Provided in a powder coated sturdy body with Bakelite meters & superior quality design.

• Optimum quality, Manually operated & this hub cutter is used to cut the syringe needle and their hub.
• Easy to use, Safe, Hygienic & Durable & No Maintenance cost. Pyrogen Free Non - Toxic Material ensures safety for the user.

Suppository MouldMade from brass/gun metal machine made perfect shapes smooth and polished cavities. Nickel plated various capacities with a number of moulds in each set.

Bulk Density Apparatus is used to study the packing down of powder beds of differentpharmaceuticalandchemicalpowders, flakes, pellets, granules and other bulksubstances.

Bulk Density is an essential test required in the process of tablet, capsule filling and cosmetic manufacturing.
Bulk density considers both the solids and the pore space, whereas, particle density considers only the mineral solids.

we are able to supply a wide assortment of Tincture Press. We always follow quality standards at the time of supply thus resulting enhanced life, less maintenance costs and easy handling. Clients can avail this product in both standard and customized specifications at market leading prices.

Additional heavy duty for making tinctures.

Decoctions infusion etc. cap

Disc made up of pure stainless steel.

Drive for fixing screws.

Mesh made from stainless steel in the form of an inner drilled container with stop cock.

Detachable polishing pan for use with coating pan. Made of mild steel, painted & provided with inner lining of superior canvas cloth. Inner diameter 12" x 8" high with opening of 7" dia neck.

This programmable advanced instrument is equipped with microprocessor-based circuitry, to program the friability test. The unit is equipped with informative two lines LCD display screen. It is also equipped with digital readout, automatic pre-set count stop, and audio signal. It is supplied with two acrylic drums. The apparatus will have 10-degree tilt facility, as required.

Made of stainless steel with the inner chamber of a thick pressure gauge. The outer surface has a mirror polish. The lid of this autoclave is thick along with a safety valve, pressure release valve, and drain valve. Spring loaded valve to adjust the pressure.

Specifications:

The Heavy-duty tablet compression machine is a high-speed mechanical device. It compasses the ingredients into the required tablets shapes like Round Square Rectangular, Oval, Hexagonal, Capsule Shape or any other Shapes. Tablet Making Machines are useful for Pharmaceutical Industries, Chemical Industries, Food Industries, Feed stuff Industries etc. Features: Pressure on the tablets is controlled by adjusting a lever Powder filled in cavity is managed automatically by a moving feeder Provided with motor, hopper, feeder and tablets slider Supplied without dies/punches.

Features:

• Abundant Output: The still provides 4 ltr/hr of distilled water which is deal for General Laboratory use and is capable for producing pyrogen free distillate.
• Distillate temperature is approx. between which is ensured  by highly efficient condenser.

Distillate Quality:

• Conductivity: 3.0-4.0 uS / cm
• Distillate Quality: Pyrogen Free

Construction:

• The stand is powder coated for long and rust free operation.
• The boiler and condenser are designed for high efficiency.
• Boiler is provided with PTFE Cock for easy draining and cleaning of boiling chamber.
• Screw Threaded Connectors are provided for easy plumbing & Installation to avoid any glassware breakage during assembly.

Product Details:

• Gel Electrophoresis System Vertical Mini with glass plates, combs. Leak proof.
• Moulded in single piece made of polycarbonate. 99.9% pure platinum wire is used in electrode.

Measuring Range - 20-2, 000, 000 mpaSpeed - 8 speed settingDisplay LCDVoltage 40 vResolution 0.01 mpa (Full Scale)

SS Humidifierbased on the rotating disc-splash plate principal. It produces only super fine particles of micron size, which are part of the atmosphere, thereby reaching every corner of the room, causing and resulting in uniform humidity in the room.Due to the upward thrust imparted to the micron sized water droplets, by high speed motorized unit, they remain suspended in the atmosphere for longer duration of time.The unit is capable of atomizing of water in an hour at full evaporation in the driest possible ambient conditions.The unit has body made up of S.S. A single unit is effective for an enclosed space of volume up to 40 cubic meters.The unit is provided with high speed 2800 RPM motor to run longer period, and the blades are aerodynamically balanced to ensure drop less fumigation.

Features:

• Digital timer with 1 second resolution
• Accurate time out provided by microprocessor based time totalizer
• Baskets move Up & Down as per IP/USP test specifications
• Temperature Controlled by sensitive thermostats
• Digital Tablet Disintegration Apparatus is designed for accurate estimation of disintegration time of tablets as per IP/USP standards.
• The instrument is designed to test to batches of six tablets, simultaneously.
• The unit consists of two beakers having capacity of 1000 cc each.
• In these beakers, suitable disintegration media can be taken.
• These can be temperature controlled using a in-built heater and a highly thermostat fitted inside the instrument.
• Microprocessor based time to talizer is provided for accurate time readout.

Single punch automatic compression and injection device with each revolution of the wheel drive automatic feed and remove of tablets. Built on heavy cast body with centric pressure system steeliness steel hoper provided and connected by a robber tube easy setting for thickness and hardness of tablets with nuts and locknuts. Set of two spanners provided necessary tool die Heavy duty electric model is also available.

Product Details:

• Counting plate with illuminated standard wolf hugel ruling ensures clearly differentiated and sharply defined colonies.
• Each touch of making pencil in the Petri dish increment the colony count by '1' and the glowing LED Display depicts the total colony count.
• Provided with a manual reset of digital display, ON/OFF Switch, counting plate, cord and plug.

A versatile lever operated semi automatic machine for various operations.

OTHER DETAILS

• We offer 300 holes manual capsule filling machine in complete stainless steel material.
• In this manual capsule filling machine model, the empty capsules are to be loaded manually in the filling tray and all other processes are also to be done manually.
• There are different capsule size ranging from 00, 0, 1, 2, 3, 4, 5 for which this machine is suitable.
• Capsule Size 00, 0, 1, 2 can be done on the same machine with the help of change parts.
• Capsule size 3 and 4 can be done on the same machine with the help of change parts.
• For capsule size 5, a separate machine is prepared.
• The machine is provided with highly finished stainless steel surface and also all parts of the machine are stainless steel constructed.
• We provide the premium quality mirror finish and very precise locking of the capsules in our manual capsule filling machine.
• Our manual capsule filling machines are worldwide accepted with ample of clients operating the machines worldwide.
• The machine is designed and constructed by qualified engineers with good quality material and products which give best quality output and least breakdowns.

Features:

• 1 no top section plate provided.
• 3 no's. capsule loading tray provided.
• 1 no. powder filling tray provided
• 1 no. Nylon Brush provided.
• 1 no. Teflon Scrapper provided.
• The Machine is rested on 4 no's legs.

Specifications:

• Switches: Processor based switches for blower, LED light & UV light With LCD back light display. (UV light with Timer)
• Pre-filter: 99.00% down to 5 micron.
• HEPA Filter: ISO 14644 Class 5 (Class100) 99.97%-99.99% down to 0.3 micron. Mesh guard for protection of HEPA filter.
• Airflow : Frontward Horizontally
• Work Table : Made up of stainless steel 304gr. Cock for gas on work table.
• Side Panels : 6mm+-.5mm thick acrylic sheet.
• Front door : Made of acrylic.
• UV Lamp : 15/30W, make Philips Holland,
• Illumination : LED White Light.
• Pressure : Digital Manometer 0-50mm range with filter failure alarm.

Available Size:

• Working Area Size 60x60x60cm.
• Working Area Size 90x60x60cm.
• Working Area Size 120x60x60cm.
• Working Area Size 180x60x60cm.

The Electrically Opened E-8 recording drum is very suitable for student use and general experimental work. The entire driving mechanism, consisting of constant speed electric motor workable on 220 V AC Hz single phase and gear box contained in the base together with robust plate clutch is a synchronized system. Engagement of the various gear ratios is effected by sliding the lever into the slot marked with the surface speed required. Considered care has taken in selected the gear ratio to provide speed which will be suitable for all student experiments.
Various accessories like Adjustable Stand, Frog Board, Myograph Lever, Muscle Holder, Heart Clip, Starling Heart Lever, Simple Electrode, Tuning Fork, Aerator etc are available to be used along with Kymograph.

We deal in all type of Pharmacy Laboratory Equipment . We are manufacturers for D.Pharmacy and B. Pharmacy Lab Equipment. Pharmacy Equipment, Pharmacy Lab Equipment, Pharmacy Lab Instruments , Pharmacy College Lab Equipment , Pharmacy college laboratory Equipment, B.Pharma Equipment , D.Pharma Equipment , Pharmaceutical Lab Equipment , M.Pharma Lab Equipment

Technical Specifications:

• Out Side Body: Powder coated with stove enamel paint. (SS body also available)
• Adjustable Perforated Selves.
• Body Structure: Double Walled structure filled with glass wool insulation
• Heater Quality: High Quality Chrome Heater insulated with ceramic beads
• Air Circulation: By Air Circulating Fan to ensure even temperature distribution.
• Ventilation: Ventilation port with adjustable Opening.
• Temperature Control: By Digital Temperature indicator and Controller
• Uses:
• For drying and curing of samples at particular temperature and duration
• To determine the effect of ageing on various physical properties of any type of material like fabric, yarn, paper, rubber, plastic, Powder and metals

Sizes available are:

• 12" x 12" x 12" (28 Ltr)
• 14" x 14" x 14" (45 Ltr)
• 18" x 18" x 18" (95 Ltr)
• 24" x 24" x 24" (224 Ltr.)

6-liter capacity with chain compensated counter balance to the float balanced through cut its movement. Pulley calibrated to denote volume. Inlet and outlet tubes, strong construction. Complete with corrugated tube mouth piece & recording lever.

Laboratory StirrerFitted with speed regulator, height and space adjustable.Laboratory stirrer with regulator 4000rpm mechanical stirrer overhead stirrer, product description, laboratory stirrer:-, designed for homogenization, emulsification and dispersion and mixing of fluids at high speed, ac universal motor with step less speed regulations for continuous variation of speed as per requirements, reliable performance even in continuous use, technical data, speed range, 0 4000 rpm

A handy, tough and direct dial reading type tablet hardness tester, working as pair of plairs, generates breaking force in single grip. The instrument offers accurate and reproducible results much faster other conventional hardness testers.

Specifications:

• Shaking Method: Up And Down
• Sieve Shaker for Civil Engineering

Dissolution Test Apparatusto carry out simultaneously six tests of dissolution rate of tablets and capsules as per USP standard. These tests are carried out by quality control and R & D Departments in pharmaceutical industry. It consists of constant temperature water bath made of transparent acrylic . Temp. is controlled by fully solid state controller.

Specifications:

• Timer: Microprocessor based preset timer 00:01 to 99:59 Hrs with alarm.
• Bath: Made up of 10mm thick clear acrylic 300mm W X 200mm D X 200mm H
• Heater: 350 watt stainless steel.
• Temperature Controller: Digital Microprocessor Based.

The unit has spring loaded safety valve for pressure adjustment and a dead weight safety valve.Portable Autoclaveis constructed of deep drawn aluminum sheet. To give the aesthetic look the outer is painted with powder coated paint. Provided with double safety valves, pressure gauge and pressure release valve.

BOD Incubatoris designed for low temperature incubation and determination of Bio Chemical Oxygen Demand (B.O.D). The BOD Incubator comes with a double wall construction. The Inner chamber is made of richly anodized aluminum or highly polished stainless steel with with two / three removable perforated shelves. The exterior chamber of the BOD Incubator is made of thick mild steel sheet duly finished in enamel paint. Outer double wall door is provided with magnetic gasket and lock & key arrangement. The inner door is made out of clear acrylic sheet allowing inspection of material in the chamber without disturbing the chamber temperature. Door operated inner illumination has been provided. The gap between walls of equipment are filled with glass wool for temperature insulation. The cabinet is mounted on castors. The temperature in the BOD Incubator is controlled by a sensitive thermostat from 5oC to 50oC 1oC. For lower temperature working, a standard cooling unit with sealed compressor with protective devices has been provided below the chamber for safe and efficient working. Heating arrangement has made within the chamber for higher temperature. Inner air circulating system is provided to achieve uniform temperature in the whole chamber. A control panel is provided with various indicators such as on off switch, L - shaped thermometer, etc. The BOD Incubator is supplied with cord & plug, etc.
SS Chamber Sizes:

• 24" x 18" x 6" - 4 cubic ft.
• 33" x 20" x 16.5" - 6 cubic ft.
• 34.5" x 22.5" x 22.5" -10 cubic ft.
• 36" x 26" x 23" - 12 cubic ft.
• 27.5" x 25.5" x 35.5" -15 cubic ft.

Optional Accessories:

• Timer 0.24 hours day night cycle.
• Co2/air mixer nozzle is provided.
• Internal illumination with 3 fluorescent tubes.
• Digital temp. Indicator-cum-Controller.
• Micropcessor PID digital temp. Indicator-cum-controller.

• The syringe hub and Needle can be cut off easily by a sharp Copper blade by pulling the handle.
• Provision of on/off switch with pilot lamp, Shock proof-main circuit breaker is provided. Portable, compact, handy. Low Power Consumption.
• Destroys syringe hub and needle in single action disposable puncture

ROTA ROD is the instrument meant for studying the effect of on the muscle grip strength of mice.

A versatile built with LSI chips is equipped with Four/ Two/Three compartments and Four/Two/Three independent 4 digits. Digital milliseconds timer for measuring the fall-off time of the mice.

It is also equipped with a motor coupled with rotating rod whose speed can be varied with the help of the front panel knob marked with an arrow or speed less than 10 RPM.

One of the important pharmacological actions of antianxiety of agents of class of drugs is muscle relaxing property. The skeletal muscle relaxation together with taming or calming effect these agents reduce anxiety and tension. The loss of muscle-grip is an indication of muscle relaxation, this can be easily checked in animals, using ROTAROD.

The difference in the fall of time from the rotating rod between the control and treated animals is taken an index of muscle relaxation. The rate of rotation of the rod should be adjusted such that normal mouse can stay on the rod for an appropriate period of time.

This is an all-Solid-State instrument for monitoring spontaneous & induced Ambulatory activity of laboratory animals. Provided in a powder coated sturdy body with Bakelite meters & superior quality design.

• Optimum quality, Manually operated & this hub cutter is used to cut the syringe needle and their hub.
• Easy to use, Safe, Hygienic & Durable & No Maintenance cost. Pyrogen Free Non - Toxic Material ensures safety for the user.

Suppository MouldMade from brass/gun metal machine made perfect shapes smooth and polished cavities. Nickel plated various capacities with a number of moulds in each set.

Bulk Density Apparatus is used to study the packing down of powder beds of differentpharmaceuticalandchemicalpowders, flakes, pellets, granules and other bulksubstances.

Bulk Density is an essential test required in the process of tablet, capsule filling and cosmetic manufacturing.
Bulk density considers both the solids and the pore space, whereas, particle density considers only the mineral solids.

we are able to supply a wide assortment of Tincture Press. We always follow quality standards at the time of supply thus resulting enhanced life, less maintenance costs and easy handling. Clients can avail this product in both standard and customized specifications at market leading prices.

Additional heavy duty for making tinctures.

Decoctions infusion etc. cap

Disc made up of pure stainless steel.

Drive for fixing screws.

Mesh made from stainless steel in the form of an inner drilled container with stop cock.

Detachable polishing pan for use with coating pan. Made of mild steel, painted & provided with inner lining of superior canvas cloth. Inner diameter 12" x 8" high with opening of 7" dia neck.

This programmable advanced instrument is equipped with microprocessor-based circuitry, to program the friability test. The unit is equipped with informative two lines LCD display screen. It is also equipped with digital readout, automatic pre-set count stop, and audio signal. It is supplied with two acrylic drums. The apparatus will have 10-degree tilt facility, as required.

Made of stainless steel with the inner chamber of a thick pressure gauge. The outer surface has a mirror polish. The lid of this autoclave is thick along with a safety valve, pressure release valve, and drain valve. Spring loaded valve to adjust the pressure.

Specifications:

The Heavy-duty tablet compression machine is a high-speed mechanical device. It compasses the ingredients into the required tablets shapes like Round Square Rectangular, Oval, Hexagonal, Capsule Shape or any other Shapes. Tablet Making Machines are useful for Pharmaceutical Industries, Chemical Industries, Food Industries, Feed stuff Industries etc. Features: Pressure on the tablets is controlled by adjusting a lever Powder filled in cavity is managed automatically by a moving feeder Provided with motor, hopper, feeder and tablets slider Supplied without dies/punches.

Features:

• Abundant Output: The still provides 4 ltr/hr of distilled water which is deal for General Laboratory use and is capable for producing pyrogen free distillate.
• Distillate temperature is approx. between which is ensured  by highly efficient condenser.

Distillate Quality:

• Conductivity: 3.0-4.0 uS / cm
• Distillate Quality: Pyrogen Free

Construction:

• The stand is powder coated for long and rust free operation.
• The boiler and condenser are designed for high efficiency.
• Boiler is provided with PTFE Cock for easy draining and cleaning of boiling chamber.
• Screw Threaded Connectors are provided for easy plumbing & Installation to avoid any glassware breakage during assembly.

Product Details:

• Gel Electrophoresis System Vertical Mini with glass plates, combs. Leak proof.
• Moulded in single piece made of polycarbonate. 99.9% pure platinum wire is used in electrode.

Measuring Range - 20-2, 000, 000 mpaSpeed - 8 speed settingDisplay LCDVoltage 40 vResolution 0.01 mpa (Full Scale)

SS Humidifierbased on the rotating disc-splash plate principal. It produces only super fine particles of micron size, which are part of the atmosphere, thereby reaching every corner of the room, causing and resulting in uniform humidity in the room.Due to the upward thrust imparted to the micron sized water droplets, by high speed motorized unit, they remain suspended in the atmosphere for longer duration of time.The unit is capable of atomizing of water in an hour at full evaporation in the driest possible ambient conditions.The unit has body made up of S.S. A single unit is effective for an enclosed space of volume up to 40 cubic meters.The unit is provided with high speed 2800 RPM motor to run longer period, and the blades are aerodynamically balanced to ensure drop less fumigation.

Features:

• Digital timer with 1 second resolution
• Accurate time out provided by microprocessor based time totalizer
• Baskets move Up & Down as per IP/USP test specifications
• Temperature Controlled by sensitive thermostats
• Digital Tablet Disintegration Apparatus is designed for accurate estimation of disintegration time of tablets as per IP/USP standards.
• The instrument is designed to test to batches of six tablets, simultaneously.
• The unit consists of two beakers having capacity of 1000 cc each.
• In these beakers, suitable disintegration media can be taken.
• These can be temperature controlled using a in-built heater and a highly thermostat fitted inside the instrument.
• Microprocessor based time to talizer is provided for accurate time readout.

Single punch automatic compression and injection device with each revolution of the wheel drive automatic feed and remove of tablets. Built on heavy cast body with centric pressure system steeliness steel hoper provided and connected by a robber tube easy setting for thickness and hardness of tablets with nuts and locknuts. Set of two spanners provided necessary tool die Heavy duty electric model is also available.

Product Details:

• Counting plate with illuminated standard wolf hugel ruling ensures clearly differentiated and sharply defined colonies.
• Each touch of making pencil in the Petri dish increment the colony count by '1' and the glowing LED Display depicts the total colony count.
• Provided with a manual reset of digital display, ON/OFF Switch, counting plate, cord and plug.

A versatile lever operated semi automatic machine for various operations.

OTHER DETAILS

• We offer 300 holes manual capsule filling machine in complete stainless steel material.
• In this manual capsule filling machine model, the empty capsules are to be loaded manually in the filling tray and all other processes are also to be done manually.
• There are different capsule size ranging from 00, 0, 1, 2, 3, 4, 5 for which this machine is suitable.
• Capsule Size 00, 0, 1, 2 can be done on the same machine with the help of change parts.
• Capsule size 3 and 4 can be done on the same machine with the help of change parts.
• For capsule size 5, a separate machine is prepared.
• The machine is provided with highly finished stainless steel surface and also all parts of the machine are stainless steel constructed.
• We provide the premium quality mirror finish and very precise locking of the capsules in our manual capsule filling machine.
• Our manual capsule filling machines are worldwide accepted with ample of clients operating the machines worldwide.
• The machine is designed and constructed by qualified engineers with good quality material and products which give best quality output and least breakdowns.

Features:

• 1 no top section plate provided.
• 3 no's. capsule loading tray provided.
• 1 no. powder filling tray provided
• 1 no. Nylon Brush provided.
• 1 no. Teflon Scrapper provided.
• The Machine is rested on 4 no's legs.

Specifications:

• Switches: Processor based switches for blower, LED light & UV light With LCD back light display. (UV light with Timer)
• Pre-filter: 99.00% down to 5 micron.
• HEPA Filter: ISO 14644 Class 5 (Class100) 99.97%-99.99% down to 0.3 micron. Mesh guard for protection of HEPA filter.
• Airflow : Frontward Horizontally
• Work Table : Made up of stainless steel 304gr. Cock for gas on work table.
• Side Panels : 6mm+-.5mm thick acrylic sheet.
• Front door : Made of acrylic.
• UV Lamp : 15/30W, make Philips Holland,
• Illumination : LED White Light.
• Pressure : Digital Manometer 0-50mm range with filter failure alarm.

Available Size:

• Working Area Size 60x60x60cm.
• Working Area Size 90x60x60cm.
• Working Area Size 120x60x60cm.
• Working Area Size 180x60x60cm.

The Electrically Opened E-8 recording drum is very suitable for student use and general experimental work. The entire driving mechanism, consisting of constant speed electric motor workable on 220 V AC Hz single phase and gear box contained in the base together with robust plate clutch is a synchronized system. Engagement of the various gear ratios is effected by sliding the lever into the slot marked with the surface speed required. Considered care has taken in selected the gear ratio to provide speed which will be suitable for all student experiments.
Various accessories like Adjustable Stand, Frog Board, Myograph Lever, Muscle Holder, Heart Clip, Starling Heart Lever, Simple Electrode, Tuning Fork, Aerator etc are available to be used along with Kymograph.

We deal in all type of Pharmacy Laboratory Equipment . We are manufacturers for D.Pharmacy and B. Pharmacy Lab Equipment. Pharmacy Equipment, Pharmacy Lab Equipment, Pharmacy Lab Instruments , Pharmacy College Lab Equipment , Pharmacy college laboratory Equipment, B.Pharma Equipment , D.Pharma Equipment , Pharmaceutical Lab Equipment , M.Pharma Lab Equipment

Technical Specifications:

• Out Side Body: Powder coated with stove enamel paint. (SS body also available)
• Adjustable Perforated Selves.
• Body Structure: Double Walled structure filled with glass wool insulation
• Heater Quality: High Quality Chrome Heater insulated with ceramic beads
• Air Circulation: By Air Circulating Fan to ensure even temperature distribution.
• Ventilation: Ventilation port with adjustable Opening.
• Temperature Control: By Digital Temperature indicator and Controller
• Uses:
• For drying and curing of samples at particular temperature and duration
• To determine the effect of ageing on various physical properties of any type of material like fabric, yarn, paper, rubber, plastic, Powder and metals

Sizes available are:

• 12" x 12" x 12" (28 Ltr)
• 14" x 14" x 14" (45 Ltr)
• 18" x 18" x 18" (95 Ltr)
• 24" x 24" x 24" (224 Ltr.)

6-liter capacity with chain compensated counter balance to the float balanced through cut its movement. Pulley calibrated to denote volume. Inlet and outlet tubes, strong construction. Complete with corrugated tube mouth piece & recording lever.

Laboratory StirrerFitted with speed regulator, height and space adjustable.Laboratory stirrer with regulator 4000rpm mechanical stirrer overhead stirrer, product description, laboratory stirrer:-, designed for homogenization, emulsification and dispersion and mixing of fluids at high speed, ac universal motor with step less speed regulations for continuous variation of speed as per requirements, reliable performance even in continuous use, technical data, speed range, 0 4000 rpm

A handy, tough and direct dial reading type tablet hardness tester, working as pair of plairs, generates breaking force in single grip. The instrument offers accurate and reproducible results much faster other conventional hardness testers.

Specifications:

• Shaking Method: Up And Down
• Sieve Shaker for Civil Engineering

Dissolution Test Apparatusto carry out simultaneously six tests of dissolution rate of tablets and capsules as per USP standard. These tests are carried out by quality control and R & D Departments in pharmaceutical industry. It consists of constant temperature water bath made of transparent acrylic . Temp. is controlled by fully solid state controller.

Specifications:

• Timer: Microprocessor based preset timer 00:01 to 99:59 Hrs with alarm.
• Bath: Made up of 10mm thick clear acrylic 300mm W X 200mm D X 200mm H
• Heater: 350 watt stainless steel.
• Temperature Controller: Digital Microprocessor Based.

The unit has spring loaded safety valve for pressure adjustment and a dead weight safety valve.Portable Autoclaveis constructed of deep drawn aluminum sheet. To give the aesthetic look the outer is painted with powder coated paint. Provided with double safety valves, pressure gauge and pressure release valve.