Acutec Machining Solutions

VIP Road, Zirakpur, Punjab

Threading Taps & Dies are used for hand or machine tapping of through or blind holes. Threading Taps & Dies are characterized by Straight / Spiral fluted Right and Left Hand. Materials used for Threading Taps & Dies include HSS, Carbon & special steels. The forms of thread in Threading Taps & Dies include BSF / BSW / UNF / UNC / MM / BA / BSP / BSPT / ACME. Dies are usually made from high quality Tool steel, and though hardened; these rolls can be reconditioned and used again. Types Available

• Hand Taps- DIN 352
• Machine Taps- DIN 352, DIN 2181, DIN 374, DIN 376 TAPS
• Metric taps and dies
• Inch (ANSI) taps and dies
• ACME screw thread taps and dies
• Stub ACME taps
• Trapezoidal thread taps and dies (metric ACME taps and dies)
• Buttress taps
• Lowenherz taps
• BA taps
• BS taps
• BP taps
• Whitworth thread taps and dies
• Taps BSW
• BSF taps
• UNC ANC NC Tap
• UNF ANF NF taps sets
• Metric taps
• Metric Fine tap set
• BA taps
• Circular Thread Rolling Dies
• Flat Thread Rolling Dies

Uses Of Dies : Used for cutting external threads and are adjustable to cut smaller size threads Available in

• Machine screw
• Fractional
• Pipe
• Metric sizes
• Mostly available in the same thread forms as the taps

Material : HSS, Carbon & special steels

Acutec is engaged in the provision of Radial Drilling Machine in wide variety. Radial Drilling Machine is mainly designed to drill holes in different materials. Radial Drilling Machine provided by us is well-built, dependable, efficient and durable. Radial Drilling Machine is created using finest quality material to assure simple operation, low maintenance and high performance. We offer Radial Drilling Machine that features lower noise and reduced vibrations. Our Radial Drilling Machine is ultra-modern and highly accurate. In addition to drilling, Radial Drilling Machine allows making external countersinking, external counter boring, threading and external center pointing as long as the suitable tools are fitted.

The company provides Milling Machine which is either horizontal or vertical. Milling machine involves movement of the work-piece against the rotating cutter, and the latter is able to cut on its flanks as well as its tip. Milling Machine can also operate like a Drilling Machine, in which the work-piece is held stationary and the drill is moved vertically to penetrate the material. The precision of Milling Machine can be controlled to 0.001 inches (0.025 millimeters). Milling machine may be manually operated, mechanically automated, or digitally automated by computer numerically controlled (CNC). Milling machines can perform a vast number of operations, some very complex, such as slot and keyway cutting, drilling, die-sinking, rebating, routing, etc. Cutting fluid is often pumped to the cutting site to cool and lubricate the cut, and to sluice away the resulting swarf. Types Of Milling Machines

• Horizontal Milling Machines
• Vertical Milling Machines
• Universal Milling Machines

Optional Accessories

• Vertical Milling Attachment
• Slotting Attachment
• Rack Cutting Attachment
• Dividing Head
• Rotary Table
• Milling Vice

Our company is engaged in the process of manufacturing, supplying and exporting well-designed Spring Tempered Steel Rules. Spring Tempered Steel Rules provided by us feature a satin chrome finish. Spring Tempered Steel Rules consist of graduations at 32nds and 1/2mm on one side and 64ths and mm on reverse. Spring Tempered Steel Rules also feature single row of inch figures. Features

• Attractive, protective case with see-through front
• Full 6" with Millimeter Reading to 15mm; plus a Blank End
• Satin chrome finish

ACUTEC is a market leader of high quality Tool & Cutter Grinding Machine. We offer Tool & Cutter Grinding Machine to meet everything from large scale manufacturing to entry level production requirements. The company is renowned for the flexibility of its tool design software and machines which enables you to produce a wide variety of complex tools. These include grinding end mills, profile cutters, burrs and punches. Tool & Cutter Grinding Machine is the perfect choice for the production and sharpening of all your HSS and carbide cutting tools. Tool & Cutter Grinding Machine is manufactured using premium quality material procured from trusted vendors. Our range of Tool & Cutter Grinding Machine is best known for its long functionality and corrosion resistivity.

We provide Cylindrical Tool Holder, which is manufactured to meet or exceedISO, HSK or DIN standards. We also produce Cylindrical Tool Holder in customized designs as well. The clamping function of Cylindrical Tool Holder is available for use with Weldon tool holders, shrink fit, or collet chucks. We make Cylindrical Tool Holder available at industry leading prices. Details

• Type : BT(MAS403), SK(DIN69871), CAT(ANSI), HSK(DIN69693)
• Fine Balanced : G2.5/24000rpm

Specifications

L1	L2	L	Ø D
80	53	145.4	32
120	93	185.4
150	123	215.4

The company manufactures internal and external Cylindrical Grinding Machine, for small and mid-sized work pieces. Whether you need a solution for short-run jobs with fast turn-around or large-scale automated production, Studer Cylindrical Grinding Machine has the best price to performance ratio in the business. We make Cylindrical Grinding Machine available in customized designs as well. Cylindrical Grinding Machine available with us, is dimensionally precise and highly efficient. Highlights

• Well-designed
• Dimensionally precise
• Reasonable prices
• Low maintenance

Precision Vices are manufactured to exacting tolerances and are suitable for all high tolerance machining and milling operations. Precision Vices are made from close grained high tensile cast iron. The jaws of Precision Vices are made from fully hardened and ground steel. The bearing surface is accurately ground flat within 30 microns (0.0012). The 360 degree swivel base of Precision Vices, where applicable, is accurately graduated in one degree increments. Types Available

• Machine Vices
• Tool Makers Vice
• Self-Centering Vice
• Sliding Tilting Vice
• Swivel Vices
• 2-3 way vices
• Bench Vices

Roughing End Mills are designed with a variety pitch styles for roughing or hogging large amounts of metal. Acutec offers an assortment of Roughing End Mills in the form of enter cutting, solid carbide End Mills, in Stub and Regular lengths, to fit your application needs. Roughing End Mills are supplied in Solid Carbide and HSS. Features And Specifications

• Carbide End Mills - for Aluminum and Hard Milling
• For Maximum stock removal in titanium and other high strength materials
• Manufactured from premium micrograin carbide
• Tolerances Dia, --+.000 mm /-.051 mm.
• Shank Dia. --+ .000 mm/-.013 mm
• Shank tolerance

The company is a reputed Manufacturer, Supplier and Exporter of Gear Hobs. Gear Hobs provided by us features maximum accuracy. Gear Hobs provided by us are designed to meet specifications, with any type of profile modification like protuberance, chamfering, topping and tip relief. Gear Hobs are supplied in single or multi-starts, generally according to profile DIN 3972 in Class AA, A and B as per DIN 3968. Types of Gear Hobs available with us include Pre Shaving Hobs, Roughing Gear Hobs and Pre Grinding Gear Hobs. Specifications

• Module : 0.1 to 40 (24 mm to 360 mm diameter)
• DP : 120 DP to 0.7

Other Information : DP Gear Hobs, Module Gear Hobs, Standard Gear Hobs in Stock Types Available

• Spline Hobs are manufactured as per standard and as per specific requirements of the customers, for Straight Sided Splines and Involute Splines.
• Spline Hobs in class 'A', 'AA', 'B' Ground profile
• Involute Spline Hobs as per DIN 5480, 5481 & 5482, NFE 22 141, ANSI B92.1
• Spline Hobs for Power Take off Shafts according to DIN 9611
• Roller Chain Sprocket Hobs are supplied as per ANSI, BS, IS or any other standards or with non-standard forms. These hobs are offered with ground or unground profiles and topping or non-topping designs.
• Timing Belt Pulley Hobs are made to cut various types of Timing Pulleys like

• Syncroflex
• UNIROYAL , Powergrip GT
• HTD
• According to DIN 7721 , ISO 52

We are a Patiala-based company, engaged in manufacturing, supplying and exporting Circular Saw Blades. Circular Saw Blades provided by the company are meant for metal and have fine teeth. Circular Saw Blades that have teeth form A, are recommended for slotting the fragile and hard materials as well as narrow slotting & sawing applications in thin materials. Circular Saw Blades with teeth form A are suitable, especially on the thin saw blades with tooth pitch from 0.8 mm to 3.0 mm. The cutting edge of Circular Saw Blades is very sharp. Also, the chip clearance of Circular Saw Blades is reduced, and it cannot remove longer chips from the cutting area efficiently. Features

• Slitting saws in imperial sizes with fine pitch as to DIN 1837 Toothform A.
• Hollow ground on both sides to prevent binding
• DIN 1838 Metal Slitting Saws with Side chip Clearance and Screw Slotting cutters available

Used for : Shallow cutting and cut-off operations.

We are a trusted manufacturer, supplier and exporter of heavy duty profile projector. Heavy duty profile projector provided by us is characterized by horizontal light path. Heavy duty profile projector is designed for large bulky and heavy components. Heavy duty profile projector is economically used with easy-to-use motorized traverse. applications

• large lead screws
• crank shafts
• broaches
• gears
• engine blocks
• turbine blades
• salient features
  • objective lenses from sill optics, germany
  • on-screen accuracy within +- 0.05 percent as against +- 0.1 percent offered by japanese manufacturers.
  • full color images with depth perception
  • precision imported cross roller and l. M. Guides for high accuracy and repeatability.
  • calibrated at 20 degrees centigrade with masters from uk
  • traceable to international standards
  • hardened and ground work-stages
  • satin hard chrome plated.
  • high intensity
  • turret mounted lenses for safety ease of use, with common focal plane
  • optional fiber, optic auto edge detector fitted on swivel bracket
  • precision swiss motors and variable speed drives for motorized work-stages.
  • projectors ce marked and tested by tuv for safety, emi & emc
  • available with
    • simple x, y & angle dro
    • geometric data processor
    • computer based geometric measurement system : for inspection, measurement, obtaining drawings with passfail reports and spc analysis
    • specifications
      • accuracy : 0.05% on profile and surface
      • measuring range : xy axis 350x250mm
      • focusing : 100mm
      • resolution : 0.001mm
      • measuring system : built in glass scales
      • digital read out functions with zero setting, inchmm
      • absinc circle radius & centre
      • x axis quick displacement