Normally double mechanical seal is used where maintenance with the water is not approved, and the atmosphere that the seal has to bear contains greatly corrosive and toxic materials. They are specially planned as per the clients requirements. It works well with the temperature level of 30 degree c to 200 degrees c. We serve the double mechanical seal faces of the silicon, carbon, ceramic, tungsten, carbide and silicon carbide. Double mechanical seal is very easy to run and simple to install. Double mechanical seal manufactures believe in developing the product as per clients specific requirement, which helps the Double mechanical seal suppliers in maintaining the healthy relation with the customers. Being a double mechanical seal supplier, we serve advance quality product to our valuable customers.

The double-mechanical seal construction consists of two self-sufficient seals mounted inside the seal chamber outer surface of the pump, which is flushed with a self-sufficient water supply at a flow rate of around two to four gallons per hour (least amount) and a load is less superior to the highest expected to function pressure of the pumped solution. This water might be re-circulated for prevention purposes, provided a cooling of alike is fulfilled when necessarily.

A use of the double-mechanical seal permits the worker to monitor the seal water, looking for the discoloration to point out that the primary seal has started to leak. The seal water has to be disposed of, but, not like the single seal, the collected amount of liquid can be disposed of in an appropriate way. Also, double seal design allows the use of a smaller amount of exotic inboard seal material so when an alternative is necessary it is less costly.

It will be good to use a double-mechanical seal when hazardous liquids are being pumped where it will not possible to hold the leakage in an appropriate manner with a single-mechanical seal. As such, the water being used to lubricate the double seal can be collected and stored in the control vessel for appropriate disposal. Our products are very user friendly and lightweight The Active engineering company has believed in giving long service life of the products. We would like to tell you that, we manufacture, supply and export the mechanical seal, so you can surely trust on our reliability and quality performance. We are renowned wholesale dealer of Ahmadabad, and us develop and create a product as per customers requirement. We have experience of market and fabrication; we have a strong technological background, which makes our company more powerful in this competitive world.

We are concerned with offering a broad range of Cartridge Seals that includes Single Slurry Cartridge Seal, Dual Cartridge Seal, Double Slurry Cartridge Seal and Metal Bellow Cartridge Seal, High Pressure Dual Cartridge Seal &. Cartridge Seals are pre-assembled mechanical seals with important sleeve, gland plate and are ready-to-install on diversity of fluids. This Cartridge Mechanical Seal is balanced and planned in such a way to ignore liquid contact with the spring, therefore, discovers usage about all types of liquids. Such seals do not need modification in fitting due to pre-assembly, hence avoid fitting problem. Cartridge Seals are particularly designed to deal with highly corrosive and rough media. An array is presented in diverse cartridge and semi-cartridge version. Being a cartridge seal manufacturer, we develop our products as per the modern trend; it helps in running our business smoothly. A cartridge seal supplier has to think about various things like innovative ideas as per time, the advancement of technology according to the requirements. A good cartridge seal supplier should promote their business with complete transparency and flexibility.

Cartridge seal series and mechanical series are assembled cartridge seal, which we can directly fit the pump. These seals have an integral sleeve along with the gland plate. Cartridge mechanical seals are offered with double and single sealing arrangements.

Balanced mechanical seal is made up from high quality raw material; this seal is normally used in sugar industries. Balanced mechanical seal is used to clear water, petrol, kerosene and diesel. The best thing about this seal is very easy to install and very simple to remove. It occupies the less space. Mechanical seal is the most important operating aspect of any company. Balanced mechanical seal suppliers in Ahmadabad will try to attract you with their new products, but before choosing the mechanical sealing company, you should go through with their experience of work, just make sure that the particular company can provide you a complete satisfaction towards your mechanical seal. Being a best balanced mechanical seal manufacturer, we promise you to serve you the best quality product along with the best customer support services than others. A great balanced mechanical seal supplier should have the knowledge about the advance techniques and tools, so that will help them to raise their business on a large level.

Balancing the mechanical seal includes an easy design alter, which reduces the hydraulic forces performing to shut the seal faces. Balanced seal has a higher-pressure limit, lower seal face loading, and produce less heat. This makes them finely suitable to handle liquids with low lubrication and high vapor pressures like light hydrocarbons.

Our talented team and sound infrastructural bring a complete solution to fluid sealing for diverse industrial application. We use advanced technology fine quality raw material for the creation of the seals. We produce products that are completely dependable.

The Active engineering company considered as a good acclaimed supplier in Ahmadabad. We offer diversely of seals to the customers. We provide our services in the field of chemical and mechanical industries. Our long term relationship with customers builds our reputation very honest and reliable in the market.

We also serve an exclusive range of balanced mechanical seal to our customer at company leading prices. Our balanced mechanical seal has attached with an o-ring, which works as a secondary ring. Even we check our range on the basis of diverse quality parameters that ensure its effectiveness. The Active engineering company of Ahmadabad is committed to meet the large amount of demand of their customer within the time limit.

Balanced seals are outwardly mounted, balanced seals with o-ring as a secondary seal. A variety of seal face material and o-ring will be used for a large range of application. These seals are appropriate for handling mainly of the corrosive media with a few solid contents.

We at Active Seals manufacture the Teflon Bellow Seals of a high range. The products are manufactured using high-quality raw materials, which are procured from renowned vendors of this market. We do not compromise on quality at all. The products require low maintenance and are very easy to handle and use. The seals of the product are well fabricated from virgin Teflon for efficient use. The seals are so made that they are independent of the direction of rotation and is of balanced type Bellow. This makes it a reliable and flexible bellow seal. We are the Teflon Bellow Seal Manufactures providing you with seals which are perfectly suitable for the application for the corrosive chemicals, oxidizing, and reducing agents and acidic.

The products of our company are recognized for its flawlessness and for standing up to the expectations of the clients. The seals are used for purpose of ensuring the fine flow of pipelines from the primary glass equipment. We at Active Seals have well fabricated the Bellow Seals for its variety of applications in various industries. We as the Teflon Bellow Seal Suppliers provide with the Bellow Seals that can be used efficiently for the prevention of the backflow and keeping the pressure well under control. The seals are extensively used in various industries like petrochemical, chemical, pharmaceutical and many more such industries.

The company also manufactures PTFE Mechanical Seals. The Active Seal is the popular manufacturing company which provides with PTFE Mechanical Seals. We as the Teflon Bellow Seal suppliers deal with all types of PTFE and ceramic mechanical seals. This product is a highly corrosive component. We use the virgin PTFE Material to make this product so that it comes out as an output which is flawless. It is most demanded in the petrochemical, chemical and pharmaceutical industries and has a vast usage in the refineries. These are cost effective as a corrosive media sealing.

The Teflon Bellow Seal is widely used in acids, alkalis and in extremely corrosive services. We as Active Seals ventured into this business so as to provide with the requirements of various industries in general, and the mechanical seals and the valves industry specifically. We offer with a wide range of products at highly competitive rates but not compromising on the quality standards. We offer the customized products of PTFE which are extensively used in the process industries to seal the materials. We strongly believe in customer satisfaction and thus keep coming up with innovative ideas to cater to our clients changing demands and requirements.

To Be Use For :

• Extremely Corrosive servies
• Acid & acidic atmosphere
• General & Light Chemicals

Operating Limits :

• Shaft Diameter : 18mm to 100mm
• Pressure : Vacuum 5 bar
• Temperature : -45oC to +180oC

Material Of Construction :

• Sealing faces : Carbon, Ceramic(99.5 %), Silicon Carbide, PTFE, GFT, CFT
• Elastomer :PTFE, GFT, CFT
• Hardware : SS 316, Hastelloy C, Monel, Alloy 20

The Active engineering company has a top position among the leading industries and suppliers of a rubber bellow seal. We manufacture the product from the top quality raw material along with the advance technology. These kinds of products are mainly used in plastic immersion, pumps, centrifugal pumps and many other firms. We are a famous supplier of an array of rubber bellow seal. Before the final delivery, our products are thoroughly checked by our quality team for smooth running of the business. Rubber bellow seal manufacturers maintain their business on the basis of reliability, honesty and healthy relationships. Being a best Rubber bellow seal supplier in Ahmadabad, we need to create the diversity, of seal as per clients requirement and we put innovative ideas while making the product as per time. Rubber bellow seal supplier is develop their business by providing good quality products and complete customer satisfaction to their precious customer.

This kind of seal can be used in spite of way of rotation, because the torque acting is not transmitted the coils. This sort of seal used in sewage applications and also with the waste water application. Rubber bellows seal is used in diverse of industries for various applications as per the needs of the products like single, back to back and face to face arrangement. The best thing about the rubber below seal is very economical and easy to maintain.

These seals are used in cold water as well as hot water, oil pumps, refrigeration compressor and fuel injection pumps. The active engineering company is engaged in serving rubber bellow seal, manufactured by their talented professionals, who have tremendous knowledge in this domain .These commodities are produced with the best quality raw material along with latest machines. The offered commodities are available in various forms, sizes as per the requirement from our dear customer. Its special features are as follows

• Long service life
• Unparalleled quality
• Bendable

At Active seals we are designing some of the best and high quality Rotary Shaft Seals. The Shaft Seals designed and developed are extremely flexible and reliable in the quality of their make. Since they are designed by industry expert technicians they are flawless and of utmost quality. Our experience and use of modern technology in supplying and fabricating range of Shaft seals make us one of the leading Rotary Shaft Seal Manufacturers in the country. We boast in manufacturing some of specific shaft seals as required by many of our clients from across the industry.

The Primary function of the shaft seal is to prevent leakage and provide shield from the media getting contaminated. In order to manufacture quality shaft seals we have the full instruments and machinery. Some of the industry experts are toiling 24x 7 to deliver some of the custom shaft seals as demanded by our specific clients. We train our technician teams to keep them updated with the latest trends and market developments. Due to the better management and coordination along with best technology we have created a niche in the industry we serve in.

There are various types of shaft seals that are manufactured at Active seals. We are not only the manufacturers but we are also Rotary Shaft Seal Suppliers in the industry. Some of the shaft seals manufactured at our company are high temperature seals, agitator seals, compressor seals and high pressure seals along with many other varieties of specific manufacturing. We also have the capacity to develop and design seals specific to the requirements of clients. The seals are mostly in high demand in the fields of Paper and pulp, Petrochemical industry, refineries and sugar industry and some chemical and other allied industries. The Seals manufactured by Active seals are sturdy and strong to take any bearing on them.

With a lot of features and strong characteristics the shafts seals are extremely long lasting and durable. The diameter of shaft determines the type of shaft seal required. Also it is highly dependent on the speed of shaft for its rotation. We always take into account the main factors that determine the designing of shaft, which are mainly the temperature, and pressure that they will be exposed to. Every shaft seal manufactured at Active seals will have longer service life since they are manufactured with best available raw materials. The shaft seals provided by our company are reliable and optimum in quality with excellent performance guaranteed.

Application

• Industrial gear
• Compressor
• Rolling mills
• Washing machines
• Diesel engines
• Agriculture
• Mechanical units
• Food industries
• Chemical industries
• Pharmaceutical industries

Normally double mechanical seal is used where maintenance with the water is not approved, and the atmosphere that the seal has to bear contains greatly corrosive and toxic materials. They are specially planned as per the clients requirements. It works well with the temperature level of 30 degree c to 200 degrees c. We serve the double mechanical seal faces of the silicon, carbon, ceramic, tungsten, carbide and silicon carbide. Double mechanical seal is very easy to run and simple to install. Double mechanical seal manufactures believe in developing the product as per clients specific requirement, which helps the Double mechanical seal suppliers in maintaining the healthy relation with the customers. Being a double mechanical seal supplier, we serve advance quality product to our valuable customers.

The double-mechanical seal construction consists of two self-sufficient seals mounted inside the seal chamber outer surface of the pump, which is flushed with a self-sufficient water supply at a flow rate of around two to four gallons per hour (least amount) and a load is less superior to the highest expected to function pressure of the pumped solution. This water might be re-circulated for prevention purposes, provided a cooling of alike is fulfilled when necessarily.

A use of the double-mechanical seal permits the worker to monitor the seal water, looking for the discoloration to point out that the primary seal has started to leak. The seal water has to be disposed of, but, not like the single seal, the collected amount of liquid can be disposed of in an appropriate way. Also, double seal design allows the use of a smaller amount of exotic inboard seal material so when an alternative is necessary it is less costly.

It will be good to use a double-mechanical seal when hazardous liquids are being pumped where it will not possible to hold the leakage in an appropriate manner with a single-mechanical seal. As such, the water being used to lubricate the double seal can be collected and stored in the control vessel for appropriate disposal. Our products are very user friendly and lightweight The Active engineering company has believed in giving long service life of the products. We would like to tell you that, we manufacture, supply and export the mechanical seal, so you can surely trust on our reliability and quality performance. We are renowned wholesale dealer of Ahmadabad, and us develop and create a product as per customers requirement. We have experience of market and fabrication; we have a strong technological background, which makes our company more powerful in this competitive world.

We are concerned with offering a broad range of Cartridge Seals that includes Single Slurry Cartridge Seal, Dual Cartridge Seal, Double Slurry Cartridge Seal and Metal Bellow Cartridge Seal, High Pressure Dual Cartridge Seal &. Cartridge Seals are pre-assembled mechanical seals with important sleeve, gland plate and are ready-to-install on diversity of fluids. This Cartridge Mechanical Seal is balanced and planned in such a way to ignore liquid contact with the spring, therefore, discovers usage about all types of liquids. Such seals do not need modification in fitting due to pre-assembly, hence avoid fitting problem. Cartridge Seals are particularly designed to deal with highly corrosive and rough media. An array is presented in diverse cartridge and semi-cartridge version. Being a cartridge seal manufacturer, we develop our products as per the modern trend; it helps in running our business smoothly. A cartridge seal supplier has to think about various things like innovative ideas as per time, the advancement of technology according to the requirements. A good cartridge seal supplier should promote their business with complete transparency and flexibility.

Cartridge seal series and mechanical series are assembled cartridge seal, which we can directly fit the pump. These seals have an integral sleeve along with the gland plate. Cartridge mechanical seals are offered with double and single sealing arrangements.

Balanced mechanical seal is made up from high quality raw material; this seal is normally used in sugar industries. Balanced mechanical seal is used to clear water, petrol, kerosene and diesel. The best thing about this seal is very easy to install and very simple to remove. It occupies the less space. Mechanical seal is the most important operating aspect of any company. Balanced mechanical seal suppliers in Ahmadabad will try to attract you with their new products, but before choosing the mechanical sealing company, you should go through with their experience of work, just make sure that the particular company can provide you a complete satisfaction towards your mechanical seal. Being a best balanced mechanical seal manufacturer, we promise you to serve you the best quality product along with the best customer support services than others. A great balanced mechanical seal supplier should have the knowledge about the advance techniques and tools, so that will help them to raise their business on a large level.

Balancing the mechanical seal includes an easy design alter, which reduces the hydraulic forces performing to shut the seal faces. Balanced seal has a higher-pressure limit, lower seal face loading, and produce less heat. This makes them finely suitable to handle liquids with low lubrication and high vapor pressures like light hydrocarbons.

Our talented team and sound infrastructural bring a complete solution to fluid sealing for diverse industrial application. We use advanced technology fine quality raw material for the creation of the seals. We produce products that are completely dependable.

The Active engineering company considered as a good acclaimed supplier in Ahmadabad. We offer diversely of seals to the customers. We provide our services in the field of chemical and mechanical industries. Our long term relationship with customers builds our reputation very honest and reliable in the market.

We also serve an exclusive range of balanced mechanical seal to our customer at company leading prices. Our balanced mechanical seal has attached with an o-ring, which works as a secondary ring. Even we check our range on the basis of diverse quality parameters that ensure its effectiveness. The Active engineering company of Ahmadabad is committed to meet the large amount of demand of their customer within the time limit.

Balanced seals are outwardly mounted, balanced seals with o-ring as a secondary seal. A variety of seal face material and o-ring will be used for a large range of application. These seals are appropriate for handling mainly of the corrosive media with a few solid contents.

We at Active Seals manufacture the Teflon Bellow Seals of a high range. The products are manufactured using high-quality raw materials, which are procured from renowned vendors of this market. We do not compromise on quality at all. The products require low maintenance and are very easy to handle and use. The seals of the product are well fabricated from virgin Teflon for efficient use. The seals are so made that they are independent of the direction of rotation and is of balanced type Bellow. This makes it a reliable and flexible bellow seal. We are the Teflon Bellow Seal Manufactures providing you with seals which are perfectly suitable for the application for the corrosive chemicals, oxidizing, and reducing agents and acidic.

The products of our company are recognized for its flawlessness and for standing up to the expectations of the clients. The seals are used for purpose of ensuring the fine flow of pipelines from the primary glass equipment. We at Active Seals have well fabricated the Bellow Seals for its variety of applications in various industries. We as the Teflon Bellow Seal Suppliers provide with the Bellow Seals that can be used efficiently for the prevention of the backflow and keeping the pressure well under control. The seals are extensively used in various industries like petrochemical, chemical, pharmaceutical and many more such industries.

The company also manufactures PTFE Mechanical Seals. The Active Seal is the popular manufacturing company which provides with PTFE Mechanical Seals. We as the Teflon Bellow Seal suppliers deal with all types of PTFE and ceramic mechanical seals. This product is a highly corrosive component. We use the virgin PTFE Material to make this product so that it comes out as an output which is flawless. It is most demanded in the petrochemical, chemical and pharmaceutical industries and has a vast usage in the refineries. These are cost effective as a corrosive media sealing.

The Teflon Bellow Seal is widely used in acids, alkalis and in extremely corrosive services. We as Active Seals ventured into this business so as to provide with the requirements of various industries in general, and the mechanical seals and the valves industry specifically. We offer with a wide range of products at highly competitive rates but not compromising on the quality standards. We offer the customized products of PTFE which are extensively used in the process industries to seal the materials. We strongly believe in customer satisfaction and thus keep coming up with innovative ideas to cater to our clients changing demands and requirements.

To Be Use For :

• Extremely Corrosive servies
• Acid & acidic atmosphere
• General & Light Chemicals

Operating Limits :

• Shaft Diameter : 18mm to 100mm
• Pressure : Vacuum 5 bar
• Temperature : -45oC to +180oC

Material Of Construction :

• Sealing faces : Carbon, Ceramic(99.5 %), Silicon Carbide, PTFE, GFT, CFT
• Elastomer :PTFE, GFT, CFT
• Hardware : SS 316, Hastelloy C, Monel, Alloy 20

The Active engineering company has a top position among the leading industries and suppliers of a rubber bellow seal. We manufacture the product from the top quality raw material along with the advance technology. These kinds of products are mainly used in plastic immersion, pumps, centrifugal pumps and many other firms. We are a famous supplier of an array of rubber bellow seal. Before the final delivery, our products are thoroughly checked by our quality team for smooth running of the business. Rubber bellow seal manufacturers maintain their business on the basis of reliability, honesty and healthy relationships. Being a best Rubber bellow seal supplier in Ahmadabad, we need to create the diversity, of seal as per clients requirement and we put innovative ideas while making the product as per time. Rubber bellow seal supplier is develop their business by providing good quality products and complete customer satisfaction to their precious customer.

This kind of seal can be used in spite of way of rotation, because the torque acting is not transmitted the coils. This sort of seal used in sewage applications and also with the waste water application. Rubber bellows seal is used in diverse of industries for various applications as per the needs of the products like single, back to back and face to face arrangement. The best thing about the rubber below seal is very economical and easy to maintain.

These seals are used in cold water as well as hot water, oil pumps, refrigeration compressor and fuel injection pumps. The active engineering company is engaged in serving rubber bellow seal, manufactured by their talented professionals, who have tremendous knowledge in this domain .These commodities are produced with the best quality raw material along with latest machines. The offered commodities are available in various forms, sizes as per the requirement from our dear customer. Its special features are as follows

• Long service life
• Unparalleled quality
• Bendable

At Active seals we are designing some of the best and high quality Rotary Shaft Seals. The Shaft Seals designed and developed are extremely flexible and reliable in the quality of their make. Since they are designed by industry expert technicians they are flawless and of utmost quality. Our experience and use of modern technology in supplying and fabricating range of Shaft seals make us one of the leading Rotary Shaft Seal Manufacturers in the country. We boast in manufacturing some of specific shaft seals as required by many of our clients from across the industry.

The Primary function of the shaft seal is to prevent leakage and provide shield from the media getting contaminated. In order to manufacture quality shaft seals we have the full instruments and machinery. Some of the industry experts are toiling 24x 7 to deliver some of the custom shaft seals as demanded by our specific clients. We train our technician teams to keep them updated with the latest trends and market developments. Due to the better management and coordination along with best technology we have created a niche in the industry we serve in.

There are various types of shaft seals that are manufactured at Active seals. We are not only the manufacturers but we are also Rotary Shaft Seal Suppliers in the industry. Some of the shaft seals manufactured at our company are high temperature seals, agitator seals, compressor seals and high pressure seals along with many other varieties of specific manufacturing. We also have the capacity to develop and design seals specific to the requirements of clients. The seals are mostly in high demand in the fields of Paper and pulp, Petrochemical industry, refineries and sugar industry and some chemical and other allied industries. The Seals manufactured by Active seals are sturdy and strong to take any bearing on them.

With a lot of features and strong characteristics the shafts seals are extremely long lasting and durable. The diameter of shaft determines the type of shaft seal required. Also it is highly dependent on the speed of shaft for its rotation. We always take into account the main factors that determine the designing of shaft, which are mainly the temperature, and pressure that they will be exposed to. Every shaft seal manufactured at Active seals will have longer service life since they are manufactured with best available raw materials. The shaft seals provided by our company are reliable and optimum in quality with excellent performance guaranteed.

Application

• Industrial gear
• Compressor
• Rolling mills
• Washing machines
• Diesel engines
• Agriculture
• Mechanical units
• Food industries
• Chemical industries
• Pharmaceutical industries