Our Products
Oil Plant And Extraction Machinery
2 Products availableMeasurement Gauges & Fittings
2 Products availableCompression Testers
2 Products availableLaboratory Shakers
2 Products availableFashion Jewelry
1 Products availableWe offer a complete product range of CTM HAND OPERATED Compression Testing Machine, Flexure Testing Machine, Los Angeles Abrasion Testing Machine, Deval Abrasion Testing Machine and Abrasion Testing Machine
CTM Channel type, hand operated, double plunger pump, single pressure gauge
i) 1000 KN capacity
ii) 1500 KN capacity
iii) 2000 KN capacity
The Flexural Testing Machine consists of a motorized load frame. The lower platen has two rollers, the distance between which is adjustable. For 150 mm x 150 mm x 700 mm beam, the centre distance between the rollers is 600 mm, while it is 400 mm for beams of size 100 mm x 100 mm x 500 mm. The upper platen has also a pair of rollers whose distance adjustable. It is 200 mm centre to centre, for 150 mm x 150 mm x 700 mm size beam and 133 mm for 100 mm x 100 mm x 500 mm size beam. Total capacity of the machine is 100 KN. 150mm dia pressure gauge of 0-100 KN x 1 KN least count to indicate load is fixed on the load frame. A separate electrically cum hand operated pumping unit housed in a cabinet is supplied. On/Off switch and a slow/fast lever to control rate of loading are fitted on the front panel of the pumping unit. A facility for hand operation is provided. A micro switch and relay fitted inside the pressure gauge protect the unit from over loading.
Optional Accessories :
Hand operated version consists of a load frame. A small hand pumping unit is attached to the load frame. Since this is a hand operated light weight machine. It is useful for field laboratory also.
Determining the aggregate Impact value of coarse aggregate. Consists of a base weighing between 22-30kg with a lower surface of not less than 30cms and support columns to from a rigid frame work around the quick re. lease trigger mechanism to ensure an effective free fall of the hammer during test. The free fall can be adjusted through 380 5.0mm. The hammer is provided with a locking arrangement. A metal tub (Hammer) weighing13.5 to 14.0 kg. The lower end in cylindrical shape, 100mm in diameter and 5cm long with a 2mm chamber at the lower edge and case hardened.
Complete with a cylindrical cup, 102mm dia x 50mm depth, One measure 75mm dia x 50mm deep and tamping rod of circular cross section 10mm in diameter and 230mm long rounded at one end.
