Accurate Springs Pvt Ltd

Vasai, Mumbai, Maharashtra

Compression springs are the easiest type to make. Can be made more rapidly and accurately than other types and should be used in preference to other types wherever possible. Avoid using open ends or open and ground ends. Such springs usually tangle when shipped. They also buckle when deflected. Use closed ends only and avoid grinding whenever possible, especially on light wire sizes under 0.60 mm or where a large spring index Omd prevails such as 13 or larger. Grinding is a slow and expensive operation. 4. Use conical springs when a short, solid height is needed and to reduce buckling. Avoid using conical, barrel shaped, or other special shapes, where a standard helical spring could be used.

We manufacture compression springs from Wire dia 0.1 mm to 12.5 mm. A type of spring designed to support tension, or pulling loads. Extension springs are also called tension springs. The difference between helical compression and helical extension spring is in the direction of load application and the method by which it is applied. In order to apply the force, special end form numbers have to be used, either utilizing the formed end coils or special hook. The more complex the end formation the greater the manufacturing tolerances & greater the manufacturing cost.

We manufacture wire form springs fully on automatic CNC machines. It must be remembered that a wire form of similar shape & dimensions may exert different forces due to different manufacturing methods adopted. There is a special wire forming machine for making complicated products including multisided machines.