Our Products
Surgical Equipment & Supplies
2 Products availableRubber Sheet
2 Products availableRubber & Rubber Products
2 Products availableRubber Tubes
2 Products availableOur product range contains a wide range of Millable Polyurethane Rubber, Spline Bush and Silicone Coated Sieves
Accurate Rubber Industries is leading high quality Industrial Rubber Sheets Manufacturers & Suppliers in Mumbai (India) using various Elastomers like VITON, SILICONE, NEOPRENE, NITRILE, BUTYL, HYPALON etc. depending upon the end use. These sheets are available with smooth finish, cloth impression finish.
ACCURATE offer Fluorocarbon (VITON) & Silicone Rubber Sheets:
Features of SILICONE SHEETS:Millable urethanes are specially polymers that have found use in applications that need the unique combination of properties that uretahnes offer: excellent abrasion resistance, tensile and tear strength, oil resistance, low temperature flexibility and ozone resistance. Urethanes are inherently very good for resistance to gas permeability as well, but this property was improved upon with development of new polymer which combines excellent nitrogen permeability with excellent low temperature flexibility. Another new polymer filled a gap in the range of commercial polymer by being developed for wet food handling requirements. These two new polymers expand the range of application where millable urethanes could use.
Molded parts based on millable polyurethane rubber make a perfect choice for seals, gaskets, O-rings, membranes, CV-boots, dust cover, mounts and bearing for the automotive industry. Millable polyurethane are also widely used at the production of rollers and drive belts for many business machines. Other market includes footwear, mechanical engineering and plant construction, the textile industry, the petroleum industry, and transportation and vehicle construction. Typical applications are tile molds, hydraulics gaskets, diaphragms, seals, belt, roller covering, vibration insulators, bumpers, pump stators, cable jackets, sand blaster and shoe soles.
Accurate Rubber Industries is leading high quality Industrial Rubber Diaphragms Manufacturers, Suppliers & Exporters in Mumbai (India). Our versatile seals used in wide range of application to handle various fluids, air and vacuum sealing and flow requirements. Our rubber diaphragms are custom designed and engineered to operate specific pressures and pressure changes, mechanical; requirements, fluid interaction and dynamic life.
Rubber diaphragms can be tuned for unique application characteristics through components and material design, to optimize final assembly performance and cost. Diaphragms are sealing & moveable dividing membranes between two components. Its function is to fulfil switch, control, valve, pump and accumulator functions. We are manufacturing rubber diaphragms that suitable for Pneumatic Control Valves, Actuators, Solenoids, Air Regulators, Angel Type and Pumps.
Rubber Diaphragm Advantages:
They typical butterfly valve consist of disc which can rotate about a shaft in housing. The disc closes against a ring seal to close the flow. We are manufacturing these seals for Butterfly Valves and giving a coat of polymer to disc for perfect leak proofing.
Accurate Rubber Industries is leading high quality Industrial Rubber O Rings, Viton Rubber O Rings Manufacturers & Suppliers in Mumbai (India). O Rings are torus or doughnut shaped rings defined by their Inner Diameter (I.D) & Cross Section (C.S). We provides quality 'O' Rings from as small as 0.74MM (I.D) to 1800MM (I.D) GIANT size without joints (Die Made) in all Elastomers. O Rings are manufactured according to various International Standards viz. AS-568A, Custom and Special Standards etc. We can manufacture any kind of Rubber O Rings & Viton Rubber O Rings.
Accurate Rubber Industriesis leading high quality Industrial Silicone Rubber Products Manufacturers & Suppliers in Mumbai (India).SILICONE BRAIDED TRANSPARENT TUBEShas standard construction of 70 Shore A. inner hose are manufactured from Natural Translucent Silicone Rubber, a braided polyester multi-filaments yarn or fiber glass reinforced an 70 Shore A hardens Silicone Rubber top coating (Natural Translucent). Depending upon the size the tubing can withstand pressure of 5-12 kg/cm2. These hoses are suitable for continue operation at temperature from -60 C to + 150C and for intermittent exposure up to 180C. No harmful toxic or physiological effects. Resistance to Ozone, UV lights and Corona discharge. Silicone Rubber Complies with FDA 21 CFR 177.2600. It can withstand repeated sterilization by autoclave ethylene oxide or gamma radiation. Sizes offered are as per customer's specifications.
Application:
Sr.No | SIZES (In Inches) |
ID (In MM) |
OD (In MM) |
01. | 1/4" | 6 | 13 |
02. | 3/8" | 9 | 16 |
03. | 1/2" | 12 | 20 |
04. | 3/4" | 19 | 27 |
05. | 1" | 25 | 35 |
06. | 1 1/4" | 32 | 42 |
07. | 1 1/2" | 36 | 46 |
08. | 2" | 50 | 60 |
09. | 2 1/4" | 60 | 72 |
Viton Fluoroelastomer Rubber Tubing is known for its resistance to oils and chemicals; this remarkable material retains its good mechanical and chemical resistance properties at extremely high temperatures better than any other known elastomer. Viton is also a standout material in its resistance to weather-related aging and ozone.
Vitons fluid resistance far exceeds that of most other synthetic rubbers. It is resistant to hydro-carbons such as benzene, carbon tetrachloride, toluene, and xylene fluids that normally act as solvents on rubber, disintegrating the material; leading to tubing failure. Engineers looking for exceptional resistance to petroleum-based fuels, oils, lubricants, and mineral acids at elevated temperatures will often turn to Viton because most other thermoplastics cannot meet the necessary resistance levels.
Accurate Rubber Industriesis leading high quality Industrial Rubber Expansion Joints, Rubber Expansion Bellows Manufacturers & Suppliers in Mumbai (India) for Varity of applications in Power Plants, Chemical Industries, Refineries, Heavy Engg. Industries, Petrochemicals, Ship Building etc. etc. Our Rubber Expansion Joints/ Bellows are designed to take care of reactional forces like Thermal Expansion, Contraction, Vibrations which otherwise breaks the pipelines. Depending upon the applications, it is being made up of VITON, SILICONE, NEOPRENE, EPDM & NATRUAL RUBBER. It can be coated inside with Teflon for chemical resistance. It is reinforced with specially treated, NYLON, RAYON, GLASS FIBRE, STEEL CORD etc. our expertise in designing provides perfect balance between Movements (Axial, Radial, Torsional & Angular) and pressure bearing capacity.
ACCURATES Rubber Expansion Joints/ Bellow are available in sizes ranging form 1" NB to 72" NB with hydro testing up to 24 bar pressure. These bellows have either integrated flange (Metallic flanges are bonded with rubber) or Back up flange (Which is split & Separate). These bellows are made as per customers Design, Drawing s & Specifications.
A manufacturing of rubber to metal bonding is a specialized craft. There are various applications in which rubber has to be bonded to metal parts for functional requirements.Such find applications in both statics as well as dynamic conditions. Chemical as well as physical bonding strength has to be developed in the required quantum to withstand the various types of shocks & vibration encountered in the situations existing from time to time. Since failure can result in heavy damage to the machinery or the apparatus resting on such bonding, only the parts made correctly can be recommended for use, rubber to metal bonding comes in wide Varity like Mounting, Bushing, Impellers, Seals, Bearings, Shocks absorbing, buffers etc.
ACCURATE RUBBER INDUSTRIES is a renowned organization dedicatedly involved in the manufacturing and export of PTFE Products. The assortment of products offered by us isPTFE Molded Components, PTFE Molded Bushes, PTFE Extruded Rods, PTFE Extruded Tubes, PTFE Molded Rods, PTFE Molded Sheets etc.With the assistance of our nimble-fingered professionals, we manufacture our products using latest production techniques. Used in large number of industries, our products are highly demanded by our global customers for their attributes.
High performance and durability are the salient features of products available with us. In addition to this, we assure availability of products in different grades and specifications suiting to the needs of customers. Moreover, we guarantee time bound and safe delivery to the desired destination. We are called upon as one of the foremost PTFE Molded Products Manufacturers from India.
We specialize in various Teflon fabricated parts like Rings, Washers, Valve Seats , "O" Rings, Gaskets, Bellows, Diaphragms, PTFE encapsulated o-rings, Balls, Piston Rings, Wear Rings, Packing Rings, Wear Strips, Mechanical Seals, impellers, Nozzles, 'V'Rings set, Stop cock, Laboratory items, Compressor spares etc. We can also supply items made from different filled grades of PTFE like Carbon, Glass, Bronze, Graphite, Mos2, Alumina.