Definition

Auto Change over Panel using by controlling DG START / STOP sequence in accordance to the availability of utility power supply. Also We design & manufacture the AMF panels for various capacity & different make of Diesel EA set. In Conclusion, Being a quality centric organisation, So our entire range of panels is assembled as per industrial quality regulatory norms and conditions.

Standards

All switches and the circuit breakers, connectors should conform to IEC60947, part I, II and III/ IS 60947 part I, II and III by accu panels. Also Electrical standards followed include Indian and international standards like IS 8623, IEC 60529.

Protection Level

Firstly, all indoor panels have protection of IP54 or better even more all outdoor panels have protected with IP65 or better. Secondly, all PCC Panels made by laser cutting CRCA sheet and powder coating with 7-Tank process.

Features :

• Firstly Safe.
• Secondly Durable.
• Thirdly High performance.
• Also Sturdy construction.
• Finally Corrosion resistance.
• Auto/Manual Selector available.
• Auto delay in start of genset.
• Genset stop with delay of 3 minutes.
• Hooter-alarm annunciation for fail to start.
• Checklist to find the fault and to correct.
• 4st switch control for healthy start and stop for genset.
• Manual Start & Stop Switch.
• Emergency Stop switch also available.

Application

Feeder Pillar is an enclosure cum distribution board for electrical equipment or busbar, mounted in the street and various junctions. They provide local isolation from electrical distribution systems. In conclusion, Accu-panels provide IP54, IP55 and IP65 level of protection against dust and water as per client specifications.

FunctionsDistribute the supply of electrical energy from a transformer or solar power and distribute it to load that are main function of mini feeder pillars via busbar and cable. In effect, they are a very basic form of LT power System and solar power system.

What’s New Additionally, all pillar boxes having undergo pretreatment for Decreasing, Water rinsing & De-rusting/ Phosphating, also all electrical pillar box Painted with Powder Coated or Synthetic enamel as per the requirements. After that, seven tank process made by the painter. Similarly, Bus Bars / Internal Wiring uniform cross section and supported by SMC and DMC bases. Similarly, earthing Bus Bars running all along the Panel. In Conclusion, Mini feeder pillar are an important aspect of electrical control panels and LT panels.

Basic IntroductionFeeder pillar is an effective electrical enclosure to provide electrical services for low voltage electrical distribution applications. So mini feeder pillar is main part for all types of Electrical panel boards.

Standards IntroductionAll switches and the circuit breakers, connectors confirmed to IEC60947, part I, II and III/ IS 60947 part I, II and III. Mini feeder pillar confirmed with Electrical standards followed include Indian and international standards like IS 8623, IEC 60529.

SpecificationsThe panels have designed for minimum expected ambient temperature of 45 degrees Celsius, 80 percent humidity and dusty weather. All indoor panels have protected with IP54 or better. All outdoor panels have protected of IP65 or better.

What is solar Ac distribution board?

• All switches and the circuit breakers, connectors should conform to IEC60947, part I, II and III/ IS 60947 part I, II and III.
• Solar ACDB (Ac distribution board) is an important part of SPV system for Solar power Plant. Accu-panels is CPRI approved acdb dcdb manufacturer in india.
• It combines the output 3 phase as well as single phase AC power of  inverter placed in solar plant system into single box called ACDB (AC Distribution Board).

What kind of ACDB is made?We are making customized ACDB according to client’s specifications, such as indoor type (IP52), outdoor type (IP65), floor standing, wall mounting, stand mounting according to the client requirement. Also We provide IP67 Certificate for  Polycarbonate box and IP65 certificate for MS box

What are the Features ?

• ACDB comes with the package of protection devices such as surge protection device (SPD), MCCB/fuse/isolator/MCB. Therefore protecting the electrical circuit from travelling surges, overload and shortcircuit as well as human personnel from earth leakage fault which is fatal.
• It has an Energy meter in which you can easily to read the generated power and current generation values like current, voltage, power factor.
• The specifications and ratings of ACDB vary according to load and inverter capacity.
• We are also making provision of metering and net metering to monitor the consumption and generation of power.
• Fine ferruling, marking, dressing and lugs of internal wiring.

What ABOUT STRUCTURE?

• Accu Panels is making ACDB from 1.6mm / 2mm thick CRCA sheet steel in IP52 and IP65 enclosures as well as transparent IP65 polycarbonate enlosures for small roof top plants upto 30kW.
• We are one of the leading suppliers of the ACDB panel with customized solutions. This is not only user-friendly but also demands minimum maintenance.
• Accu Panels is manufacturing ACDB according to International Electrical standards like IS 8623, IEC 60529 as well as IP65 protection levels.

Our Solar ACDB Products :

• 1-5KW Solar ACDB (Ac Distribution Board) Standard (For single and Three Phase)
• 10-50KW Solar ACDB (Ac Distribution Board) Standard
• 50-1MW ACDB LT Panels as per Client Specifications
• 1in 1out ACDB up to 10KW
• 2in 1out ACDB up to 10KW
• 3in 1out ACDB up to 25KW
• 4in 1out ACDB up to 200KW
• 5in 1out ACDB up to 500KW
• 6in 1out ACDB up to 500KW
• 7in 1out to 20in 1out up to 4000A (500KW to 10MW)

Applications :Also We are Manufacturer of SOLAR ACDB, DCDB, Feeder Pillar, Junction Box, AJB, SJB, String monitoring unit, TVM BOX, Combiner Box, NVR Box, Metering panels, and all type of LT Panels as per Client requirements.

What is Dc distribution board?Dc distribution board combines the dc power of solar PV modules strings into single array. In Addition, combination of all strings are made pass through individual array dc fuses in shunt with DC SPD.

What is the purpose of DCDB?It is manufactured by keeping view of protection of expensive inverters from the direct and indirect lightening surges travelling from solar panels through its connected cables.

How DCDB is made?

• DCDB comes with the combination package of DC fuses, surge protection device(SPD), DC MCB/Isolators. Also Accu Panels DCDB are dust, vermin and waterproof are made out of polycarbonate enclosures. PG plastic glands and MC4 connectors gives provision of suitable cable entry and exit points of appropriate sizes of incoming and also outgoing cables.
• We deliver quality driven Dc distribution board DCDB across India and satisfied IEC-61439-1 standard hence became trust of reputed solar power manufacturer.

Protection LevelFirstly, all indoor panels have protected with IP54 or better even more all outdoor panels have protected with IP65 or better. Secondly, all PCC Panels made by laser cutting CRCA sheet and powder coating with 7-Tank process. In addition, Accu-panels have provided IP65 certificates for Dc distribution board.

What’s new?Accu Panels have developed a new product with reverse blocking diodes used in conjunction with respective array strings to protect from such loss. Also we providing more expensive solar dcdb for power plant. In conclusion, there are many reason to buy the product from us.

Features :

• Accu Panels Solar DCDB satisfies IEC-61439-1 and mandatory by MNRE and  operates upto 1000Vdc.
• The enclosure provides IP65 protection.
• Complete electrical safety to avoid hazard.
• Ferraz Mersen/Eaton DC Fuses to prevent overloads.
• Reverse blocking diodes for reverse current flow protection.
• User freindly DC termination and decent cable management.
• Easy cable plug-in and plug-out provision for cable connection.
• Wall mounting design for easy installation and maintenance.

StructureAll the Panel’s with metal clad, totally enclosed, rigid, floor mounted, air -insulated, cubical type suitable for operation on three phase / single phase, 415 or 230 volts, 50 Hz. Power control center panel have designed for minimum expected ambient temperature of 45 degrees Celsius. Also 80 percent humidity and dusty weather.

Our Main Solar DC Products :

• 1in 1out DCDB
• 2in 2out DCDB
• 4in 4out DCDB
• 8in 8out DCDB
• 10in 10out DCDB

Application :

• Using in Solar Power Plat, Rooftop power plant, Solar plant, Renewable energy Source and many type of solar power plants. Also using for LT power distribution in electricity.
• Accu-panels focus the product and services delivery to industries such as solar power plant, Utilities of industries, Manufacturing plants, Mining and ball mills, Food Beverage, Marine, Construction and Other industries that require a reliable partner for cost effective solution for electrical panels.

We are the main supplier of this product.

We are the main supplier of this product.

We are the main supplier of this product.

We are the main supplier of this product.

Definition

Auto Change over Panel using by controlling DG START / STOP sequence in accordance to the availability of utility power supply. Also We design & manufacture the AMF panels for various capacity & different make of Diesel EA set. In Conclusion, Being a quality centric organisation, So our entire range of panels is assembled as per industrial quality regulatory norms and conditions.

Standards

All switches and the circuit breakers, connectors should conform to IEC60947, part I, II and III/ IS 60947 part I, II and III by accu panels. Also Electrical standards followed include Indian and international standards like IS 8623, IEC 60529.

Protection Level

Firstly, all indoor panels have protection of IP54 or better even more all outdoor panels have protected with IP65 or better. Secondly, all PCC Panels made by laser cutting CRCA sheet and powder coating with 7-Tank process.

Features :

• Firstly Safe.
• Secondly Durable.
• Thirdly High performance.
• Also Sturdy construction.
• Finally Corrosion resistance.
• Auto/Manual Selector available.
• Auto delay in start of genset.
• Genset stop with delay of 3 minutes.
• Hooter-alarm annunciation for fail to start.
• Checklist to find the fault and to correct.
• 4st switch control for healthy start and stop for genset.
• Manual Start & Stop Switch.
• Emergency Stop switch also available.

Application

Feeder Pillar is an enclosure cum distribution board for electrical equipment or busbar, mounted in the street and various junctions. They provide local isolation from electrical distribution systems. In conclusion, Accu-panels provide IP54, IP55 and IP65 level of protection against dust and water as per client specifications.

FunctionsDistribute the supply of electrical energy from a transformer or solar power and distribute it to load that are main function of mini feeder pillars via busbar and cable. In effect, they are a very basic form of LT power System and solar power system.

What’s New Additionally, all pillar boxes having undergo pretreatment for Decreasing, Water rinsing & De-rusting/ Phosphating, also all electrical pillar box Painted with Powder Coated or Synthetic enamel as per the requirements. After that, seven tank process made by the painter. Similarly, Bus Bars / Internal Wiring uniform cross section and supported by SMC and DMC bases. Similarly, earthing Bus Bars running all along the Panel. In Conclusion, Mini feeder pillar are an important aspect of electrical control panels and LT panels.

Basic IntroductionFeeder pillar is an effective electrical enclosure to provide electrical services for low voltage electrical distribution applications. So mini feeder pillar is main part for all types of Electrical panel boards.

Standards IntroductionAll switches and the circuit breakers, connectors confirmed to IEC60947, part I, II and III/ IS 60947 part I, II and III. Mini feeder pillar confirmed with Electrical standards followed include Indian and international standards like IS 8623, IEC 60529.

SpecificationsThe panels have designed for minimum expected ambient temperature of 45 degrees Celsius, 80 percent humidity and dusty weather. All indoor panels have protected with IP54 or better. All outdoor panels have protected of IP65 or better.

What is solar Ac distribution board?

• All switches and the circuit breakers, connectors should conform to IEC60947, part I, II and III/ IS 60947 part I, II and III.
• Solar ACDB (Ac distribution board) is an important part of SPV system for Solar power Plant. Accu-panels is CPRI approved acdb dcdb manufacturer in india.
• It combines the output 3 phase as well as single phase AC power of  inverter placed in solar plant system into single box called ACDB (AC Distribution Board).

What kind of ACDB is made?We are making customized ACDB according to client’s specifications, such as indoor type (IP52), outdoor type (IP65), floor standing, wall mounting, stand mounting according to the client requirement. Also We provide IP67 Certificate for  Polycarbonate box and IP65 certificate for MS box

What are the Features ?

• ACDB comes with the package of protection devices such as surge protection device (SPD), MCCB/fuse/isolator/MCB. Therefore protecting the electrical circuit from travelling surges, overload and shortcircuit as well as human personnel from earth leakage fault which is fatal.
• It has an Energy meter in which you can easily to read the generated power and current generation values like current, voltage, power factor.
• The specifications and ratings of ACDB vary according to load and inverter capacity.
• We are also making provision of metering and net metering to monitor the consumption and generation of power.
• Fine ferruling, marking, dressing and lugs of internal wiring.

What ABOUT STRUCTURE?

• Accu Panels is making ACDB from 1.6mm / 2mm thick CRCA sheet steel in IP52 and IP65 enclosures as well as transparent IP65 polycarbonate enlosures for small roof top plants upto 30kW.
• We are one of the leading suppliers of the ACDB panel with customized solutions. This is not only user-friendly but also demands minimum maintenance.
• Accu Panels is manufacturing ACDB according to International Electrical standards like IS 8623, IEC 60529 as well as IP65 protection levels.

Our Solar ACDB Products :

• 1-5KW Solar ACDB (Ac Distribution Board) Standard (For single and Three Phase)
• 10-50KW Solar ACDB (Ac Distribution Board) Standard
• 50-1MW ACDB LT Panels as per Client Specifications
• 1in 1out ACDB up to 10KW
• 2in 1out ACDB up to 10KW
• 3in 1out ACDB up to 25KW
• 4in 1out ACDB up to 200KW
• 5in 1out ACDB up to 500KW
• 6in 1out ACDB up to 500KW
• 7in 1out to 20in 1out up to 4000A (500KW to 10MW)

Applications :Also We are Manufacturer of SOLAR ACDB, DCDB, Feeder Pillar, Junction Box, AJB, SJB, String monitoring unit, TVM BOX, Combiner Box, NVR Box, Metering panels, and all type of LT Panels as per Client requirements.

What is Dc distribution board?Dc distribution board combines the dc power of solar PV modules strings into single array. In Addition, combination of all strings are made pass through individual array dc fuses in shunt with DC SPD.

What is the purpose of DCDB?It is manufactured by keeping view of protection of expensive inverters from the direct and indirect lightening surges travelling from solar panels through its connected cables.

How DCDB is made?

• DCDB comes with the combination package of DC fuses, surge protection device(SPD), DC MCB/Isolators. Also Accu Panels DCDB are dust, vermin and waterproof are made out of polycarbonate enclosures. PG plastic glands and MC4 connectors gives provision of suitable cable entry and exit points of appropriate sizes of incoming and also outgoing cables.
• We deliver quality driven Dc distribution board DCDB across India and satisfied IEC-61439-1 standard hence became trust of reputed solar power manufacturer.

Protection LevelFirstly, all indoor panels have protected with IP54 or better even more all outdoor panels have protected with IP65 or better. Secondly, all PCC Panels made by laser cutting CRCA sheet and powder coating with 7-Tank process. In addition, Accu-panels have provided IP65 certificates for Dc distribution board.

What’s new?Accu Panels have developed a new product with reverse blocking diodes used in conjunction with respective array strings to protect from such loss. Also we providing more expensive solar dcdb for power plant. In conclusion, there are many reason to buy the product from us.

Features :

• Accu Panels Solar DCDB satisfies IEC-61439-1 and mandatory by MNRE and  operates upto 1000Vdc.
• The enclosure provides IP65 protection.
• Complete electrical safety to avoid hazard.
• Ferraz Mersen/Eaton DC Fuses to prevent overloads.
• Reverse blocking diodes for reverse current flow protection.
• User freindly DC termination and decent cable management.
• Easy cable plug-in and plug-out provision for cable connection.
• Wall mounting design for easy installation and maintenance.

StructureAll the Panel’s with metal clad, totally enclosed, rigid, floor mounted, air -insulated, cubical type suitable for operation on three phase / single phase, 415 or 230 volts, 50 Hz. Power control center panel have designed for minimum expected ambient temperature of 45 degrees Celsius. Also 80 percent humidity and dusty weather.

Our Main Solar DC Products :

• 1in 1out DCDB
• 2in 2out DCDB
• 4in 4out DCDB
• 8in 8out DCDB
• 10in 10out DCDB

Application :

• Using in Solar Power Plat, Rooftop power plant, Solar plant, Renewable energy Source and many type of solar power plants. Also using for LT power distribution in electricity.
• Accu-panels focus the product and services delivery to industries such as solar power plant, Utilities of industries, Manufacturing plants, Mining and ball mills, Food Beverage, Marine, Construction and Other industries that require a reliable partner for cost effective solution for electrical panels.

We are the main supplier of this product.

We are the main supplier of this product.

We are the main supplier of this product.

We are the main supplier of this product.