Autemx4 is PC based Linux system with a simplified & easy touch screen user interface with EtherCAT bus AND/OR high-speed pulse & direction output with high-speed encoder feedback.

AutemX4 is a 3 axis / 4 axis standalone CNC Controller with 10.1″ multi touch screen, machine operating panel, keypad for the value entry. It support EtherCAT as well as high speed up to 6Mhz differential pulse and direction outputs and high speed encoder feedback inputs for each axis making it close loop controller. Autem controller comes with inbuilt software PLC which can be programmed by the user configuring additional inputs and outputs using ladder programming as per user requirements. Panel mounting method for the controller give appealing look when user with heavy machines.

Touch user interface is designed with keeping in mind of operators perspective of operating the machine providing various software tools ease of work. JOG, MDI, AUTO modes with switching interface as per mode selected, 3D wire mesh toolpath simulation helps operator to see the actual job prior to start cutting and gives alarm if any machine movement is going to violate the machine boundaries. Self guided user interface helps user to setup any job easily with calculating the edge based as well as center based machine zero and job zero. MOP keypad provides various buttons for jogging individual axis and feer override switch provides control over the speed of the all axes while staring the job or in between running machine.

User space is available as per requirements in GBs which helps to store large number of programs. Drag and drop feature for file transfer over USB disks, diagnostic view helps operator debug various alarms and status of the machine. Controller supports various compensation methods to overcome the minor mechanical errors like backlash compensation, bi directional pitch error compensation using laser calibration providing accuracy in microns at the machine level.

Best suitable for VMC, HMC,   Turning Centers, Metal Engraving, Pattern-making machines, Stone cutting machine etc.

Features

• Expandable IO supported.
• Remote IO cards with 48 inputs, 32 outputs & high-speed quadrature encoder interface for spindle & secondary axes encoder.
• Power Outage Safety & No moving parts.
• User-programmable PLC with easy-to-use ladder paradigm for OEM settings.
• Timers & high-speed counters for encoder interface.
• ISO standard (rs274D)G-codes & M-codes supported.
• 2.5D onboard CAM for dxf , plt & HPGL
• Programmable base coordinate offsets

FloydCNC 4F series is 4 axes CNC controller running with Floyd Software running with 6Mhz differential pulse & direction output for smooth operation. It is using 2D DXF or Plt files. FloydCNC converts this .dxf or .plt file to GCode internally & it will run the machine accordingly.  

MeteorCNC 4F is a 4-axis CNC controller operated with pc based user interface called “Floyd” software. 4F series controller comes with 4 axis individual  jitter free differential pulse and direction, 24 digital NPN inputs, 12 digital NPN outputs, 0-10v analog output for the spindle, high speed external  encoder input and software license.

“Floyd” software can be installed in any windows 7  or windows 10 computer or Laptop with minimum specifications of the PC like 2Gb/4Gb RAM, 32GB SSD or HDD inbuilt graphics care also sufficient to run the software with 3D display. Software running inside computer communicates with control card over the lan cable. User interface has facility for inbuilt CAM generation using 2D .dxf or .plt files. Auto Centering facility provides additional ease to user to setup the job and finding the center in both X and Y direction using graphical interface.  3D view provides wire mesh interpretation of the toolpath where user can zoom in, zoom out, rotate, pan etc to view job going to go for cutting or engraving.  However, as the name indicates, 4-axis machining adds an axis of rotation to the standard X, Y, and Z movement. This extra movement is rotation along the X-axis or Y axis, which forms a fourth plane. The rotation may be accomplished by moving the tool or the workpiece which is being machined, and the axis of rotation may be parallel to or perpendicular to the tool surface.

Software also provides machine boundaries for ease of user operation and ware the user if any movement is going to violate the machine boundaries prior to the job start which helps user for unnecessary damage in tool or workpiece and saving lots of user time making him productive in the work.

Best suitable for die and mold making machine, laser machines, plasma cutting machine, multi side wood drilling and slot application etc.

Software Features

• Inbuilt CAM generation using 2D cad file like .dxf, .plt etc,
• 3D wire mesh path simulation.
• Ability to run large G-Code files with millions of lines.
• Rs274D ISO Gcode Supported.
• Advance lookahead algorithm for high feed rate control.
• Auto Centering user interface.

MeteorCNC 3H series is 3 axis CNC DSP Controller Manufacturer with handhandle running upto 500khz differential pulse & direction output for smooth operation with 15 Inputs, 8 Outputs & 1 Analog output.

MeteorCNC 3M is 3 axis CNC controller comes with control card and operated with handheld with 128×64 graphics LCD,   Easy to learn and user-friendly UI comes with blue and white color combination which gives an appealing look to the user.

Easy to setup and configure any 3 axis CNC machine with inbuilt MPG that provides ease of operation for job setup. Setting backup option also available using pen drive and network connectivity facility for remote debugging and program transfer facility using lan cable with and option for handheld cables length upto 50 Mtrs as per user requirements.

The 3M series  Controller provides at up to 500 kHz jitter free differential pulse and direction output, making it ideal for smooth motion at the motor end and precision work. When the job at hand doesn’t call for a lot of depth or detail, a machine with only three axes will do just fine. That’s why it’s one of the most popular methods for making mechanical components for robotics and other forms of automation and specially for wood working market and interior industries.

You may also use it for boring, milling slots, tapping, and drilling holes in addition to cutting sharp edges.

Features

• The file can be transferred by using USB as well as over the network.
• Position of axis & line number will be store on power off.
• Providing a total of 9 work co-ordinate systems.
• Supporting ISO Standards rs274d G codes & M codes.
• Velocity & Acceleration management for each axis & overall path basis.
• Inbuilt  MPG is available on handhandle.

Applications

• Metal Engraving
• Wood Carving.
• Stone cutting.
• Die making.

MeteorCNC 4H series is 4 axes CNC router controller manufacturer with handheld running upto 500khz differential pulse & direction output for smooth operation with 24 Inputs, 12 Outputs, 1 Analog output and encoder facility available.

MeteorCNC 4H series is a 4 axes CNC router controller operated with handheld provides up to 500khz jitter free differential pulse & direction output for smooth motion at the motor end. It comes with 4 axis control card and handheld and inbuilt MPG available with few extra inputs and outputs with additional facility of external high speed differential encoder input which can be used for either MPG remote for jogging of axis OR spindle encoder feedback for tapping cycle.

A 4-axes CNC machine functions much like its 3-axes counterpart. With addition of one extra rotational motion from the controller makes it very special for making critical works. The workpiece is in a stationary position, and the cutting tool works on it to remove material and mold the desired part. However, as the name indicates, 4-axis machining adds an axis of rotation to the standard X, Y, and Z movement. This extra movement is rotation along the X-axis, which forms a fourth plane the A-axis OR rotational along Y-axis. The rotation may be accomplished by moving the tool or the workpiece which is being machined, and the axis of rotation may be parallel to or perpendicular to the tool surface. The orientation of the axis of rotation determines how easy it is to machine certain features and undercuts on a given machine.

4 individual simultaneously running axis machine is majorly used in wood working / router machine industries for making statues, stone cutting/ engraving machine for pillar making etc.  making the job faster and easier for the users.

Features

• 4 individual running axis without compromising another axis.
• The file can be transferred by using USB as well as over the network via lan cable.
• Position of axis & line number will be store on power off.
• Providing a total of 9 work co-ordinate systems.
• Supporting ISO Standards rs274d G-codes & M-codes.
• Velocity & Acceleration management for each axis & overall path basis.
• Exteranl high speed differential encoder input for MPG or Spindle encoder for tapping.

Applications

• Statue making
• Stone cutting.
• Stone Pillar engraving.
• Rotary Carving.

Autemx4 is PC based Linux system with a simplified & easy touch screen user interface with EtherCAT bus AND/OR high-speed pulse & direction output with high-speed encoder feedback.

AutemX4 is a 3 axis / 4 axis standalone CNC Controller with 10.1″ multi touch screen, machine operating panel, keypad for the value entry. It support EtherCAT as well as high speed up to 6Mhz differential pulse and direction outputs and high speed encoder feedback inputs for each axis making it close loop controller. Autem controller comes with inbuilt software PLC which can be programmed by the user configuring additional inputs and outputs using ladder programming as per user requirements. Panel mounting method for the controller give appealing look when user with heavy machines.

Touch user interface is designed with keeping in mind of operators perspective of operating the machine providing various software tools ease of work. JOG, MDI, AUTO modes with switching interface as per mode selected, 3D wire mesh toolpath simulation helps operator to see the actual job prior to start cutting and gives alarm if any machine movement is going to violate the machine boundaries. Self guided user interface helps user to setup any job easily with calculating the edge based as well as center based machine zero and job zero. MOP keypad provides various buttons for jogging individual axis and feer override switch provides control over the speed of the all axes while staring the job or in between running machine.

User space is available as per requirements in GBs which helps to store large number of programs. Drag and drop feature for file transfer over USB disks, diagnostic view helps operator debug various alarms and status of the machine. Controller supports various compensation methods to overcome the minor mechanical errors like backlash compensation, bi directional pitch error compensation using laser calibration providing accuracy in microns at the machine level.

Best suitable for VMC, HMC,   Turning Centers, Metal Engraving, Pattern-making machines, Stone cutting machine etc.

Features

• Expandable IO supported.
• Remote IO cards with 48 inputs, 32 outputs & high-speed quadrature encoder interface for spindle & secondary axes encoder.
• Power Outage Safety & No moving parts.
• User-programmable PLC with easy-to-use ladder paradigm for OEM settings.
• Timers & high-speed counters for encoder interface.
• ISO standard (rs274D)G-codes & M-codes supported.
• 2.5D onboard CAM for dxf , plt & HPGL
• Programmable base coordinate offsets

FloydCNC 4F series is 4 axes CNC controller running with Floyd Software running with 6Mhz differential pulse & direction output for smooth operation. It is using 2D DXF or Plt files. FloydCNC converts this .dxf or .plt file to GCode internally & it will run the machine accordingly.  

MeteorCNC 4F is a 4-axis CNC controller operated with pc based user interface called “Floyd” software. 4F series controller comes with 4 axis individual  jitter free differential pulse and direction, 24 digital NPN inputs, 12 digital NPN outputs, 0-10v analog output for the spindle, high speed external  encoder input and software license.

“Floyd” software can be installed in any windows 7  or windows 10 computer or Laptop with minimum specifications of the PC like 2Gb/4Gb RAM, 32GB SSD or HDD inbuilt graphics care also sufficient to run the software with 3D display. Software running inside computer communicates with control card over the lan cable. User interface has facility for inbuilt CAM generation using 2D .dxf or .plt files. Auto Centering facility provides additional ease to user to setup the job and finding the center in both X and Y direction using graphical interface.  3D view provides wire mesh interpretation of the toolpath where user can zoom in, zoom out, rotate, pan etc to view job going to go for cutting or engraving.  However, as the name indicates, 4-axis machining adds an axis of rotation to the standard X, Y, and Z movement. This extra movement is rotation along the X-axis or Y axis, which forms a fourth plane. The rotation may be accomplished by moving the tool or the workpiece which is being machined, and the axis of rotation may be parallel to or perpendicular to the tool surface.

Software also provides machine boundaries for ease of user operation and ware the user if any movement is going to violate the machine boundaries prior to the job start which helps user for unnecessary damage in tool or workpiece and saving lots of user time making him productive in the work.

Best suitable for die and mold making machine, laser machines, plasma cutting machine, multi side wood drilling and slot application etc.

Software Features

• Inbuilt CAM generation using 2D cad file like .dxf, .plt etc,
• 3D wire mesh path simulation.
• Ability to run large G-Code files with millions of lines.
• Rs274D ISO Gcode Supported.
• Advance lookahead algorithm for high feed rate control.
• Auto Centering user interface.

MeteorCNC 3H series is 3 axis CNC DSP Controller Manufacturer with handhandle running upto 500khz differential pulse & direction output for smooth operation with 15 Inputs, 8 Outputs & 1 Analog output.

MeteorCNC 3M is 3 axis CNC controller comes with control card and operated with handheld with 128×64 graphics LCD,   Easy to learn and user-friendly UI comes with blue and white color combination which gives an appealing look to the user.

Easy to setup and configure any 3 axis CNC machine with inbuilt MPG that provides ease of operation for job setup. Setting backup option also available using pen drive and network connectivity facility for remote debugging and program transfer facility using lan cable with and option for handheld cables length upto 50 Mtrs as per user requirements.

The 3M series  Controller provides at up to 500 kHz jitter free differential pulse and direction output, making it ideal for smooth motion at the motor end and precision work. When the job at hand doesn’t call for a lot of depth or detail, a machine with only three axes will do just fine. That’s why it’s one of the most popular methods for making mechanical components for robotics and other forms of automation and specially for wood working market and interior industries.

You may also use it for boring, milling slots, tapping, and drilling holes in addition to cutting sharp edges.

Features

• The file can be transferred by using USB as well as over the network.
• Position of axis & line number will be store on power off.
• Providing a total of 9 work co-ordinate systems.
• Supporting ISO Standards rs274d G codes & M codes.
• Velocity & Acceleration management for each axis & overall path basis.
• Inbuilt  MPG is available on handhandle.

Applications

• Metal Engraving
• Wood Carving.
• Stone cutting.
• Die making.

MeteorCNC 4H series is 4 axes CNC router controller manufacturer with handheld running upto 500khz differential pulse & direction output for smooth operation with 24 Inputs, 12 Outputs, 1 Analog output and encoder facility available.

MeteorCNC 4H series is a 4 axes CNC router controller operated with handheld provides up to 500khz jitter free differential pulse & direction output for smooth motion at the motor end. It comes with 4 axis control card and handheld and inbuilt MPG available with few extra inputs and outputs with additional facility of external high speed differential encoder input which can be used for either MPG remote for jogging of axis OR spindle encoder feedback for tapping cycle.

A 4-axes CNC machine functions much like its 3-axes counterpart. With addition of one extra rotational motion from the controller makes it very special for making critical works. The workpiece is in a stationary position, and the cutting tool works on it to remove material and mold the desired part. However, as the name indicates, 4-axis machining adds an axis of rotation to the standard X, Y, and Z movement. This extra movement is rotation along the X-axis, which forms a fourth plane the A-axis OR rotational along Y-axis. The rotation may be accomplished by moving the tool or the workpiece which is being machined, and the axis of rotation may be parallel to or perpendicular to the tool surface. The orientation of the axis of rotation determines how easy it is to machine certain features and undercuts on a given machine.

4 individual simultaneously running axis machine is majorly used in wood working / router machine industries for making statues, stone cutting/ engraving machine for pillar making etc.  making the job faster and easier for the users.

Features

• 4 individual running axis without compromising another axis.
• The file can be transferred by using USB as well as over the network via lan cable.
• Position of axis & line number will be store on power off.
• Providing a total of 9 work co-ordinate systems.
• Supporting ISO Standards rs274d G-codes & M-codes.
• Velocity & Acceleration management for each axis & overall path basis.
• Exteranl high speed differential encoder input for MPG or Spindle encoder for tapping.

Applications

• Statue making
• Stone cutting.
• Stone Pillar engraving.
• Rotary Carving.