Write a Review
Our Products
Our Complete range of products are Carbide Insert Tool Holders, Tool Holders , Boring Bars, Parting Tool Holder, Turning Tool Holder and Tapping Chuck.
One Piece construction with 100% Clamping power.Can be used both on Front and Rear Tool Post of the Cross Line.Holds and guides the Beveled blade in a way that it ensures equalclearance on both sides.Supplied with and without HSS / Cobalt Cut Off Blades.Blade also available seperately.Provided with allen Keys.
|
Item Code No. |
Blade Size |
Body Size |
|
Shank x Width x Length |
||
|
ABM-IMT-6580 |
3/32 x 3/8 x 4 |
2-1/8 x 15/16 x 1 |
|
ABM-IMT-6581 |
3/32 x 1/2 x 4 |
2-1/8 x 1-3/16 x 1-1/8 |
|
ABM-IMT-6582 |
3/32 x 5/8 x 4 |
3-1/2 x 1-1/2 x 1-7/16 |
|
ABM-IMT-6583 |
1/8 x 3/4 x 5 |
3-1/2 x 1-1/2 x 1-1/4 |
Knurls are Hob Cut from High Speed Steel and Heat Treated.Six knurls tools is provided with one pair each of fine medium and coarseknurls.Two knurls Tool is generally provided with medium knurls butother knurls can also be provided if required.Machined ground steel in Shiny Black Finish.Replacement knurls are offered as a complete spare set forknurling Tools.
|
Item Code No. |
Size of Holders |
Knurling Dimension |
No of |
||
|
Dia. |
Thick |
Holes |
|||
|
Single |
|||||
|
ABM-IMT-6530 |
1/2 x 1/2 x 4 |
3/4" |
1/4" |
1/4" |
1 |
|
Self Adjusting |
|||||
|
ABM-IMT-6531 |
5/16 x 3/4 x 5 |
5/8" |
5/16" |
7/32" |
2 |
|
ABM-IMT-6532 |
3/8 x 7/8 x 5-1/2 |
5/8" |
5/16" |
7/32" |
2 |
|
ABM-IMT-6533 |
1/2 x 1-1/8 x 6-1/2 |
3/4" |
3/8" |
1/4" |
2 |
|
ABM-IMT-6534 |
5/8 x 1-3/8 x 7-1/2 |
3/4" |
3/8" |
1/4" |
2 |
|
Revolving |
|||||
|
ABM-IMT-6535 |
5/16 x 3/4 x 5 |
5/8" |
5/16" |
7/32" |
6 |
|
ABM-IMT-6536 |
3/8 x 7/8 x 5-1/2 |
5/8" |
5/16" |
7/32" |
6 |
|
ABM-IMT-6537 |
1/2 x 1-1/8 x 6-1/2 |
3/4" |
3/8" |
1/4" |
6 |
|
ABM-IMT-6538 |
5/8 x 1-3/8 x 7-1/2 |
3/4" |
3/8" |
1/4" |
6 |
|
ABM-IMT-6539 |
1/2 x 7/8 x 6-1/2 |
3/4" |
3/8" |
1/4" |
6 |
|
Pivot Head Self Adjust |
|||||
|
ABM-IMT-6540 |
1/2 x 1/2 x 4-1/2 |
3/4” |
3/8” |
1/4” |
2 |
External Tool Holders (Top Clamp)
CSBPR/L 75 Approach.For 11 Positive Square Inserts
|
Item Code No. |
As Per ISO Designation |
Suitable Inserts |
|
ABM-IMT-6400 |
CKNJR 2525M 16 |
KN_X |
|
ABM-IMT-6401 |
CKJNL 2525M 16 |
KN_X |
|
ABM-IMT-6402 |
CKJNR 3225P 16 |
KN_X |
|
ABM-IMT-6403 |
CKJNL 3225P 16 |
KN_X |
Indexable Carbide Turning Tool Holder
Versatile of Cutting in any direction.Built in Chip Breaker GrooverReady to Use. No Grinding. No Tool Resetting.Economical alternative to Brazed Tool Tip.Supplied with and without Tool Bits.
|
Item Code No. |
Size of Square Shank |
Style |
|
ABM-IMT-6230 |
3/8” |
TE-6 |
|
ABM-IMT-6231 |
3/8” |
TBL-6 |
|
ABM-IMT-6232 |
3/8” |
TAL-6 |
|
ABM-IMT-6233 |
3/8” |
TBR-6 |
|
ABM-IMT-6234 |
3/8” |
TAR-6 |
|
ABM-IMT-6235 |
Set of Five Holders with 3/8” shank |
|
|
ABM-IMT-6236 |
1/2” |
TE-8 |
|
ABM-IMT-6237 |
1/2” |
TBL-8 |
|
ABM-IMT-6238 |
1/2” |
TAL-8 |
|
ABM-IMT-6239 |
1/2” |
TBR-8 |
|
ABM-IMT-6240 |
1/2” |
TAR-8 |
|
ABM-IMT-6241 |
Set of Five Holders with 1/2” shank |
|
|
ABM-IMT-6242 |
5/8” |
TE-10 |
|
ABM-IMT-6243 |
5/8” |
TBL-10 |
|
ABM-IMT-6244 |
5/8” |
TAL-10 |
|
ABM-IMT-6245 |
5/8” |
TBR-10 |
|
ABM-IMT-6246 |
5/8” |
TAR-10 |
|
ABM-IMT-6247 |
Set of Five Holders with 5/8” shank |
|
|
ABM-IMT-6248 |
3/4” |
TE-12 |
|
ABM-IMT-6249 |
3/4” |
TBL-12 |
|
ABM-IMT-6250 |
3/4” |
TAL-12 |
|
ABM-IMT-6251 |
3/4” |
TBR-12 |
|
ABM-IMT-6252 |
3/4” |
TAR-12 |
|
ABM-IMT-6253 |
Set of Five Holders with 3/4” shank |
|
|
ABM-IMT-6254 |
1” |
TE-16 |
|
ABM-IMT-6255 |
1” |
TBL-16 |
|
ABM-IMT-6256 |
1” |
TAL-16 |
|
ABM-IMT-6257 |
1” |
TBR-16 |
|
ABM-IMT-6258 |
1” |
TAR-16 |
|
ABM-IMT-6259 |
Set of Five Holders with 1” shank |
|
Boring Tool Holders (Lever Lock)
PCLNR/L 95 Approach.For negative 80 Rhombic Inserts.
|
Item Code No. |
As Per ISO Designation |
Suitable Inserts |
|
ABM-IMT-6120 |
S25T PCLNR 12 |
CN_A, CN_G & CN_M |
|
ABM-IMT-6121 |
S25T PCLNL 12 |
CN_A, CN_G & CN_M |
|
ABM-IMT-6122 |
S32U PCLNR 12 |
CN_A, CN_G & CN_M |
|
ABM-IMT-6123 |
S32U PCLNL 12 |
CN_A, CN_G & CN_M |
|
ABM-IMT-6124 |
S40V PCLNR 12 |
CN_A, CN_G & CN_M |
|
ABM-IMT-6125 |
S40V PCLNL 12 |
CN_A, CN_G & CN_M |
|
ABM-IMT-6126 |
S50W PCLNR 16 |
CN_A, CN_G & CN_M |
|
ABM-IMT-6127 |
S50W PCLNL 16 |
CN_A, CN_G & CN_M |
|
ABM-IMT-6128 |
S50W PCLNR 19 |
CN_A, CN_G & CN_M |
Double ended knurling Tool Holder HSS knurls Straight, Fine and Medium.
|
Item Code No. |
Holder Size |
Size of knurls |
Knurl Pattern |
||
|
Inch |
mm |
Inch |
mm |
||
|
ABM-IMT-6560 |
1/2 x 1/2 x 5 |
12.7 x 12.7 x 125 |
3/4 x 1/4 x 1/4 |
19 x 6.35 x 6.35 |
Fine & Medium |
Accurately Machined.Heat Treated & Hardened.Provided with one Wrench.Supplied with and without Tool Bits.Available in ST (Straight), LT (Left) and RT (Right) Hand Shanks.Please specify ST, LT or RT with order.
|
Item Code No. |
Size of Holder |
Size of Cutter |
|
ABM-IMT-6690 |
7/16" x 9/4" x 4-1/2" |
1/8" |
|
ABM-IMT-6691 |
1/2" x 9/16" x 4-1/2" |
3/16" |
|
ABM-IMT-6692 |
5/8" x 3/4" x 7-1/2" |
1/4" |
|
ABM-IMT-6693 |
3/4" x 7/8" x 8-1/2" |
5/16" |
|
ABM-IMT-6694 |
7/8" x 1" x 9-1/2" |
3/8" |
|
ABM-IMT-6695 |
1" x 1-1/8" x 10-1/2" |
7/16" |
|
ABM-IMT-6696 |
1-1/8" x 1-1/4" x 11-1/2" |
1/2" |
|
Please specify ST, LT or RT while placing order |
||
Abm Tools (Abm Tools)
79A, Pocket GG-1, Vikas Puri, Delhi - 110018, India
Share us via
