Our Products
FEATURES These cold heading machines are fully automatic and easy to operate with little training, fitted with Solid Die to produce blank for Bolts, Screws, Rivets and other similar components. Cut off and knock out mechanism have safely devices that will stop any major accident if any abnormal function occurs in machines.
A positive knock out provision had been made on the 1st and 2nd punches to eliminate the possibility of parts sticking to these punches during the operations. The maximum parts of the machines are ground and all the Cames and Rollers from H.C.H.C. ( Hardened & Ground ).
On some extra charges machines will be equipped with Pneumatic Clutch & Automatic Centralized Lubrications systems which provides sufficient quantity lubricating to all bearing surface.
FEATURES
Hot Forgings.
Investment costs low & Cost for foundations are minimal.
The forging Dies have a long life.
Costs of development, manufacturer & replacement of the dies are low.
Great forging accuracy is achieved because of the free stroke.
Additional energy can be applied to the same die impression by making several blows.
The heat contact time considerably less than it with crank type forging presses & knuckle joint presses.
Cost of repairs after years of hard usage is low. Only skilled labor should be employed for its usage.
Forging presses are an answer for the forging of Round, Square and Hexagonal headed bolts as well as for nuts, rivets, Motor Parts, Cycle Parts and variety of such other items.
These presses are very simple in operation and their strokes can be achieved depressing a lever provided on the left hand column on the front of the press.
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
FEATURES
ABM Tools Automatic Screw Head Slotting Machines have been developed for fast & economic slotting of big quantities of screws in current dimensions.
Advantages for the industry.
Automatic sequence of operation
Minimum set-up time.
Low cost.
High efficiency
Item Code No. |
Length of Screw |
Dia. of Screw |
Production |
Motor H.P. |
ABM-FM-6490 |
1" (6 mm - 25 mm) |
1/8" (2 mm - 3 mm) |
90 - 110 Pcs. |
1 x 1400 |
ABM-FM-6491 |
1-1/2" (8 mm - 40 mm) |
3/16" (3 mm - 5 mm) |
90 - 100 Pcs. |
1 x 1400 |
ABM-FM-6492 |
2" (12 mm - 50 mm) |
1/4" (4 mm - 6 mm) |
80 - 90 Pcs. |
2 x 1400 |
ABM-FM-6493 |
2-1/2" (25 mm - 65 mm) |
5/16" (5 mm - 8 mm) |
70 - 80 Pcs. |
2 x 1400 |
ABM-FM-6494 |
3" (40 mm - 75 mm) |
3/8" (6 mm - 10 mm) |
50 - 60 Pcs. |
3 x 1400 |