Our Products
Hanging Hooks
2 Products availableBlankets
2 Products availableAdventure Sporting & Trekking Goods
2 Products availableWe offer a complete product range of Hydrofit Rubber Mat, Hydrofit Foodgrade Rubber Mat, Basic Eye Protection, Anti-Fog Coating Eye Protection and Face Shield Carrier
The elastic texture and the curved nubs of the Werkstep workplace anti fatigue esd mats reduce the load on bones, joints and musculature. Pressure on the sensitive toe and ankle area is considerably reduced since the Werkstep anti fatigue ergonomic mat cushions the weight. Imperceptibly, the feet are always in motion which in turn stimulates blood circulation. The Werkstep anti slip, ergonomic mats stimulates the blood circulation in the legs, you stand permanently comfortable and relaxed.
The elastic texture and the curved nubs of the Werkstep workplace anti fatigue esd mats reduce the load on bones, joints and musculature. Pressure on the sensitive toe and ankle area is considerably reduced since the Werkstep anti fatigue ergonomic mat cushions the weight. Imperceptibly, the feet are always in motion which in turn stimulates blood circulation. The Werkstep anti slip, ergonomic mats stimulates the blood circulation in the legs, you stand permanently comfortable and relaxed.
The elastic texture and the curved nubs of the Werkstep workplace anti fatigue esd mats reduce the load on bones, joints and musculature. Pressure on the sensitive toe and ankle area is considerably reduced since the Werkstep anti fatigue ergonomic mat cushions the weight. Imperceptibly, the feet are always in motion which in turn stimulates blood circulation. The Werkstep anti slip, ergonomic mats stimulates the blood circulation in the legs, you stand permanently comfortable and relaxed.
Material: HDPE
Suspension:
1. 4 point plastic/textile cradle with fixed ratchet mechanism.2. HDPE based headband & cradle3. Chin strap:Adjustable4. Size : 51 - 62 cm.5. Sweet bank: Breathable cloth
Standard: Conforms to IS 2925 and EN 397.
Lightweight ear muff to filter hazardous noise.
No exposure of metal parts.
Adjustable ear - cups.
Soft foam - filled cushions and large ear cup openings to provide greater protection and comfort.
Specially designed low pressure headbands for long duration use.
NRR 23 dB.
Two positioned temple width adjustment.
Co-polymer soft nose piece.
Lightweight, flexible, stylish and sporty looking safety eyewear.
Polycarbonate 9.5 base dual clear lens.
Lenses are impact resistant to level F.
Lenses are optical Class-1.
Scratch-resistant coating on lens.
99.9% UV protection.
Meets or exceeds EN 166:2001 with CE marked.
Meets high Impact requirements of ANSI Z87.1-2003.
Unique design for unrestricted vision with adjustable soft temple.
Soft nose pads for universal fit.
Light mirror coated lens for outdoor/indoor application.
Anti-fog coating.
Lenses are impact resistant to level F.
Scratch-resistant coating on lens.
Optical Class-1.
99.9% UV protection.
Meets or exceeds EN 166:2001 with CE marked.
Meets high Impact requirements of ANSI Z87.1-2003.
Frame: Non-allergic soft co-polymer for pressure free long duration use.
Impact Protection: Tested and certified to impact protection as per EN166 to Level B confirming against medium energy impact of 120 metres/sec [402 km/hour].
Head-band: Soft elasticated with locking clips.
Marking: EN166 B CE.
Lens:1. Material - Polycarbonate.2. Filter - Light filter of 2-1.2 according to EN 170.3. Coating - Scratch-resistant coating and anti-fog coating on both sides.4. Impact protection - Tested and certified as per EN166 to Level B.5. UV protection - 99.99%.6. Optical class - Class-I as per as per EN166.
Marking: 2-1, 2 U 1B kN CE
Standard:1. Meets or exceeds EN 166:2001 with CE marking.2. Meets high impact Requirements of ANSI Z87.1-2010
Protections against high-speed impact i.e. B level (120 m/s) at extreme temperature, penetration, splash of liquids and heat. Best optical quality (highest ranking at the tests of spherical refractive power, astigmatic refractive power, prismatic refractive power, and light diffusion. Protective films on both sides (prevent damages and scratches during transportation). Complies with CE EN166, EN170, ANSI Z87+.
Welding face shield
Designed to worn with udyogi vented Helmets ( Vista, Fusion & Ultravent)
Flip type front window with clear and DIN glass
As per EN standard
Material: High impact resistance ABS.Colour: Orange.
Anchor Point: One dorsal D-ring, Two chest attachment textile loop, One ventral loop, Two lateral D-ring.
Special features:
Multipurpose harness, ideal for professional use and rescue One external attachment point for rescue & descending Ergonomic Horizontal H-shaped thigh straps
1. Facilitate vertical and horizontal movements.
2. No discomfort or pressure on the groin.
3. Improved comfort in case of a fall.
Breathable open-core padding for extra comfort in the back and thigh Automatic buckle for quick adjustment Easy no-tangle donning
Materials:
Fray-proof dope-dyed polyester webbing
Metal quick buckles of high strength alloy steel.
Stitching: High-strength polyester computer-controlled stitching ensures consistency.
Adjustability: Size adjustment straps at shoulder, waist and thighs.
Standard: Conforms to EN 361, EN 358 and EN 813.
With one side eye loop and other side EASY 308 karabiner.
Class-A connectors are connectors used for specific type of anchors.
Class-M connectors are for general use which may be loaded on either the major or minor axis.
It is important to note the safe working load for a major and minor axis of a connector (as per manufacturers instructions and recommendations).
Class-T connectors come with a captive eye.
Webbing type retractable fall arrester.
Compact and lightweight.
30 mm wide webbing.
With shock absorber and snap hook.
Swivel steel snap hook with fall indicator.
Maximum load capacity 100 kg.
Conforms to EN 360:2002.
Portable, Light weight anchorage connector designed for fall arrest application.
Manufactured of Galvanized steel, so it is strong and built to last.
Non-penetrating design does not penetrate the working surface reducing the possibility of damage.
Adjustment ranges upto 450 mm
Weight: 8 kg approx
Ultimate breaking strength 35 kN / 7608 lbs
Confirms to EN 795 Class 1
Specially developed for stationary use in safety and rescue cases for two persons as well as for lifting and lowering loads.
Removable extension arm & adjustable height.
Suitable for fast relocation.
V2A stainless steel design
Stable thanks to solid construction & high quality.
Height 1.8 m, cantilever reach 1.25 m
Safe Working Load Limit up to 300 kg with max 20m rope length
Portable Device for Confined Space - Entry and Retrieval
Height adjustments: From 1.45m to 2.15m.
Material: High-strength Aluminum Alloy.
Strength: 22 kN.
Safe Working Load Limit 200 kgf.
Conforms to EN 795 - Class-B.
Auto-locking system at the head to ensure stability of the legs.
Adjustable telescoping legs: Easy pin style adjustment allowing precise height setting.
Built-in anchor point: Eye bolt offers secondary anchor point for fall arrest system
Anti-skid rubber foot-pads and safety straps prevent legs from spreading apart.
Mobile Anchor with dynamic adjustability
Fixing Range: Beam size from 130 mm to 330 mm.
Materials: Aluminum Alloy with anodized finish.
Strength: 15 kN.
Weight: 4.715 kg.
Safe Working Load Limit 200 kgf.
It can be installed in any orientation (vertical or horizontal) with fixing arrangement using a built-in adjustment system.
Dual beam grip adjustment prevents twisting and turning.
Integral D-ring provides an anchorage connection point for shock absorbing and self-retracting lanyards.
Conforms to EN 795 - Class-A & B
Sliding Mobile Anchor for horizontal movements
Fixing Range: Beam size from 75 mm to 300 mm.
Materials: High-strength Aluminum Alloy.
Strength: 15 kN.
Weight: 2.360kg.
Safe Working Load Limit 200 kgf.
Dual beam grip adjustment prevents twisting and turning.
Integral D-ring provides an anchorage connection point for shock absorbing and self-retracting lanyards.
Conforms to EN 795 - Class-B.
Rolling Beam Anchor for horizontal mobility.
Fixing Range: Beam size from 75 mm to 300 mm.
Materials: High-strength Aluminum Alloy.
Strength: 15 kN.
Weight: 3.535 kg.
Safe Working Load Limit 200 kgf.
Conforms to EN 795 - Class-B.
Glides effortlessly along the beam and provides horizontal mobility.
Attachable anywhere along the beam and provides horizontal mobility.
Integral D-ring provides an anchorage connection point for shock absorbing and self-retracting lanyards.
Tie of Anchor slings made of polyester
Conforms to EN 795 Class-B.
Anchor slings made of 44 mm polyester webbing.
Conforms to EN 795 Class-B.
D-rings at both end.
Made of 8 mm Stainless Steel grade 304
Loops at both ends.
Conforms to EN 795 Class-B.
Webbing: Fray-proof, dope-dyed polyester webbing
Ratchet: Steel, zinc coated, rated to 50 kN
Lifeline Length: 20 metres
Strength: 15 kN
Conforms to EN 795 - Class-B
The Edge Auto Descender is a self-rescue equipment by means of which, one or more persons (one after the other) can be lowered at a controlled speed. Its one of the lightest automatic escape devices in the world.
Ready-to-use evacuation kit.
Automatic self descender, descent speed range: 0.80-1.50m/sec.
Works on 11 mm dia kermental rope.
Available rope length 30m, 50m, 100m.
Maximum Load Capacity: 150kg.
Minimum Load: 20kg.
Housing: Cast aluminium.
Housing Cover: Stainless steel.
Equipped with standard karabiner.
Certified to EN 341 CLASS-A.
A manually operated, controlled descent device most commonly used for suspended work positioning, self evacuation or rescue operations.
With double stop designed for anti-panic auto braking system.
Immediate blocks on clutching or releasing the devices.
Works on 10.5 - 11 mm Braided Rope.
Maximum working load is 150 kg.
Conforms to EN 341 - Class-A.
Ascender handle are mechanical devices that attach onto a climbing rope and allow a climber to ascend the rope.
Lower holes for connecting lanyard and installing foot loop with a standard karabiner.
Upper hole through which a karabiner attaches the device to the rope (useful for back-up belays or hauling).
Works on 10.5 - 11 mm braided rope.
Plastic mould for better handling and isolating protection prevents the ascender from accidentally coming off the rope.
Conforms to EN 567.
A simple and efficient system for rope access use.
Used as an ascender or positioning device.
Designed as an abseil protection device.
Works on 10.5 11 mm Braided Rope.
Ergonomic low profile release catch allows single-handed operation.
Safety catch prevents the cam from opening too far, thus helping to keep the rope captured for added safety.
Conforms to EN 567.
Heavy duty rope with low elongation and high static strength, intended primarily for work at height and rescue in care of a full.
Braided Safety Net.
Mesh size: 30 mm X 30 mm.
Mesh rope: 2.5 mm dia single braided rope.
Border rope: 12 mm dia PP rope.
Tie rope: 12 mm dia PP rope of 2 metres length at every 1.5 metre interval.
ISI marked polypropylene rope conforming to IS: 5175 of 1992.
Guided type fall arrester.
Made of alloy steel.
In built gravity lock to avoid incorrect use.
In event of fall quickly grips the rope.
Detachable from rope.
Works on 14 mm dia polyamide rope.
Conforms to EN 353-2.
Apron: One-Piece aluminised bid type back open
Application: These are extensively used for protection from height metal splash, Welding among others make of aluminised glass fiber or aluminised kevlar fiber.
Long Coat: One-piece aluminised coat
One pair of aluminised gloves.
Application : These are extensively used for protection from heat, metal splash, welding among others.
The outer layer is make from Aluminised with para aramid material.
Fabric Weight: 480 GSM
Warp: 2700 N, Weft : 1700 N
Application : These are extensively used for thermal, radiant and convective heat protection.
Construction: The coat can be customised and companys logo can be embroidered.
Style:
1. One-piece coverall.
2. Jacket and trouser.
Accessories:
1. One pair of Kevlar gloves.
2. One pair of Kevlar leg-guard.
100% Kevlar fabric.
BIB type back open with/ without sleeves.
Woolen felt in middle layer and cotton fabric in the inner layer.
Stitching with Kevlar thread.
Two chest straps for adjustment.
Custom size.
100% Kevlar fabric.
L type construction.
Cotton fabric in the inner layer.
Stitching with Kevlar thread.
Straps for adjustment.
Custom size.
Construction: The outer layer of the suit is made of aluminised Kevlar fabric. The inner layer is made of woolen fabric lining and the third layer is made of flame retardant cotton cloth. All stitches are done with heavy-duty Kevlar thread. The construction of the material is user durable, non-allergic, and skin-friendly.
Style:
1. Coverall: One-piece coverall with or without pouch to keep breathing apparatus.
2. Jacket and trouser: Jacket with or without pouch to keep breathing apparatus.
Accessories:
1. Hood consists of FRP helmet with mica and tinted polycarbonate visor.
2. One pair of aluminised gloves.
3. One pair of aluminised leg-guard.
4. One pair of shoes made of Kevlar upper and nitrile sole.
Applications: These suits are used widely in intense heat, fire, steam and hot liquid. Alumunised.
Construction:
1. Outer Shell: Nomex rip stop construction for greater abrasion resistance.
2. Moisture barrier: Resistant to water penetration and liquid chemicals.
3. Thermal Liner: FR felt attached to FR face cloth.
4. Reflective Tape: Tested to EN 471.
5. Standard: EN 469.
Style: Jacket and trouser.
1. Jacket
a. Two side pockets with flaps and one radio pocket on chest.
b. Front zipper extending to collar.
c. Lace intact at waist.
d. 5 cm wide retro-reflective trim, one trim around the chest, one trim around the waist and one trim each around the sleeves.
2. Trouser
a. Pass though pockets on both sides.
b. Fly zipper.
c. Adjustable braces.
d. Reflective trim near knees.
e. Elastic intake on back.
Accessories:
1. Fireman helmet as per EN443.
2. Fireman hand gloves, waterproof and fire resistant.
3. Fireman boots as per EN345-2.
Size: M/L/XL.
Applications: Fire fighters DuPont Nomex is a revolutionary heat and flame-resistant fiber, providing protection to millions of workers worldwide. Professional disaster management groups particularly fire fighters have been using the flame-resistant garment made of Nomex brand fiber. Unpredictable fires situations could create situations where temperatures could reach around 19000 Fahrenheit. This leaves workers vulnerable to serious injury. Nomex III A - innovative fiber is a blend of 93% Nomex with 5% Kevlar and 2% anti-static fiber. This fiber forms a protective guard to skin.
Nomex IIIA coverall protect from industrial flash fires. The aramid fibers used in the garment provides superior flame resistance. The fibers will not melt, burn, drip or support combustion in air. It is inherently flame resistant and this property cannot be degraded by laundering.
Material: Nomex IIIA (93% Nomex/ 5% Para Aramid/ 2% Anti-static).
Weight: 150 5% g/m (4.42 5% Oz/Yd) or custom weight.
Sizes: Small, medium, large and extra large or custom size.
Style: Single piece coverall with or without reflective tapes.
Colour: Orange and blue.
Description: This coverall features full sleeves having easy movement, five pockets for functionality and all stress points are bar-tack reinforced for strength.
Standard: Flame resistance.
Anti-static: EN1149-5.
Application: Petrochemicals, utilities, military, firefighter.
The coat can be customised and companys logo can be embroidered
Dupont Tychem C, hooded coverall is available in bright yellow for high visibility and with elasticated face, wrists, waist and ankles for an optimal fit, thumb loops prevent sleeves from riding up. Made from a lightweight and durable fabric (
Fabric: Plain polyester.
Colour: Orange and green.
Reflective tape:1. High gloss white or yellow2. Glass bead grey tape3. 3M Scotchlite.
Tape width: 1 or 2.
Style: Two side opening.
Design: Back cross and front H-shaped.