Our Products
Cooling Tower, Heat Exchanger & Parts
2 Products availableAutomobile Repair And Maintenance
1 Products availableChemical Machinery & Plant
1 Products availableConveyors
1 Products availableHeat Exchanger Parts
1 Products availableHeaters, Thermostats & Heating Devices
1 Products availableGenerators
1 Products availableWe offer a complete product range of FINNED TUBE EXCHANGER, REBOILER SYSTEM, Thermic fluid dryer radiator, COMPRESSOR RADIATOR and chillers tubes
ATE produces these tube bundles to TEMA Standards, so you do not compromise safety and quality for less cost and lead time. We guarantee our tube bundles will perform as well as or better than your original bundles. Our tube bundles are dimensionally interchangeable, cost-effective, and reliable.Tube bundles are pressure tested at 225 psi. each tube is independently reviewed for structural soundness as well as the tube sheet joint for each tube. Tubes can be plain, low-finned (internal and/or external) or high-finned (integral or applied fin) with many methods for tubeside/shellside enhancement available.
|
ATE produces these tube bundles to TEMA Standards, so you do not compromise safety and quality for less cost and lead time. We guarantee our tube bundles will perform as well as or better than your original bundles. Our tube bundles are dimensionally interchangeable, cost-effective, and reliable.Tube bundles are pressure tested at 225 psi. each tube is independently reviewed for structural soundness as well as the tube sheet joint for each tube.
Tubes can be plain, low-finned (internal and/or external) or high-finned (integral or applied fin) with many methods for tubeside/shellside enhancement available.
Tube to tubeplate/tubesheet jointing methods include roller-expansion (with or without expansion grooves) and/or welding in addition to secondary seals such as grommets, o-rings, hydroscopic and compression seals.
ATE can design, engineer and manufacture tubular air pre-heaters, typically used for combustion air pre-heating. Rigorously engineered, the air pre-heaters are custom designed for your plant layout. We can handle very high gas temperatures, up to 1, 750 F with our refractory lined units.
Precoolers are evaporative cooling modules that are used specifically to precool air that is used to cool equipment such as heat exchangers, etc. Perhaps the best example of how a precooler is used is the conventional air conditioner condenser coil.
This coil is used to dissipate heat to the outside air during the cooling cycle of the air conditioner. Without precooling, the condenser coil uses outside air to dissipate the heat. If that heat is 120 degrees (f) then the efficiency of the heat transfer is greatly reduced. With precooling, the 120 degree (f) air temperature is reduced to about 90 degrees (f) which greatly improves the efficiency of the heat transfer of the condenser coil.
At lower temperatures across the condenser coil, the air conditioner efficiency improves, the energy use is reduced and the compressor useful life is increased. The air conditioner produces colder air at a lower energy cost.
Precoolers save energy costs, improve efficiency of the equipment being precooled and extends useful lifetime of the equipment.
Benefits
Applications
our heating and cooling coils range is the result of over 15 years of experience in the sector both on the engineering and on the manufacturing sides. Coils for heating, cooling, and heat recovery can be manufactured to almost any size using or 5/8 o.d copper tubes with aluminium or copper fins and galvanized or stainless steel casings for duct or ahu mounting.
steam heating coilssteam air heating coils for air conditioning and process heating using dry saturated steam.coils can be manufactured to suit almost any size of ducting, plenum or air handling unit.
hot water heating coilshot water air heating coils for air conditioning and process heating using l.p.h.w., m.p.h.w., h.p.h.w. Or low grade hot water generated from other equipment.
chilled water cooling coilschilled water air cooling coils for air conditioning and process cooling which can be used with ethylene or propylene glycol solutions for low temperature applications.
dx cooling coilsdirect expansion air cooling coils for air conditioning and process cooling which can be used with hfc and hcfc refrigerants.
ate manufactures heating and cooling coils for:- air handling units- ventilation- refrigeration- marine applications- food processing industry- industrial applications- special applications
features:- up to 9.5 m coil length- construction according to your standard and drawing- many materials and geometries available- replacement coils- 2 weeks delivery- many accessories available
we make finned tube heat exchangers of the highest quality in any size and specification.these can be made for use in a wide variety of different industries and applications and are ideal for marine, compressors and power generation applications to name only a few.
applicationhydrocarbon condensation
vapour condensation
gas and diesel engine jacket water cooling
industrial process water cooling
gas cooling
oil cooling
|
model : ate06-evap
|
Function:Used for evaporation, dryer, demisting Material of Construction:Aluminum Structure:Bar and Plate Heat Exchanger Specialty:High Heat Transfer ability , Energy-Saving Heat Exchanger Application:Air DryersGeneral Process:3-in-1 and 4 in 1 heat exchanger and water-oil separator model is designed specially for the Refrigerated Air Dryer. It consists of Precooler (Air to Air Plate Fin Heat Exchanger), Evaporator (Air to Refrigerant Plate-Fin Heat Exchanger) and stainless steel mesh Gas-Liquid separator filter. It has four functions: Precooling, Cooling, Separation and Filtration. There is insulating layer outside of this unit in order to reduce the loss of heat and increase the effectiveness. Precooler and Evaporator are both aluminum vacuum brazed Plate-Fin Heat Exchangers. Compared with shell and tube heat exchanger in traditional refrigerated air dryer, the heat transfer area of plate-fin heat exchanger is larger and so the exchanger effectiveness is higher. Generally, the heat transfer area density of plate-fin heat exchanger can be 1500m2/m3, but the shell and tube heat exchangers is only about 160m2/m3. And the heat transfer coefficient of plate-fin heat exchanger is 5-10 times higher than shell and tube heat exchanger. Air-water separator uses optimized spiral guide structure and the main principle is to separate the liquid and gas according to the difference of the liquid weight and gas weight and using gas flow direction and the inertia of speed changing. Mesh filter is made of some steel mesh and it can filterate air secondary to increase the dry efficiency. Features and Advantages1Compact size:- Reduces the total air dryer size- Significantly reduces the refrigerant hold-up volume2Highly efficient thermal performance and low pressure drop minimizes power usage.3Low price.4Easy to repair and long service life.5Full compatibility with the most common refrigerants. TestingAll of our 4 in 1 heat exchangers undergo a hydrostatic test of 1.5 times the design pressure with water for 30 minutes and a leak test of 1.1 times the design pressure with air for 10 minutes for the air side. After passed by the above tests, each unit is to perform 24 hours keeping pressure of 18 bar and conduct helium test for the refrigerant side, respectively. |
model : ate26-grad
|
model : ate32-crad
|
This products have been widely used in wind power generators in India. The special arrangement of tubes lowers the internal wind-resistance, improves the cooling flow of the generator and increase the efficiency. |