Abhinav Cranes

Chinchwad, Pune, Maharashtra

Special Features

• Design conforms to IS-807, IS-3177.
• Forged runner wheels on spherical roller bearings, resulting in long trouble free service.
• Hobbed and run-in heat treated gears from high carbon & alloy steels for long trouble free service.
• Standardised unit sub-assemblies used for complete range, ensuring possibility of spares supply from stock.
• Wide range of lifts, hoisting, cross & long travel
• Optimum design ensuring minimum dead weight, wheel loads, head rooms and clearances, reducing building costs.
• Speeds to suit every operational requirement.
• Quick deliveries and prompt service after sales.

Design

• Amply proportioned main girder of box section, fabricated from tested quality IS-2062 plates, all butt welds 100% radiographed. Main girder further stiffened with long and short diaphragms. End carriages, either from rolled sections or fabricated from plates.
• Well proportioned rotating axle type runner wheels on "L" type bearing housings.
• Rope Drum fabricated from seamless pipes to ASTM A-106 Grade B or from IS-2062, stress relieved & long seams 100% radiographed.

PaintingAll exposed parts primed with Red-Oxide Zinc Chromate Primer and finished with Enamel paint to customer's colour scheme.

Bridge Drive

• Single/Twin drive with squirrel cage/slip ring induction motors. Through totally enclosed, oil immersed, helical gearboxes.
• All single drive units, Provided with amply proportioned line shafting, supported on self aligning bearings, housed in plummer blocks.

BrakeElectro hydraulic thrusters for all motions. DC/ AC EM brakes or additional brakes on request.

MotorsFoot mounted, ICE, frame size, crane duty motors for hoisting/auxiliary hoisting, cross travel and long travel.

Crane ControlFrom Floor through Pendant Push Buttons/ Open Cabin / Totally Enclosed Cabin, operating at 110/ 24 V. Electrical switch gears mounted inside dust proof control panels, with suitable access for maintenance.

Power Supply SystemTo hoist & cross travel through trailing cables. To crane through trailing control / shrouded conductors/ bare copper conductors to customer's choice.

Special Features

• Design conforms to IS-807, IS-3177.
• Forged runner wheels on spherical roller bearings, resulting in long trouble free service.
• Hobbed and run-in heat treated gears from high carbon & alloy steels for long trouble free service.
• Standardised unit sub-assemblies used for complete range, ensuring possibility of spares supply from stock.
• Wide range of lifts, hoisting, cross & long travel
• Optimum design ensuring minimum dead weight, wheel loads, head rooms and clearances, reducing building costs.
• Speeds to suit every operational requirement.
• Quick deliveries and prompt service after sales.

Design

• Amply proportioned main girder of box section, fabricated from tested quality IS-2062 plates, all butt welds 100% radiographed. Main girder further stiffened with long and short diaphragms. End carriages, either from rolled sections or fabricated from plates.
• Well proportioned rotating axle type runner wheels on "L" type bearing housings.
• Rope Drum fabricated from seamless pipes to ASTM A-106 Grade B or from IS-2062, stress relieved & long seams 100% radiographed.

PaintingAll exposed parts primed with Red-Oxide Zinc Chromate Primer and finished with Enamel paint to customer's colour scheme.

Bridge Drive

• Single/Twin drive with squirrel cage/slip ring induction motors. Through totally enclosed, oil immersed, helical gearboxes.
• All single drive units, Provided with amply proportioned line shafting, supported on self aligning bearings, housed in plummer blocks.

BrakeElectro hydraulic thrusters for all motions. DC/ AC EM brakes or additional brakes on request.

MotorsFoot mounted, ICE, frame size, crane duty motors for hoisting/auxiliary hoisting, cross travel and long travel.

Crane ControlFrom Floor through Pendant Push Buttons/ Open Cabin / Totally Enclosed Cabin, operating at 110/ 24 V. Electrical switch gears mounted inside dust proof control panels, with suitable access for maintenance.

Power Supply SystemTo hoist & cross travel through trailing cables. To crane through trailing control / shrouded conductors/ bare copper conductors to customer's choice.

Specific Features

• Anti abrasive finish
• Superior weathering resistance
• Smooth surface design
• Long functional life

Features

• Robust and tensile
• Heavy load capacity
• Long lasting
• Corrosion resistant
• Easy to use and maintain

Features

• Excellent construction
• Easy to use and helpful
• Reliable and efficient
• Long lasting and low maintenance
• High tensile strength
• Heavy load capacity

Features

• Tough and tensile
• Easy to use
• Low maintenance
• Greater load capacity
• Long lasting

We are using high standard raw material and modern technology in the manufacturing process. They are perfectly designed in modular construction, which can greatly simplify for maintenance.

Specifications

• Low maintenance
• Optimum performance
• Standard material
• Innovative design
• Durable

We produce high maintenance of hoists in multiple capacities at cost competitive prices.

Key Features

• Optimum performance
• Compact design
• Durable
• Optimum performance
• Standard material

We provide machine repairing, installation and up-gradation services at market leading prices.

Specific Properties

• Adherence to set quality norms
• Timely completion
• Smooth operation