Mumbai, Maharashtra, India
Our Products
Hot rolling is a metalworking process that occurs above the re-crystallization temperature of the material. After the grains deform during processing, they re-crystallize, which maintains an equated microstructure and prevents the metal from work-hardening.
The starting material is usually large pieces of metal, like semi-finished casting products, such as slabs, blooms, and billets. If these products come from a continuous casting operation the products are usually fed directly into the rolling mills at a proper temperature. In smaller operations, the material is at room temperature and must be heated. This is done in a gas- or oil-fired soaking pit for larger work pieces and for smaller work pieces induction-heating is used. As the material is worked the temperature must be monitored to make sure it remains above the re-crystallization temperature.
To maintain a safety factor a finishing temperature is defined above the re-crystallization temperature; this is usually 50 to 100 C (122 to 212 F) above the re-crystallization temperature. If the temperature drops, the material must be re-heated before hot rolling.
| SIZE | |
| Thick | 20.00 mm to 100.00 mm |
| Width | 750mm to 2000 mm |
| length | 2500 mm to 12500 mm |
| IF SLIT COIL | |
| Thick | 20.00 mm to 100.00 mm |
| Width | 1250 mm to 2500 mm |
| Length | 2500 mm to 12500 mm |
GRADE
2062 Grade
Boiler Quality.
APPLICATION
Boiler & Pressure Vessels
Ship Building
Railways
Heat Exchangers
Oil & Petrochemicals
Coal & Mining
General & Heavy Engineering.
We are engaged in offering Hot Rolled High Tensile in different grades, as per the specifications of our clients.
These coils and sheets are made from quality mild steel that is procured from authentic vendors of the industry. Available in varied thickness and width.
| SIZE | |
| Thick | 4.00 mm - 80.00 mm |
| Width | 1250 / 1500 / 1800 / 2000 / 2500 mm |
GRADE
S-355 / ST 52
FE 510
APPLICATION
Special Purpose
Boiler and pressure vessel manufacture
Ship building
Pipe
Machine Building
Marine containers
Coal and mining
General as well as heavy engineering
Corrugated galvanised sheet is a building material composed of sheets of hot-dip galvanised mild steel, cold-rolled to produce a linear corrugated pattern in them. The corrugations increase the bending strength of the sheet in the direction perpendicular to the corrugations, but not parallel to them. Normally each sheet is manufactured longer in its strong direction.
Corrugated galvanised sheet is lightweight and easily transported. It was and still is widely used especially in rural and military buildings such as sheds and water tanks.
| SIZE | |
| Thick | 0.16 mm to 1.00 mm |
| Width | 740 mm to 1250 mm(After Corrugation) |
| Length | up to 4800 mm |
GRADE
--
APPLICATION
Construction
Roofing
Partition
Cold Rolled process for better surface quality, closer tolerances lower thickness and good form-ability. Abhay Ispat is one of the biggest suppliers in cold rolled sheets.
SPECIFICATIONS| SIZE | |
| Thick | 0.40 mm to 1.00 mm |
| Width | 1000 mm to 1060 mm(After corrugation) |
| Length | up to 10000 mm |
GRADE
Soft & in all colours
APPLICATION
Roofing
Partition
TMT bars, or Thermo-Mechanically Treated steel bars, are best described as the new generation of high-strength steel. TMT bars are known for its superior properties, such as weldability, strength, tensility and ductility.
The unique ribs allow superior bonding strength between the TMT bar and the concrete. ABHAY ISPAT (INDIA) PVT. LTD. produces TMT bars that are characterized by being extremely fire, earthquake and corrosion resistant. TMT bars from ABHAY ISPAT (INDIA) PVT. LTD. are also malleable, flexible and weldable.
| SIZE | |
| Thick | 8 mm - 40 mm |
| Length | 6 Meters, 9 Meters, 12 Meters |
GRADE
IS 1786
FE 415
FE 500
FE 550
APPLICATION
Dams
Bridges
Coastal construction
Power plants
High-rise buildings
Underground as well as raised platforms
Concrete reinforcement
