Aanal Magnetic Industries

Odhav, Ahmedabad, Gujarat

They are available in both flat and curved shapes and could be installed either above or along the passage of materials flow. They are provided with Clamps and could be located on the conveyor of carrying such materials ideally, they are located 30 mm above the layer of material flow. These plates are constructed with high energy permanent magnets plated in a magnetic circuit. They are extensively used in CTS Tea machinery and in Biscuit stacking machines. They are available in various sizes as per the requirement.

Permanent Magnetic Plates are used for separation of tramp iron found in Tea. Tobacco, Coffee, Cocoa, Milk Powder, Chemicals etc.

They are available in both flat and curved shapes and could be installed either above or along the passage of materials flow. They are provided with Clamps and could be located on the conveyor of carrying such materials ideally, they are located 30 mm above the layer of material flow. These plates are constructed with high energy permanent magnets plated in a magnetic circuit. They are extensively used in CTS Tea machinery and in Biscuit stacking machines. They are available in various sizes as per the requirement.

For Faster, More Accurate Sizing, Splitting or Correcting. Designed for use in the sizing of Minerals, Ceramics, Refractories and other powders. The principle on which the Multi-Form grader operates is equally adaptable for the handling of many ceramic products. The Unit is more than "Just a Screen" It is is a precision tool for producing accurate grades, not merely rough groupings of sizes. It is economical of power and space; screen life is long; upkeep low. Flexible in its adaptability to widely different materials and conditions, it is unyielding in the uniformity of grades produced. Available in several models.

AANAL VIBRO SCREENS are one of the most Versatile, Reliable and Economical continuous process equipment for carrying out various Size Based Separation like Screening, Sifting, Classification, Grading, Oversize or Undersize Removal, De-Dusting, Dewatering, De-Lumping, Fiber Recovery, Filtration, Pre-Filtration and Scalping. AANAL VIBRO SCREENS are Vibratory or Gyratory Sieving Machine designed on the principle of gyratory motion generated by vibromotor. The machine performs any size based separation with the use of wire mesh or perforated sheet and can work for various application of solid separation or solid liquid separation or slurry separation.

Manufacture a wide range of Rare Earth and Ferrite Magnetic Pulleys. These Pulleys are widely used to remove tramp iron mixed with the material moving on a conveyor belt. The permanent magnetic pulley is dual-purpose equipment used for protection of crusher Jaws or other machinery and also for purification and concentration of magnetic material from the mines. It has the widest application in food, chemical, ceramic, paper, coal handling, foundry operation and mining industry.

"AANAL MAGNETIC" manufacture a wide range of Rare Earth and Ferrite Magnetic Pulleys. These Pulleys are widely used to remove tramp iron mixed with the material moving on a conveyor belt. The permanent magnetic pulley is dual-purpose equipment used for protection of crusher Jaws or other machinery and also for purification and concentration of magnetic material from the mines. It has the widest application in food, chemical, ceramic, paper, coal handling, foundry operation and mining industry. The magnetism in a Permanent Magnetic Pulley is generated by internal assembly of magnets enclosed in non magnetic Stainless Steel shell. The steel shaft is extended on both sides. One side is provided with Key-way. The Pulleys have a face width of 50 mm to 100 mm more than the belt width. The magnetic strength of the pulley depends on the diameter and also quality of magnets used. Pulleys with Rare Earth Magnets can handle depths up to 300 mm. Pulley width is determined by width of conveyor belt to be used. Diameter depends on depth of material and speed of the conveyor. It can be designed to suit custemers specificapplication. The magnetic Drum pulley replaces the drive pulley at the end of conveyor belts. In view of the wide variety of conveyor belt types, the drum pulley are supplied made to measure and ready for installation. As the figure clearly show, the magnetic head roller extracts the iron particles from the material flow and carries them to the underside of the belt where they are removed and collected. Head roller magnets for conveyor belt are supplied in permanent magnets.

Features

• 304 stainless steel faces.
• Removable mild steel shaft.
• Four hub styles.
• Flat face.
• Key way and set screws.

Options:

• Taper locks
• Crowned face
• Fixed shaft
• Lagging
• Stainless steel shaft

Inline Magnetic Separators are available for installation in the Feed lines such as at the outlet of elevator, screw conveyor etc. Flanged type Inlet and outlet connections are provided. The Magnetic Drum incorporates High Intensity stroncium / Rare Earth Magnets. These are widely used for Cattle Feed Plants, Flour Mills, Rice Mill, Minerals, Refractories, Glass and many other Products.

Salient Features:

• Drum consists of High Coactivity modern Anisotropic Permanent Magnets.
• Strong & Rugged construction.
• Automatic Separation of Iron Impurities.
• Completely enclosed design to avoid dusting and pollution.

Rotary Drum Magnetic Saparator: Abstract: Solid waste incinerator fuel is pre-classified by passing it through a hollow rotating cylindrical drum which has magnetic extensions called flights protruding from the inside of the drum wall along its length. The drum may also have a first set of non-magnetic flights towards one end protruding further from the wall toward the center or axis of the drum. Then a second non-magnetic portion on the other side of the magnetic flights along the length of the drum. The magnetic flights attract particles and material subject to magnetic attraction. The ends of the first set of non-magnetic flights towards the middle of the length of the drum are preferably shaped or rounded somewhat lengthwise. A scraper assembly preferably having two material removal channels or chutes in addition to a scraper blade, may be arranged to extend into an exit end of the drum. The scraper blade removes magnetic or iron particles from the magnetic flights as the drum rotates. These are carried out of the drum via a first of the two channels, with the non-magnetic non-combustibles being carried out via a second channel

With reduction gear, l HP 3 Phase Electric Motor to drive the drum at a speed of 15 RPM, Vibrating Tray fixed in between Hopper and Drum extra high power permanent magnetic plate at bottom side & Machine complete with close body.

Salient Features :-

Drum consists of high coercivity modernanisotropic Permanant Magnets. Strong & rugged construction. Automatic separation of iron impurities. Completely closed design to avoid dusting and air pollution. Aanal Magnetic Made Double & Triple Drum Type Permanant Magnetic Separator Manufactured By Well Known Parameters in the Magnetic Field.A Unique Device Made From Strong Anisotropic Magnets For Permanant Separating Iron Contents From Powders, Minerals, Chemicals, Food, Flour Plastics, Grains, Sand Cement, Fertilizers, Abrasive, Glass Stag, Ores Rock And Many Other Products.

Aanal Magnetic Humps are used where the flow of material is vertical. The material falling strikes directly on the first magnet changes direction and falls over the second magnet, ensuring clean outflow of material. The Magnets are of hinged type and can be easily opened for periodic cleaning. Hump Magnets can be supplied to suit any size of Pipe/Duct.

Hump magnet separators are also used to remove ferrous contaminants iron nuts, bolts, wire, banding etc. from the conveyed material. With the hinged doors, cleaning the magnetic surface is quick and easy. The unit can be mounted directly in the air stream with the square to round transitions which can be provided.

Hump magnetic separators consists of two plate magnets which are hinged and gasketed to the rugged steel housing. These plate magnets can be unlatched and swing open for quick manual cleaning.

In the line of manufacturing different products, we have our products as:

MagneticEquipment VibratingEquipment ConveyorSystem

More concerned about customer satisfaction we adopt different policies for customer care. Each of our products is subject to strict quality control measures to ensure that only the best in terms of quality and design reaches the market. We believe that our clients know us for the quality that we provide and are fully aware of our responsibility of catering to their needs and requirements in this regard. Half Hump Magnets: Our Half-Hump Magnets can be applied where Hump Magnets will not fit due to height restrictions. Like its full version, the Half-Hump housing directs the material flow over the single high-strength permanent magnet and breaks up aggregated material to Dis-lodge and capture the embedded metal contaminants.

single/double deck vibrating screening machines are designed for screening of powders. These machines are simple and robust in construction. available in screen size of 1500 x 600mm, 1800mm x 800mm, 2500mm x 800mm. Special sizes as per customer specifications are also manufactured.the vibrating screens are also available with magnetic system to remove fine iron. Contamination from products like chemicals, pharmaceutical and food products etc.