Our Products
Exhaust Systems
2 Products availableScissor Lifts
1 Products availableAutomobile Repair Tools & Equipment
1 Products availableSpot Welding Machines
1 Products availableElectric Cutting Tools
1 Products availableMeasuring Instruments
1 Products availableSpray Painting Equipment
1 Products availableGearbox & Gear Parts
1 Products availableWe offer a complete product range of Heat Inductor, InvertaSpot GT BM Resistance spot welding machine, Dent Pulling System Quick, Airpuller and Portable Quick Dent Pulling System
Extraction-Rail systems, whilst based on standard components, are usually individually engineered to suit client's requirements.
An Extraction-Rail system comprises a self-supporting aluminium rail, on which runs a sliding crab or a number of sliding crabs. The crab can be equipped with a length of crushproof hose with/withouthose balancer as required, the crab can also be fitted with a hose reel, arranged for spring recoil or motorised recoil. Motorised sliding crabs with hose reel are also available.
Sliding crabs travel on teflon bearings/wheels. Normal mounting height for the rail is approximately 4.0m above ground level.
Extraction-Rail systems are available in straight rail or return rail configuration. The aluminium rail acts as a smooth-running track for the sliding crabs, at the same time acting as an exhaust ventilation duct. The sliding crabs are complete with extraction hose and a variety of options are available as illustrated opposite i.e. available with hose balancer, hose reel, either of the spring recoil type or motorised. Also the sliding movement of the crab can be motorised.
Extraction-Rail systems allow versatility within the workshop and provide for ease of use. Simply slide the crab along the rail to the point of use, pull down the hose, attach the nozzle to the exhaust pipe - following use hose is automatically elevated keeping the workshop operating area clear.
Important Details:
Basic SystemCan work with the existing spot welders equipped with single sided gunsWith trolley for future expansion
Application:
Medium Pulling bar, Double Support system, Lever puller, 3 Claw puller, 6 Claw puller, Hand puller, Sliding hammer , Wavy Wire, Oval Eyelets straight & twistedAttachment for existing single side welder, Upgrade anytime
The professional dent repair system sets standards in ease of use without making compromises in cost. With the Airpuller AP 95 you can do the entire dents repair from outside in a fraction of the time that is normally needed when using existing tools.
For Example
Hail DamageLittle dentsOn double-sided car body areas.For Panel Shrinking.Even Panel shrinking of so called high spots is no problem with the Airpuller AP 95.
rom now on frightening hail damage on cars roofs can be done without problem. You will not have to spend time on expensive Preparations or on removing the inside trimmings.
The Airpuller is so simple to use you can use it immediately without any special training , and you can see how clever it is when removing long scratches and scrapes on the side panels of cars.
Extremely useful in Haildamage.Fast, Efficient and EconomicalQuick ReturnsCustomer Delight.
Application
Remove primer and finishing coats of paint from the damaged area and clean the sheet metal until bright.Insert welding studs 2, 0 mm into the electrode tip.Put the outer and the inner electrode with stud onto the prepared spot.Press welding button for 0, 2 - 0, 5 seconds The best welding time is achieved when the blue burn mark around the stud has got a diameter of approx. 5 mm.Pull on the welding stud using the original head of the tool until the required position is achieved, In some cases, the use of the sliding hammer will be needed.
It includes the following:
Lifting Capacity-3.5 Ton
Controlled by Dual Hydraulic Cylinder and automatic leveling function prevents uneven Lifting or lowering
of the load.
Floor or flush mounted.
Adjustable platform extensions to adapt for vehicle length.
Safety: Integrated emergency lowering device in case of Power failure. There is no mechanical connection between the platform which provide the maximum and perfect freedom of movement underneath the vehicle.
Forced Air CoolingBrand AAM Migatronic Denmark
Specification
Current Range DC 20A/14V-250A/21.5V, 3 Phase , 400 VoltsOpen Circuit voltage 14V DC- 13V DC, Voltage Adjustment Step 10Consumption Max 7.5 KW, Fuse 10 Amps, 3 Phase 50 to 60HzWire Speed 1-15 m per min , Protection IP21, Weight 55 kg , Dimensions 43 x 87 x 79
Lifting Capacity 4.5 Tons
Lifting Mechanism: Patented high Pressure Hydraulic System.
Safety: Patented Lock Systems.
Extramely suitable for all mechanical repairs Quick Lube Bays, Express Service and Body shops.
Now get rid of dent on the doors while working. Technicians have ample room around the vehicle to work
on. Install more lifts in the same space thereby increasing the productivity.
Lifting Capacity: 2000 lbs(900Kg)
Hand Operated Controls
Optional :
Centre Jack (Zinc)
Deluxe Wheel Clamp
Side Extension Set
Plasma Cuttersfor Efficiency & Productivity Now cut heavy steel panels quickly, efficiently and with safety. Plasma is better than gas cutting. The risk of corrosion is reduced to a large extent. Cuts many times faster than gas. Cuts chassis like butter!
Features:
The all new Plama31FV, with flexible voltage control technology. Can withstand 85 volts to250 volts! Thanks to the PFC-the new Power Factor Control system.
Features:
| |
Extraordinary accuracy and easiness to use.
Zeroline: length, width, diagonal and now height too are measured digitally with numerical accuracy.
Zeroline can work with any inclination: by pressing the calibration button you create the zero reference plane even if the car is not in a horizontal position.
Suitable for measuring body / mechanical parts / wheel alignment etc.
Extremely Durable and portable.
No Time consuming testing of plastic types.
Remove Dent, Warps.
Cracks can be repaired in few minutes of
Bumper/Bumper holder, Fairings, Mirror Housings etc.
Repair small cracks in Windshields.
Save expensive repairs.
Reduce incurred insurance costs.
Increase customer satisfaction.
Increase labour revenue.
Two Hose reel with fan and four house reel with centralised fans.Control for automatic start and stop.Nozzle for double exhaust pipe.Fan 1 HP
For all types of vehicle workshops, etc. where the hose can hang at a reachable height. The patented spring drive makes the reel very easy to handle. A patented integrated automatic damper saves energy and reduces the noise level Optional retraction control is available for increased safety and efficiency. Mounting of fan on reel is possible. The spring recoiled hose reel can be upgraded to motor drive.
Simple and safe installation- Automatic damper for energy savings- Simple adjustment of lifting capacity- Automatic fan on/off switch as option- Retraction control as option
The best solution in workshops with a high ceiling, where overhead cranes etc. have to be considered, or where high vehicles must pass. Operated via a hand unit either an IR control or pendant control. A receiving eye on the reel shows the status of operation. Electronic limit switches reduce the risk of malfunction and unnecessary wearing of the hose. Fan start/stop is automatically controlled. Mounting of fan on reel is possible
Convenient and safe operation- Automatic fan operation- Settings for limit switches made from floor level- Compact, modern design- Quick & easy installation reduces cost
The most innovative point of our work bay constructions is the general usage of lightweight aluminium truss systems instead of a heavy steel structure. The adavantages are a perfect and professional view, a weight reduction of approximately 75% and lower prices of the standard elements. It avoids problems with the static of the workshop building and makes the installation process fast and easy. All in all this is the reason why we show that aluminium truss in our own brand label!
Fixed sets of body repair bays are available for:
-Aluminium body structural repair
-Steel body structural repair-Lightweight Steel/aluminium hybrid body structures including Carbon and other reinforced high tech plastics-Paint preparation-Finish and smart repair
Wallboard: EPS colorful steel skin panel, 50 mm thick, tongue & Groove style, compound construction. anti-flame and heat-insulation, galvanized steel roof panel.2. galvanized steel and square steel pipe assembling, grid & embossed steel plate, 2 embossed steel ramps.
Washing quality plays a vital role in Customer Satisfaction. In many cases, it is found that, seat, steering and gear knob are found dirty with oil marks because these items came in regular contact ofoil soaked hands and dress of our mechanics.
Disposable Covers are proved as effective solution for this problem.
Benefits
Major benefits of disposable covers are:
Special Hammer kit with adjustable weight. Made of special plastic for beating out dents on Aluminum panels. The changeable weight along with changeable face of the hammer, helps remove dents easily from the panels.
Kit includes Hammer, Dolly and weights.
A must for all workshops undertaking Aluminum repairs.