Our Products

Other Products / Services #4101500

Aluminium Terminals

Sizes 2.5 Sqmm to 300 Sqmm

Aluminum Reducer Terminals are available from 2.5 mm2 to 300 mm2 range. These terminals are manufactured using supreme quality aluminum and are absolutely corrosion resistant

View Complete Details

Ask Latest Price & Details

Crane Motor

Voltage 415V ± 10% or as required
Duty cycle S2 – S5

TEFC squirrel cage induction motors specifically designed for DOL operated Crane duty intermittent duty application. The motors are designed to take care of the high electrical and mechanical stresses arising due to frequent starts - stops associated with intermittent duty application. The motors are compact providing high output for a given frame size and have low inertia. These salient features make them most suitable for EOT Cranes.

View Complete Details

Ask Latest Price & Details

Decorative Street Light

Temperature 0°C to 50°C

LED Decorative Street Lights across India, UAE and Africa. Our offered lights are available in various technical specifications that best suit various requirements of the clients.Housing : Single piece pressure die cast powder coated housing, Visor : Decorative polycarbonate cover, Hardware : S. S. Hardware, Operating Temperature : 0C to 50C

View Complete Details

Ask Latest Price & Details

Inverter Duty Motors

The use of frequency inverter enables a continuous control of the motor speed and provides constant torque in the whole speed range. The rating for variable speed induction motors need to be selected based on the following aspects: Heating due to harmonic content of inverter waveform.Reduced ventilation due to low speed operation.Constant torqueConstant Power Variable torque requirement of load.Other limiting factors e.g. maximum permissible motor speed, ambient temperature, altitude etc.While variable speed drives provide highest energy saving for variable torque (Centrifugal pump, fan) applications, for constant torque and constant power application, Variable speed drives offer significant process control improvements. Basic inverters permit operation over a typical 20:1 speed range. With closed loop vector control the effective range may be increased to 1000:1.

View Complete Details

Ask Latest Price & Details

Led Focus Light

Temperature 0°C to 50°C

1. Housing : Single piece pressure die cast powder coated housing2. Visor : Polycarbonate narrow beam lens3. Gasket : Synthetic gasket4. Hardware : S. S. Hardware5. Ingress Protection : IP656. Operating Temperature : 0C to 50C

View Complete Details

Ask Latest Price & Details

Aluminium Cable Gland

Material Brass (IS -391) Standard (Alu./ S.S./M.S./aslo available)
Ref. Standard IS 12943 - 1990

Single Compression Gland as per IS13942 or as per IS-1394 the compression is effected only at one place (i.e.) at the cable armour only. There is scope for moisture and corrosive vapour to enter the gland and thus into the cable. Generally single compression glands are used for light armored cables

View Complete Details

Ask Latest Price & Details

Insulated Lugs

These Copper Terminals are available up to 150sq.mm. in various stud hole sizes are available upto 150 Sqmm Size in various Stud hole Sizes. Material : ETP Grade Copper IS 1857Finish : ElectroTinned to avoid oxidation and to achieve maximum corrosion Protection Properly Brazed TerminalsAnnealed to give crack free crimpingTerminal Lugs can be provided with PVC sleeves to avoid electrical shocks.Metal Reinforced Sleeve lugs are also available to give a proper Grip on Conductor

View Complete Details

Ask Latest Price & Details

Copper Terminal Lugs

Sizes 2.5 Sqmm to 630 Sqmm

Copper crimping Terminals lugs are manufactured out EC grade extrusion tubes drawn to the required sizes. The Long barrel length ensures better electrical and mechanical performance due to more number of crimps. The lugs are provided with inspection hole to ensure the conductor has been fully inserted before crimping is done.

View Complete Details

Ask Latest Price & Details

Power Slip Rings

Supply 3 phase, 415 Volt ± 10%, 50 Hz ± 5% as standard. Other voltages and frequencies are also catered 3.3/6.6 kV options are available.

Designed basically for heavy duty use with driven machine imposing overloads and severe mechanical shocks and vibrations. These motors are equally suitable for smooth constant loads since the motors are also designed with high efficiency and power factor. Because of optimum utilisation of materials, with improved ventilation techniques the motors are 10 15% lighter in weight and yet more rugged because of their inherent special construction. Because of high Pull Out Torque and inherent thermal margin kept for high slip operation (with suitable external resistance) these motors are ideally suited for rerolling mills and cane cuttercane crushercane levellercane fiborizer applications pertaining to sugar industries. Because of high efficiency and power factor these motors are also suitable for pumpfan compressor applications.

View Complete Details

Ask Latest Price & Details

Motor Fan Cover

Rated 0.75 to 375 kW

Efficiency of an electric motor is defined as the efficiency with which it converts electrical energy to mechanical energy. It is a fact that motors consume 70% of energy in industry, therefore using high efficiency motors will result in huge savings & reduction in environmental impact. The demand for standardised efficiency led manufacturers to develop harmonised international standard and push the issue of IEC (International Electrotechnical Commision) Standard IEC 60034-30-1 & adopted in India as IS: 12615: 2011 efficiency classes for Single speed, three phase, cage induction motors.

View Complete Details

Ask Latest Price & Details

Air Motor

Voltage 11 kV

These motors are rugged motors can be custom designed to each customers specific application. Because of their design versatility and high operating efficiencies, our motors are the logical choice for a multitude of industries including oil and gas, petro-chemical, pulp and paper, electric utility, water and waste water, marine, steel, mining and air separation. Typical applications include agitators, blowers, boring mills, pumps, conveyors, crushers, fans, and many more.

View Complete Details

Ask Latest Price & Details

Buchholz Relay

voltages 11kV, 22kV , 33kV, 66 kV & 110 kV

Generation of electrical power in low voltage level is very much cost effective. Theoretically, this low voltage level power can be transmitted to the receiving end. This low voltage power if transmitted results in greater line current which indeed cause more line losses. But if the voltage level of a power is increased, the current of the power is reduced which causes reduction in ohmic or I2R losses in the system, reduction in cross sectional area of the conductor i.e. reduction in capital cost of the system and it also improves the voltage regulation of the system. Because of these, low level power must be stepped up for efficient electrical power transmission. This is done by step up transformer at the sending side of the power system network. As this high voltage power may not be distributed to the customers directly, this must be stepped down to the desired level at the receiving end with the help of step down transformer. Thus electrical power transformer thus plays a vital role in power transmission.

View Complete Details

Ask Latest Price & Details

Led Decorative Light

Temperature 0°C to 50°C

1. Housing : Single piece pressure die cast powder coated housing2. Visor : Decorative polycarbonate cover3. Gasket : Synthetic gasket4. Hardware : S. S. Hardware5. Ingress Protection : IP666. Operating Temperature : 0C to 50C

View Complete Details

Ask Latest Price & Details

Dc Brake Motor

Voltage 415V or as required
KW 0.093 to 15.0 kW
RPM 3000, 1500, 1000, 750

Brake motors are ideal for applications that require immediate, accurate and safe stops, position control and energy saving. The brake motor is suitable for many different applications, such as load elevators, hoists, shears, machining equipment, looms, packaging machines, conveyors, washing and bottling machines, bending machines, among others. The brake motors are simple & rugged & so easy for maintenance. No separate DC supply is required as the rectifier is provided which gives the required DC voltage for energisation of the brake. The rectifier is mounted inside the main terminal box so no separate terminal box required.

View Complete Details

Ask Latest Price & Details

Resin Panel

Range 33KV and up to 3000KVA

These transformers can be installed wherever oil filled units cannot be used such as inside buildings, in tunnels, cranes, off shore platforms, ground catchment areas, public places etc. Range up to 33KV and up to 3000KVACast resin dry type transformerOff-circuit tap changer or On-load tap changerClass F and H insulationHV Delta connected, LV Star connected with Dyn 11 vector groupNatural air cooling and forced air coolingDuty cycle continuousWinding- copper duly resin castedEnclosure - IP 23 to IP 33 and as per customer specificationsCable boxes on HV and LVPainting shades as per IS and IEC standards or as per customer requirements

View Complete Details

Ask Latest Price & Details

Brake Rectifier

KW 0.093 to 15.0 kW
RPM 3000, 1500, 1000, 750

View Complete Details

Ask Latest Price & Details

Tell Us What are you looking for? Will call you back

Contact Us

Aakash Powertech Pvt Ltd. (Aakash Powertech Private Limited)
501-505 A Wing, Express Zone, Western Express Highway, Malad (East), Mumbai - 400097., Malad East, Maharashtra
Share us via
Call 08068659070 Ext. 766
Found Something Wrong with this Listing? Report Here.

Our Products

Wires 11 Products available
AC Motor 4 Products available
Transformers 3 Products available
Industrial Motors
2 Products available
- Crane Motor
- Dc Brake Motor
LED Lights
2 Products available
- Led Focus Light
- Led Decorative Light
Electrical Cables & Wires
2 Products available
- Insulated Lugs
- Copper Terminal Lugs
Cladding Materials And Building Panels
1 Products available
- Resin Panel
Electronic Components
1 Products available
- Brake Rectifier
Electric Fittings And Components
1 Products available
- Aluminium Terminals
Street Lights
1 Products available
- Decorative Street Light
Others Products 6 Products available