A.T.E. Enterprises Private Limited

Sarkhej, Ahmedabad, Gujarat

Technical Details

• Material of construction: upper lid - SS 304; motor housing/volute - C.I GG 25; rotor shaft - SS 420; impeller - C.I GG 25
• Head range: 0.5-26.5 m
• Flow range: 0-75 m3/hr
• Range: AS 0530 W to 0841 D
• Size range: 1-3 kW (1ph/3ph)

Applications

• Sewage and wastewater
• Wastewater from underground garages
• Dewatering of buildings and sites in private, commercial, and communal areas as well as industrial applications

Key Features

• Hydraulic design with Contrablock System or vortex impellers
• Water pressure-tight encapsulated fully flood-proof motors in standard or explosion-proof versions
• Option of automatic seal and temperature monitoring
• Available in transportable version
• Automatic coupling with single guide rail

Technical Details

• Material of construction (with options): outer jacket - SS 316; motor housing - SS 316; rotor shaft - SS 420; impeller - polyamide
• Head range: 1-6 m
• Flow range: 0-8.5 m3/hr
• Range: Coronoda 200 and 200 SX
• Size range: up to 0.30 kW (1 phase)

Applications

• Removing nuisance water from drainage pits, gullies, and pedestrian underpasses
• Flooded cellars and underground galleries
• Draining swimming pools and circulation in ponds
• Emptying and filling of containers

Key Features

• Float switch for permanent installation
• Built-in check valve blocks return-flow from the discharge line when the pump is switched off
• For transportable applications the hose nozzle designed for two standard hose sizes is ready for direct hose connection

Technical Details

• Range: IP 900
• Size range: up to 1.5 kW
• Flow range: 0-18 m3/hr
• Head range: 0-11 m
• Material of construction (with options): motor housing - SS 316; rotor shaft - SS 316; impeller - SS 316; fasteners - SS 316

Applications

• Pumping of aggressive media, clear and rain water
• Pumping of liquids which have a high proportion of solid or fibrous matter present
• Dewatering of buildings and sites
• Emptying or filling of containers

Key Features

• Pedestal or free standing mounting
• Specially designed for aggressive media thanks to the use of high grade stainless steel (AISI316), Viton seals and PVC cable
• Vortex hydraulics with 30 mm free passage for blockage-free pumping
• Available in manual or automatic version

Technical Details

• Material of construction (with options): motor housing - EN-GJL-250; motor shaft - SS 420; propeller - SS 329; bracket - SS 316
• Head range: 0- 2.5 m
• Flow range: up to 5800 m3/hr
• Range: XRCP-400 to 800
• Size range: up to 30 kW

Applications

• Recirculation of activated sludge in wastewater treatment plants
• For large flows and low heads

Key Features

• Self-cleaning propeller
• Silicon carbide mechanical seal
• Premium-efficiency IE3 motors or equivalent
• Seal monitoring using multiple sensors
• Thermo-Control System (TCS) provides timely warnings and auto switch-off

Technical Details

• Flow range: up to 9000 m3/hr
• Range: PE 4 to 7
• Size range: 11-350 kW
• Head range: up to 30 m
• Material of construction (with options): motor housing - EN-GJL-250; bellmouth - EN-GJL-250; impeller - EN-GJL-250; motor shaft - SS 420
• Class H (140C/284F) insulation

Applications

• Clear water and sewage containing solids
• Storm water and land drainage
• Flood protection
• Wastewater from commercial and industrial sources

Key Features

• Explosion-proof version as option (ATEX, FM or CSA)
• Double mechanical seal
• Seal protection against spinning fibres
• Sealed cable connection chamber with two stage cable entry
• Planetary gearboxes, driven by four-pole motors, deliver higher efficiency and lower weight compared to high-pole motors

Technical Details

• Material of construction (with options): motor housing - C.I GG 25/ SS 304; rotor shaft - SS 420; impeller - C.I GG 25; volute - C.I GG 25
• Head range: 0-35 m
• Flow range: 0-70 m3/hr
• Range: 601 to 902 L
• Size range: up to 4 kW

Applications

• Wastewater and sewage
• Civil work

Key Features

• Corrosion resistant synthetic collection tank
• Simple pipe connection by means of DIN push-on connection system. 2 - 4 inflow ports
• Standard ABS submersible pumps of the series AS and Piranha can be installed
• Pump controls by automatic level control system

Technical Details

• Material of construction: upper lid - SS 304; motor housing/volute - C.I. GG 25; rotor shaft - SS 420; impeller - polyamide
• Head range: up to 15 m
• Flow range: 2-32 m3/hr
• Range: MF 154W to MF 804D
• Size range: 0.7-2.6 kW (1ph/3ph)

Applications

• Transferring of neutral sewage from septic tanks of housing colonies and villas, resorts, clubs, industries, and IT parks, etc.
• Wastewater and sewage
• Dewatering of waste and food waters from basement

Key Features

• Can either be free standing or mounted on pedestal
• EasyFit plug-in cable connection
• Thermal sensor as standard for motor protection