Our Products
Understanding vehicle behavior under real driving conditions is essential to optimizing the chassis and powertrain design.
Ever-growing requirements for vehicle performance and fuel economy create many challenges for vehicle dynamics research.
The Wheel force Sensor (WFS), part of A&Ds Vehicle Measurement System, can perform high-accuracy real-time measurement
of forces (Fx, Fy, Fz) and moments (Mx, My, Mz) acting on the wheel hub under dynamic conditions.
The WFS uses distributed force measurement and model-based decomposition in the digital signal processor (DSP) for obtaining
individual force and moment components. This method provides extremely low cross-sensitivity, interference and temperature
sensitivity, while maintaining a high sampling rate. In addition to providing high accuracy and response rate, the WFS is also
capable of compensating for tire uniformity characteristics in real time to provide the ultimate force and torque measurement.
The WFS Wheel Force Sensor measures the six-component forces of a vehicle in dynamic conditions.
The distributed force detection method uses four-element strain gauges. These specially-designed strain gauges are arrangedfor heat balance within an extremely small area to form a bridge circuit that eliminates the influence of heat gradients, temperature changes and cross-talk interference.
Features | |
Repeatability as high as 1% of the measured value (by S.D.) even with low viscosity sample fluids Shear rate changes by controlling the sensor plate vibration amplitude Easy setup/cleaning and very quick measurement (stabilization in 20 seconds)Wide continuous measurement range (max. 0.3 to 25, 000 mPas)Little interference to the sample fluidPossible to measure fluids in motionComes with a special controller for:- Automatically changing the amplitude (shear rate) and capturing data in the manner set by the user- Real-time graphing of viscosity variation with time, temperature, as well as shear rate- Saving results (in CSV format) and graph screens (as JPEG images) in USB flash drives |
The UT-201BLE-A digital thermometer is fast and accurate, and more precisely monitors your health. An illuminated annunciator blinks and a beeping sound tells when the measurement is complete. This illuminated annunciator together with the large bold display enables a sufficient reading. Extended functionality of wireless communication is provided by Bluetooth Smart technology.
FeaturesAutomatic operation assuring accuracy for everyone at all times
Stress-minimized, pain-free operation using the forefinger
Easy calibration (adjustment) by yourself User CAL function*1*2
Calibration and display by either volume (L/mL) or weight (mg)*1
Accurate pipetting possible with other manufacturers' tips (List of compatible tips (PDF 40KB))
Dedicated glass tips and silicon adapters available (Flyer (PDF 336KB))
Multiple dispensing (MD) mode with automatic initial volume correction (pre-dispensing)
Mixing (MIX) mode for homogenizing solutions
Reverse operation for accurately dispensing viscous samples
Increased resistance to impacts from falls with padding on the head*1
Aspirating/dispensing speeds adjustable to 5 levels
Storage for up to 9 preferred settings
Quickly detachable, autoclavable lower part (121 deg C, 2 atm, 20 minutes)
Adjustable tip ejector reach
Long finger hook
Power supply by either a rechargeable battery or switching (100-240V) AC adapter
Multiple AC adapter plugs (A, BF, C, S)
Auto power OFF function
*1 Patent pending
*2 For verification of dispensed volumes necessary for calibration, theAD-4212B-PT/ AD-4212A-PT/ FX-300iPT pipette accuracy testers(orBM series + BM-014) are useful tools
Features | ||
Protected from dust and water to IP65 standards.Hygienic design with the entire system washable.Suitable for use in HACCP program.Automatic sensitivity setting function.Easy operation with 7 inch color touch panel.Variable belt speed of 10-60m/min.Standard Ethernet I/O allowing easy networking via LAN.Inspection history function with the ability to record 100 inspection results in the internal memory. Capacity can be increased by using USB memory.Cleaning and maintenance is simple with a detachable conveyor belt. |
Features | ||
Instant and smooth static elimination using a built-in fanless ionizer to ensure stable weighing Large working space for better operability and a wider range of applications Interlockable sliding doors allowing efficient operation with both handsAnti-static glass breeze break with a thin evaporated metal coatingAdjustable (manual or automatic) response characteristics to help cope with the effect of drafts and vibrationsAutomatic self calibration to maintain accuracy under temperature changesEmbedded temperature, humidity and atmospheric pressure sensorsMultiple weighing units: g, mg, oz, ozt, ct, mom, dwt, grain, specific gravity (either tael or tola can be added upon request)Comes equipped with the handy AD-1688 weighing data loggerClearly visible, reverse-backlit LCDGLP/GMP/GCP/ISO compliant outputClock and calendar functionData memory functionRS-232C and Quick USB interfaces as standardCounting mode with the Automatic Counting Accuracy Improvement (ACAI) functionPercent mode functionComparator function with buzzerAuto power on functionUnderhook functionSpecial pans/holder (BM-20/22)Density determination function and an optional density determination kit (for BM-252/200/300/500 only)Optional pipette accuracy testing kitWindows Communication Tools software (WinCT)Expert assessment of the set-up environment using AND-MEET* (please inquire at your local distributor for details) |
Features | |
High-speed weighing with 2-second stabilization Removable, shatterproof breeze break with antistatic coating Compact foot print: 198 mm 294 mm (smaller than an A4 sheet of paper)Rotary sliding doors requiring no extra space at the rearAdjustable response characteristics to help cope with the effect of drafts and vibrationsMultiple weighing units: g, mg, oz, ozt, ct, mom, dwt, grain, specific gravity, and a user-programmable unit for conversion applications (either tael, tola or Newton can be added upon request)Easily visible, front-mounted spirit level for adjusting the leveling feetAutomatic calibration with an internal mass (HR-AZ)Clear, reverse-backlit LCDGLP/GMP/GCP/ISO compliant outputClock and calendar function (HR-AZ)Counting mode with the Automatic Counting Accuracy Improvement (ACAI) functionPercent mode functionAnimal weighing (hold) functionStatistical calculation functionComparator function with buzzerAuto power on/off functionUnderhook functionDensity determination function and an optional density determination kitBuilt-in rechargeable battery (optional) |
Features |
Low moisture content measurement at 10 ppm (0.001%) resolution (MS-70) Fast and uniform heating with halogen lamp and innovative Secondary Radiation Assist (SRA) technology Accuracy verification with Sodium Tartrate Dihydrate (standard with MS-70, MX-50, and MF-50)High repeatability with the Super Hybrid Sensor (SHS) technologyCalibration function for heating temperature (for MS-70 and MX-50 only)Five different measurement programsSelectable heating patternsTranslucent window enabling progress checkMemory function for measurement conditionsLarge bright Vacuum Fluorescent DisplayGLP/GMP/GCP/ISO compliant outputQuick reference card provided |
Features | |
Triple weighing ranges (HV-G), or 1/10, 000 high resolution (HW-G) Large and clear display: either VFD (20 mm) or LCD (25 mm) Simple batch function and full/dribble batch functionIP65 compliant, dust and water-proof weighing platformWashable and hygienic, stainless steel weighing panBuilt-in impact dot matrix printer (optional, and for the VFD type only)Counting mode functionPercent mode functionAccumulation (M+) functionComparator functionAuto power on function (for the VFD type only)Auto power off function (for the LCD type only)Adjustable display angleDetachable display unitAbility to connect up to 16 scales to a computer via the RS-422/485 (optional)Roller conveyers available (optional)Wide selection from 14 models in totalHV-GL : Triple weighing ranges & LCD displayHV-GV : Triple weighing ranges & VFD displayHW-GL : High resolution & LCD displayHW-GV : High resolution & VFD display | |
External Input/Output | |
RS-232C interfaceRS-422/485 interface (optional)Comparator relay output with buzzer (optional) | |
Options | |
HVW-02G Extension cable (5 m)HVW-03G : RS-232C + comparator relay output with buzzerHVW-04G : RS-422/485 + comparator relay outputHVW-06G : Built-in printer for HV/HW-GVHVW-13 : Roller conveyer (large) for HV-200K, HW-100K/200KHVW-14 : Roller conveyer (medium) for HV/HW-60K * Only one of HVW-03G, HVW-04G or the standard RS-232C can be used.** HVW-06G is a factory-installed option. | |
Accessories | |
AD-1688: Weighing data logger***AD-8118CUniversal printerAD-8127: Compact printerAD-8526: Serial/Ethernet converterAD-8527: Quick USB adapter***AD-8920A: Remote displayAD-8922A: Remote controllerAX-USB-DIN : Serial/USB converterAX-PP156-S : Printer paper for the HVW-06G (10 rolls)AX-ERC-05-S : Ink ribbons for the HVW-06G (5 pieces) |
Laboratories are typically kept at a constant temperature by air conditioning. Contrary to what you may believe, a strict temperature control can adversely affect the stability of a micro analytical balance when the air conditioning causes strong air circulation and minute repeated temperature fluctuations around the set temperature.
Features |
Shields a highly sensitive analytical balance from breezes and minute temperature changes caused by air conditioning or people passing by.Consists of antistatic plastic panels to minimize the effect of static electricity on the balancePossible to pass RS-232C and AC adapter cables through two guides at the bottom of the back sideReady to assemble and easy to move from one location to another |
Features | ||
Simultaneous and chronological recording of environmental and weighing data Four kinds of environmental data: Temperature, humidity, barometric pressure, and vibration Large memory capacity of 10, 000 data setsInstant data saving to a PC requiring no special softwareReal-time transmission modeNo battery required when connected to either a weighing instrument or a PCPower-saving function when operated on batteriesRemaining battery level indicatorThree types of RS-232C cables and a USB cable provided as standardPrimary data mode to display only two data items of your choosingTrend graph mode to display chronological changes using graphsInterval time setting for environmental data recordingCompact, portable dimensions of 127 (W) by 90 (H) by 36 (D) mmIP65 dust and waterproof construction |
Sensors | |||||||||||||||||||||
|
Features | ||
Dual interface RS-232C and USB connectionsLarge memory of approx. 5, 000 weighing data setsInternal clock to save the date and timePocket size of 55 103 16.5 mmIP65 (with the casing cover)No battery required |
Features | |
Easy operation by following step-by-step guidance on a color touch-panel screen Daily balance check to confirm that the balance meets proper conditions for use Periodic balance check including tests for repeatability, accuracy/linearity, and eccentricity errorQuick glossary for periodic check itemsMinimum weight calculation according to the United Sates Pharmacopeia (USP) standardUncertainty calculation of balance calibration based on seven uncertainty componentsDocumentation of daily/periodic check results by either outputting to a printer or saving in a USB flash drive in PDF report formatsDocumentation of calibration results (with expanded uncertainty) by saving in a USB flash drive in PDF report formatAssessment of measurement environment using AND-MEET*1with the BM seriesRemote balance display and controlDate and time settingAdjustable LCD brightnessStand attachment and touch pen with holder to make operation easierTwo USB*2and three RS-232C interfacesThree kinds of RS-232C cables as standard |
Features |
With a length of 210mm, the tweezers allow a weight to be placed in a weighing pan without having to put a hand inside thechamber. This prevents convection flow that is normally attributed to heat coming from the hand.Each tweezer is made from austenitic stainless steel (SUS304), therefore heat from the hand is unlikely to be transmitted tothe weight via the tweezers. This is especially effective for the precise measurements required of analytical balances.Tips of the tweezers are covered in resin to prevent the weight from slipping. The hilt is also covered with resin for easy gripping. |
Features | ||
Easy setting and operation with a numeric keypad and LCD display Built-in calendar and clock for printing date and time at any time Sends re-zero and weighing data request commands to the balance/scaleClear and visible dot matrix printing, which also enables long-term preservation of the printed recordsCompact and lightweight for portability and installation anywhereInterval printing mode for printing weighing data at set intervalsChart printing mode for printing time-series variations of weighing dataDump printing mode to receive and print GLP/GMP/GCP/ISO compliant output from the balance/scalePerforms and prints the results of statistical calculation including standard deviationPrints an ID number set for the printer at any timeDust-free paper (AX-PP173-S) available for use in clean roomsTwo types of RS-232C cables (D-Sub 25P and D-Sub 9P) provided as standard to connect to balances/scales with different interfaces*Comes with an AC adapter as standardReceives a print, paper feed, print statistical calculation results, print total, re-zero, or weighing data request command from the optional foot switch (AX-SW128) |
Features | ||
Data transmission to any application such as Excel, Word, and NotepadNo driver software requiredInternal clock to transfer the date and time at the same timePocket size of 55 103 16.5 mmIP65 (with the casing cover)No battery required | ||
Category | Product | Operation | RS-232C |
Balance | AD-4212A/B | OK | 25 pins |
AD-4212C | A gender changer is required. | 9 pins | |
EK-i | OK | 9 pins | |
EK-H | OK | 25 pins | |
FX-i | OK | 9 pins | |
GH | OK | 9 pins | |
GP | OK | 25 pins | |
GR | OK | 25 pins | |
GX/GF | OK | 25 pins | |
GX-K/GF-K | OK | 25 pins | |
HR-i | OK | 9 pins | |
HR | OK | 25 pins | |
Moisture Analyzer | MS/MX/MF/ML | OK | 25 pins |
Viscometer | SV | OK | 25 pins |
Counting Scale | HC-i | OK | DIN |
FC-i/FC-Si | OK | 9 pins | |
Platform Scale | FS-i | A gender changer is required. | Dedicated cable |
FG-M/L | Only when used with AC adapter | DIN | |
HV-G/HW-G | For the VFD type (KGV) only | DIN | |
SC/SE | A gender changer is required. | Dedicated cable | |
SW | A gender changer is required. | Dedicated cable | |
Weighing Indicator | AD-4402 | OK | 25 pins |
AD-4405 | OK | 9 pins | |
AD-4406 | OK | 9 pins |
Features |
Eliminates spacing/cabling problems and risk of contamination in places such as fume hoods, safety enclosures and glove boxesPrevents substances from adhering to printer paper by isolating the balance from the printer |
Specifications | ||||||||||||||
|
Features | ||
Connects to A&Ds balances and scales using either RS-232C or current loopIncludes an AC adapter and a communication cable that matches your instrumentRecognizes the balance/scale baud setting automaticallyLarge and bright VFD display |
Weighing instrument | Using RS-232C | Using current loop | ||
Option required | Communication cable | Option required | Communication cable | |
AD-4212A/B | None | D-SUB25 cable | Not applicable | |
EK-H, EK-HR | OP-03H | D-SUB25 cable | OP-05H | DIN cable |
EK-i, EW-i | None | D-SUB9 cable | Not applicable | |
ET-W, ET-WR | OP-03W | D-SUB25 cable | OP-05W | DIN cable |
FC-i | None | D-SUB9 cable | Not applicable | |
FG | OP-03 | DIN cable | OP-05 | DIN cable |
FG-M/L | OP-23 | DIN cable | Not applicable | |
FS | OP-03 | DIN cable | Not applicable | |
FX-i, FX-CT, FX-GD,FXi-WP, FZ-i | None | D-SUB9 cable | Not applicable | |
GH, HR-300i/202i | None | D-SUB9 cable | Not applicable | |
GR | None | D-SUB25 cable | Not applicable | |
GX, GX-R, GF,GX-K, GX-KR, GF-K, GP, GP-R | None | D-SUB25 cable | OP-04orOP-06 | DIN cable |
HC-i | OP-03 | DIN cable | Not applicable | |
HR-200/120/60 | OP-03 | D-SUB25 cable | OP-03 or OP-05 | DIN cable |
HV-G/HW-G | None | DIN cable | Not applicable |
Features | ||
Displays weighing dataRemotely controls a weighing instrument with key operations (no access to the internal settings)Outputs weighing data to another external device such as a PC or printer via the RS-232C connectionOptional BCD, comparator, and analog outputs availableCan be panel-mounted |
Weighing instrument | AD-8922 Key | |||||
ON:OFF | CAL | SAMPLE | MODE | RE-ZERO | ||
AD-4212C | Turns the weighing instrument display on or off. *1 |
Calibrates using the external mass. |
Switches the minimum display. *2 |
Outputs the received data to an external device. *3 |
Switches the response characteristic. |
Sets the display to zero. |
GX, GX-K, GP, GH, ET-W, FZ-i |
Calibrates using the internal mass. |
Switches the unit displayed. *4 |
||||
GR | ||||||
GF, GF-K, EK-H, AD-4212A/B, HR, HR-i, FX-i |
- | |||||
EK-i,EW-i | - | - | - | |||
EK-G, EW-G, FC-i,FC-Si, FG, FG-L,FG-M, FP, FS, FS-KL,HV-G, HV-WP, HW-G,HW-WP |
- | - | - | - | - |
Features |
The holders can be placed on a balance and used to secure tilted container for measurementAlso the holders can be turned over and used to secure a long test tube as well |
Features |
Useful when it is difficult or undesirable to press a key directly on the balance/scale. For example, Both of your hands are full.The balance/scale is used in a glove box.You don't want to tilt or cause any tremor to a highly-sensitive balance, such as the BM-20/22 microbalance. |
Microbalances are especially susceptible to minute vibrations, which often cannot be sensed by humans. Such vibrations can be caused by strong winds swaying the building, outside traffic, nearby machines in operation, opening/closing of doors, people passing by, and even very distant earthquakes.
Features |
Isolates a precision analytical balance from vibrations that are imperceptible by humans but seriously affect the stability of weighingFits nicely inside the separately-sold, AD-1672 tabletop breeze break for micro analytical balances |
Features |
Date and time printing function (built-in calendar/clock)Cumulative memory function (Memory stored even if the power supply is switched off.)Internal battery provides calendar/clock and cumulative memory function back-up for approx. 10 years.Cumulative/statistical calculation functions by code/ input channelPrint modes* : Random, Dump, Interval, and BatchPrint format modification function using the operation keys (in the random print mode)Connectable to external displays (up to 3 devices) with a current loop output (channel 1 only)Up to 4 data output devices including indicators (AD-8118C-02 required) can be connected to a single AD-8118C printer.Receives input signal via a current loop (maximum length of approx. 100m) or RS-232C (maximum length of approx. 15m) |
Contents of the introduction |
Charging Time: Approximately 15 hoursBattery type: Nickel-Metal-Hydride (Ni-MH)Function: Charging with timer function for automatic stoppageOutput Cable Length: Approximately 1 meter |
Features |
Possible to manage weighing data using a networkPossible to control the weighing instrument from the connected computerComes with the WinCT-Plus software, by which the user can collect data from and send commands to multipleweighing instrumentsComes with a connection cable* * Please specify the connection cable type or the weighing instrument to be connected when ordering (see the requiredaccessories table below). If not specified, a D-Sub 25-pin to D-Sub 9-pin cable (AX-KO1710-200) will be provided. |
Weighing instrument | Interface option for the instrument | Communication cable (2 m) |
GX, GF, GX-K, GF-K, GP, FP AD-4212A, AD-4212B, GR, HR |
None (D-sub 25-pin, standard accessory) | AX-KO1710-200 |
EK-i, EW-i, FC-i, FC-Si, HR-i | None (D-sub 9-pin, standard accessory) | AX-KO2466-200 |
EK-G, EK-H, ET-W, EW-G | OP-03 (D-sub 25-pin) | AX-KO1710-200 |
HV-G, HV-WP, HW-G, HW-WP, HW-G | None (Din 7-pin, standard accessory) | AX-KO1786-200 |
FG, HC-i | OP-03 (Din 7-pin) | AX-KO1786-200 |
FS, FS-KL | OP-03 (Din 8-pin) | AX-KO1786-200 |
FG-L, FG-M | OP-23 (Din 8-pin) | AX-KO1786-200 |
AD-4322A | OP-04 (D-sub 25-pin) | AX-KO1710-200 |
AD-4405 | None (D-sub 9-pin) | AX-KO2466-200 |
AD-4410 | None (D-sub 9-pin, standard accessory) | AX-KO2466-200 |
Please use the Ethernet interface option GH-08 for the GH Series, FXi-08 for the FZ-i / FX-i, FZ-iWP / FX-iWP, and FZ-CT / FX-CT Series, and AD-4212A-08 for the AD-4212A / AD-4212B Series. |
DisplayTouch panel system STN 5.7 inch color liquidcrystal Waterproof (IP-65) | |
CPU boardCPU SH4, OS RT-OS, SD RAM 64MB, Memory 64MB | |
Standard interfaceLAN (Ethernet) (10Base-T), RS-232C/422/485, USB, RUN output | |
Individual I/O board installation (up to 4 slots)Load cell input, Analog I/O, Pulse input, Digital I/O, Relay output, Etc. | |
PowerAC85V-250V 50/60Hz approx. 30VA | |
Unit(WxHxD) 192x144x191mm |
Features |
High cost-effectivenessBig LCD 25mm in heightMulti power supplyAlkaline C type battery:battery life 180 hours (LC 350ohms x 1)battery life 70 hours (LC 350ohms x 4)Optional AC adapterF1, F2 selectable function keysLoad cell 350 ohms x 4Optional stand availableUniversal Flexi ComsUFC allows you to customize the protocol of the printing format as well as outputting the data with RS-232CMulti interval2 weighing ranges selectableAccumulation FunctionAccumulative data is stored into memory automatically or manuallyComparator Function Upper/Lower, HiHi/Hi/OK/Lo/Lolo & comparisonComparator output to optional relaysSimple batch weighingAutomatic batching and customer programming capabilityBuzzer functionCode memory function |
AD1683 static eliminator, which incorporates a high-voltage
power source, is a DC power-operated small-size device which can
eliminate static electricity from charged objects without the need of an
external high-voltage power source.
Since this static eliminator is compact and lightweight with no fan
(no breeze is produced)
and requires no high-voltage wiring, it is very easy to handle.
Being of a DC type, it has a remarkable ability for generating ions.
Features |
Can be easily and safely installed because they require no high-voltage wiring.Being of a DC type, this static eliminator has a remarkable ability for generating ions and can be used forelimination of static charges from quickly running or highly electrified workpieces.Little or no reverse charge is induced by irradiated ions because of its excellent ion polarity balance.Achieves static elimination with a high degree of efficiency regardless of the polarity or the potential of the charged object.Suited for static elimination in narrow and remote places because of its lengthy ion irradiation distance.Produces only a little amount of ozone thanks to its high ion generation efficiency.A current limiting circuit is incorporated in the ion generating electrode to reduce the possibility of electric shockBeing of a DC type, this static eliminator, unlike PULSE-DC, involves no swing in surface potential of the charged object. |
Stainless steel summing Box
Accepts cable from up to four load
cells, adjusts the gain for each load
cell and sends the signal to a
weighing indicator.
Features | |
A&D's world-class Class 0.5 testing machineLoad frame stiffness has been greatly improved by 30%Rated output accuracy of up to 1/500 is guaranteedHigh-speed sampling:1 msecA maximum of 13 input signal channelsColor touch panel (optional)Various operational environments |