Our Products
Gates
2 Products availableWire Mesh, Wire Screens & Gratings
2 Products availableGates, Fences And Fencing Materials
2 Products availableStorage Drums, Tanks & Containers
2 Products availableWelding Machinery
1 Products availableMosquito, Insect & Bugs Netting
1 Products availablePVC, PP & Plastic Products
1 Products availableWindow Grills
1 Products availableOur product range contains a wide range of beach gabions and weldmesh panels
A-1 Fence is in a position to offer wide variety ofsecurity gatesto suit requirements of a project. It could be a one off gate or, agateto be integrated with the perimeter fence, where the gate construction is done such that fence and gate blend into each other, which adds immensely to the aesthetic appeal of the whole construction.
There are several design considerations before deciding upon thesecurity gate designwhich fulfills the project requirements whether it should be a sliding gate, or single swing gate, or double swing gate, telescopic gate, or should there be a small pedestrian gate built inside a large industrial gate, what are the security requirements, should there be an access control, should the gate be motorized or manual, and more such considerations. A-1 Fence is also manufacturer ofcantilever gatesfor sites which might be too dusty and where there are unleveled ground conditions.
A-1 Unicois an innovative welded mesh fencing system, which requires NO NUTS, BOLTS or CLAMPS for installation. It merely comprises of three components welded mesh panel, profiled post and post cap. Its aesthetic appeal makes it the best fencing solution for residential fencing, school perimeter fencing, commercial complex fencing, parks and garden fencing, walking pavement fencing etc.
Today, A-1 UnicoFence has been successfully installed at many gardens, schools, walking pavements, residential buildings/apartments & commercial premises.
Keeping up with its commitment to innovate and finding better perimeter fencing solutions, A-1 Fence introduced a woven wire mesh fabric which is, at the same time, more cost efficient and stronger than conventional chain link fence. Owing to the neat honeycomb structure this mesh makes, it calledHoneycomb Fence.
The advantages this fence scores over a convention chain link is because of the number of time two adjoining wires are twisted with each other.Chain link fenceis formed by two adjacent wires being linked together (by weaving), which results in formation of a rhombus (or diamond as it is more commonly known), each end of an individual diamond has the adjoining wire crossing each otheronce. Thus, if the chain link is cut or breaks at any one point, the fence completely breaks down as the links release themselves of each other because of the weak weaving structure.
To counter this disadvantage, A-1 Fence made a small change, and made the two adjoining wires twist with each other five times, and this results in a structure close to hexagon than a rhombus. These 5-twists result is strong woven structure, and even a few cuts to the fence fabric do not allow complete disintegration. The same property also lends more strength to the fence fabric even in a smaller wire diameter, thus, with less steel one gets a stronger structure.
Anti-climb weld mesh system (also known asPrison Mesh fencing or 358 mesh fencing) is dominantly used in fencing systems designed to bring maximum perimeter protection to a site without impeding visibility (which is important for human patrolling or video surveillance).Anti-climb fencehas been universally accepted as the most secure form of welded mesh panel, commercially available with significant inherent advantages over products such as chain link fencing or other forms of welded mesh fencing, owing to its unique configuration.
Anti-climb meshpanel is made of galvanized steel wire (and can then be optionally polyester powder and/or Epoxy coated) in an aperture configuration of 76.2 mm x 12.7 mm. This means a clear opening between horizontal wires of less than 9 mm inadequate to insert hand tools for cutting the mesh. The vertical wires of the mesh further restrict the opening available, forming small rectangles throughout the panel.Anti-climb fenceis therefore extremely difficult to penetrate using conventional hand tools and thus gives a delay time under attack several times greater than traditional fencing products such as chain link fence.
The closeness of the horizontal wires in this Anti-climb fence also makes for a mesh panel almost impossible to grip (as shown in the below figure), thus climb, when used as part of a fencing system, and thus the name Anti-climb.
The mesh apertures are finger/toe proof and are designed such as to give excellent visibility through the mesh, both from perpendicular and angled directions. The welded mesh panels have a non-aggressive appearance with pleasant aesthetics, further adding to their pre-eminence over other wire fencing panels. Finally, unlike chain link fencing the welded mesh will not unravel or lose stability if cut every intersection of every wire is individually welded throughout the mesh panel. Its unique configuration makes it ideal for applications such as military, energy, airport, schools and other sensitive sitesperimeter fencing. To know more about rates/costing of Anti climb fence (Prison Mesh or 358 mesh), you can send us your specifications.
Anti-climb weld mesh system is highly recommended forA1 Fence Products is a leading manufacturer and supplier of Anti-Climb fencing, Prison Mesh fencing, 358 Mesh fencing required for wide range of applications.
Gabions are rectangular wire mesh baskets filled with rock at the project site to form flexible, permeable, monolithic structures such as retaining walls for commercial, industrial and road projects. Gabion and Gabion mattresses are trusted, well proven and technically sound solutions to retain earth and reduce erosion. This technique is extensively used around the world. They are also used for bank stabilization, channel linings and weirs.
(Note: Retaining walls are permanent structures typically constructed at a toe of slope or to retain backfill.)
The key to longevity of these gabion structures is based on the quality of the wire used for manufacturing gabion boxes and the correct design aspects. A-1 Fence is committed to fulfill both these parameters and provide our customers with finest quality product with technical support as and when required.
The assembly and installation of gabion is enormously simple and can be carried out in any environment without the assistance of specialized tools and workforce. Our products are supported by design assistance from qualified Geotechnical engineers who can provide timely technical support.
A-1 Fence, in association with Heras International offers to the Indian market, some of the finest gates perfected by Dutch engineering
Delta GatesStandard Configuration:
Strong Qalities:
A-1 has a sophisticated state-of-the-art powder coating line (read more about A-1 Fences powder coating line). Our powder coating facility is customized for large tubes and pipes, which find application in oil and gas industry or in applications where corrosion is a problem.
A-1 Fence has introduced a newwindow grillingsolution tailored for Indian construction industry.
One of the challenges all developers today face in India in regards towindow grillsis absence of a factory finished product which can give them adequate strength, longevity, pleasant aesthetics and most importantly tailored to the required sizes. In such a scenario, window grills have to be made of un-galvanized mild steel by welding on the site, on which cheap coating material is applied. This process is unable to prevent rusting which weakens the window grills in a few months, apart from resulting in very poor aesthetics. Also the product becomes labour intensive.
To provide a solution, A-1 Fence has tailored its welded mesh product, which is made of galvanized wire and subsequently polyester powder coated, to make this application possible. The welded mesh panels can be made in different wire diameters and mesh sizes to suit the security and strength requirements in different conditions. These panels are made to accurate size by automatic welding machines.
Aesthetically pleasing tree guards can be made using weld mesh panels and springs. Springs apart from allowing for box structure doubles up as posts to fix the tree guards to earth. Weld mesh panels for tree guards are made out of 4.5mm galvanized wire in the pitch size of 75mm x 75mm, and are polyester powder coated, enhancing the appearance and longevity of the product.
Weld mesh is the term given to the kind of barrier fencing that is manufactured in square or rectangular mesh from steel wire, welded at each intersection. It is usually affixed to steel uprights. Weld mesh fence has an advantage overchain link fencingwire of not bending so easily and not being so easily cut.Anti Climb mesh(a version of weldmesh, also shown in the image above) is a high security weldmesh, with mesh aperture being smaller (typically: 75mm x 12.5mm). This mesh is ideal for high security sites, schools and industrial parks.
At A-1 Fence, we have developed a complete in house ability to supply & manufacture a complete weld mesh fencing system which would include supply of weld mesh fence panels, fabrication of posts, cover plates, cross bracings and horizontal supports, along with crank fabrication.
Weld mesh panelsare often crimped to add more lateral strength to the panels, and it also adds to the aesthetic appeal of the fence