Samik India

Hedua, Kolkata, West Bengal

Samik offers pp bag filter assembly.

Features and Benefits

• Dynamic Large O-Ring Seal
• Compression Bag Sealing Surfac
• Knife Edge Sealing
• Micron Rating 1 To 200
• All Polypropylene Construction
• Positive Sealing of Different Bag Thickness

Technical Specifications

• Sump  - Polypropylene
• O-ring  - Buna-N / EPDM / Silicon
• Vent Plug  - Polypropylene
• Gauge  - Brass
• Sizes (Bag Filter System Suitable for) - Ø 4” x 10” Long Filter Bag, Ø 4” x 17” Long Filter Bag.

RO Controller is an easy to use, programmable controlling & protection device for reverse osmosiswater purification unit with direct start, three phase or single phase with different output power.

ApplicationsRO Controller is specially designed for reverse osmosis water purification unit by Contacting dosing pump, solenoid valve, electrical meter, pressure switch etc.

Technical parameter & features

• Double pumps control
• Specially designed for reverse osmosis water purification unit
• Auto / Manual switch  
• Protect the pump against many faults
• Dynamic LCD displaying RO unit running information
• Pump accumulative running time displaying
• Pump last five fault record displaying

Models

• RO 2-2 Single +Single, 2.2 kw – 2.2 kw  AC 220V/50Hz, Single Phase
• RO 2-3 Single +Three,   2.2 kw + 4 kw AC 380 V / 50 Hz, 3 Phase
• RO 3-3 Three + Three,   4 kw + 7.5 kw AC 380V / 50 Hz, 3 Phase
• RO 3-3 Three +Three,   4 kw +15 kw AC 380V/ 50 Hz 3 Phase

Samik offers PP Wound Filter Cartridge of good quality at reasonable price to our clients.

Features and Benefit

• Standard and customizes sizes fit most housings
• Filtration rating from 1 to 100 Micron
• High Strength & pressure resistance
• Manufactured in continuous length
• Full range of sizes from 10” to 60” length
• Excellent flow with low pressure drop
• High dirt holding capacity
• Compatible with a wide range of fluids
• NSF & FDA approved

Technical Specifications

• Configuration - Double Open Type (DOE Type), Code 7 (226 O Ring Design)
• Construction - Polypropylene With Polypropylene Core, Cotton with Stainless steel core, Glass fibre with stainless steel core.

Applications

• Vegetable Oils
• Dilute Acids
• Alkalis
• Organic solvents
• Portable liquids
• Glass Fiber Filter Wound
• High Temperature filtration of
• Mineral Acids
• Organic solvents
• Oils
• Polypropylene Wound Filter Cartridge
• Organic Acids
• Oils
• Concentrated Alkalis
• Water
• Organic solvents
• Electroplating solution
• Photographical process fluid

Unique Transfer Pump With Brass Impeller.

These Are Available In Two Models :

• IDB35 220v/ 0.37 Kw. Max Flow - 36 Lpm, Max Head - 35 M, 1" Bsp Connection.
• IDB65 220v/ 0.75 Kw.  Max Flow - 50 Lpm,   Max Head - 50 M, 1" Bsp Connection.

304 Horizontal Centrifugal Multistage Pump.

• With SS Impeller CMF range
• All the pumps are warranted for one year against any manufacturing defect. Spares are readily available. We are selling these pumps for more than eight years now with full satisfaction of our customers.

Applications :

• Water treatment
• Industrial cleaner and dish washer
• Pressure boosting for the water on processing line

RO Membranes CPA2 – 40*40  & 80*40
Reverse Osmosis Membranes (4” & 8” Membranes)
“The Workhorse” Most widely used with consistent performance Hydranautics is one of the global leaders and a trusted brand in the field of membrane technology. These membrane elements set a new standard for high performance with high rejection and lower fouling, used extensively in municipal and industrial water and wastewater treatment.

We offer a wide array of FRP membrane housing.

Codeline : Pentair, Fibermite Pressure tubes are available from 1 - 6 elements. Side ports are also available.

Samik India presents a wide range of Filter Housings which are of very good quality and finish. The rugged construction of these housings ensures very good performance or a long time.

Details

• Excellent Chemical Resistance
• Suitable for Series Mounting
• Excellent Quality
• Great Finish and Looks
• Attractive Price

Used in

• Low Flow Original Equipment
• Food Service Equipment
• Kidney Dialysis Equipment
• Other Low Flow applications where

Our company stocks the product in mass. Thus, we can cater to bulk/retail requirements with easy and ensure fast delivery of product. Our organization is highly concerned towards providing excellent quality products to the customers and thus check them at all stages.

Detail : Available in both 2.5” X 4” dials and back and bottom connections.

Polypropylene Pleated Filter Cartridges have been designed as an effective membrane pre-filter and as final polishing filter for many liquid processing applications. The cartridges are double layered filters. The graded porosity design removes particles in sequence such as larger particles by the more open outer layers and the smaller particles by the tighter inner layers. The outer layer acts as the pre-filter while the inner layers provide the rating at the specified pore size. This efficiently spreads the contaminants throughout the media matrix resulting in superior contaminant holding capacity, lifetime & pressure drop as compared to other media cartridges.

Features & Benefits

• Very good for pre filtration & Clarification of fluids  
• Graded porosity polypropylene Media 100% PP construction  
• Wide chemical compatibility
• Consistent & good flow rates  
• Biologically safe  
• No fibre migration  
• FDA approve  
• Thermally welded construction  
• End connections to fit all standard housings
• Construction -  Filter media - 100% Polypropylene fibre  
• ‘O’ Ring/ Gaskets - Silicone/ EPDM/ Viton
• Configuration -  Double open end type (DOE Type)
• Code 7 (226 ‘O’ Ring design/ Bayonet or fin)
• Code 3S (222 ‘O’ Ring design/ Bayonet or fin)
• Sizes - 5”, 10”, 20”, 30”, 40”

Applications

Food & beverage - Bottled water, Beer, Wine, Flavours, Polishing lines, clarification Pharmaceutical, Membrane pre-filtration, Ophthalmic, Oral medications, Serum, Fine chemicals - Polymers, photo resists, Acids bases, Solvents, Electronics - High purity water, photo resists, acids, etch solutions Cosmetics - Alcohol, creams, lotions, essential oils, mouthwashes Metal finishing - Plating solutions, wash solutions, paints, resins, varnishes Water treatment - Potable water, resin trap, pre/ post UV, membrane protection

Activated carbon block type cartridge is made from coconut-shell. Activated carbon is moulded together with synthetic fibre binder via a wet production method. Activated Carbon block cartridge is well suited for removal of organic tastes, odours, chlorine & sediments. They are ideal for filtration of potable water. Cartridges are made from FDA approved materials.
Generally speaking this type of cartridge is useful to remove odours and chlorine in up to 50, 000 litre of water. Adsorption capacity is therefore unaffected by its moulding system because the surface of activated carbon can maintain high level of chlorine reduction and high level of chemical adsorption capacity.

Product Specifications

• Micron Rating 5, 10µ
• MOC Activated Carbon
• Length 10", 20", 30"
• Inner Dia 28mm,
• Outer Dia 63mm, 110m (Jumbo)
• O-ring material EPDM, Silicone, Viton

Max Operating Temperature 

• Sterilization - 60^oC
• Autoclave - 121^oC, 30 min, 10 times
• Hot water - 80^oC, 30 min, 30 times
• Configuration - Double Open End (DOE)

Features & Benefits

• Reduces taste & odour
• Organic impurity removal  
• Jumbo size also available in 10” & 20”

Applications

• Residential
• Food Service
• Water Purification
• Beverages
• Oil removal
• Clarity improvement etc

Samik offers PP Spun Filter Cartridge of good quality at reasonable price to our clients.

Features and Benefit

• Thermally bonded polypropylene micro fiber construction for higher filtration efficiency
• Wide chemical compatibility, using 100% pure polypropylene
• Materials meet FDA requirements throughout
• Graded density structure for maximum dirt holding capacity
• High void volume, resulting in low
• Differential pressure and excellent dirt
• Holding capacity
• Supported core for overall strength
• Consistent flow rate and superior
• Filtration performance
• Ideal for a wide variety of industrial
• Differential pressure and excellent dirt
• Free of surfactants, binders and adhesives
• Excellent flow with low pressure drop
• High dirt holding capacity
• High strength & pressure resistance
• 100 % polypropylene for wide chemical compatibility
• One piece construction up to 1016 mm
• Nominal & absolute filtration rating.

Technical Specifications

• Operating Conditions - Maximum temperature - 70^oC, Maximum differential pressure - 2.4kg/cm²
• End Cap Configuration - DOE (Double open end) and Code 7 Style ( 226 o Ring).

Applications

• Food and beverage
• Process water
• Pharmaceuticals
• Pre filtration
• Fine chemicals
• Process streams
• Water purification
• High purity water
• Petrochemicals
• Photographic
• Chemicals
• Emulsions
• Metal finishing
• Electroplating
• Resin traps
• Potable water

The most popular and reliable dosing pum in the water treatment industry for years.

Detail : Available in standard and neo models.

Made of ABS material, available in 40, 25 and 20nb sizes. Valves are available in top mount and side mounts models for up flow or down flow Filters / Softeners. Top mount valves are supplied with top and bottom strainers and adaptors to suit 2 1/2” and 4” opening vessel. Samik offers initiative Engineering make valves which are well known for its quality.

CV range 304 SS High Pressure Pump for Water treatment Plant.

• CV is a vertical non-self priming multistage centrifugal Pump for multifunctional product to be used to convey water at different temperature and with different flow and pressure, mainly to boost the main pipeline. It is most suitable for RO plants All the pumps are warranted for one year against any manufacturing defect. Spares are readily available. We are selling these pumps for more than eight years now with full satisfaction of our customers.

SAMIK INDIA offers quality Filter Bags for liquid filtration in wide range as required but the customers.

Features

• High performance
• Excellent for viscous fluid filtration
• High flow rate & Low pressure drop
• Strong and secure seam
• Wide chemical compatibility
• Positive sealing arrangement with choice of materials
• High dirt holding capacity
• Easy maintenance
• Construction of Liquid Filter Bag
• Stock media is fabricated into the filter bag with double over stitching and or ultrasonic fusing. Materials for the seal/neck ring can be either polypropylene, galvanized or stainless steel.

Technical Specifications

• Standard Sizes
  • 4" x 10" Long
  • 4" x 17" Long
  • 4” x 20” Long
  • 7" x 17" Long
  • 7" x 32" Long

• All type of customized sizes are also available
• 1, 5, 10, 20, 50, 100 & 200 Micron ratings.

MOC

• Polypropylene
• Nylon
• HDPE
• Polyester
• Nomex
• Ryton
• Inner construction
• Stitched Types, Fused
• Single layered , Multi Layered
• Fitment of collar bag
• PP Collar Bag
• Snap Bond Fit Collar Bag
• Steel Ring Collar Bag
• Rubber collar Bag

Applications

• Paints
• Ink
• Lacquers
• Resins
• Adhesives
• Bitumen
• Oils

Aquavas Pressure Vessel SAMIIK offers AQUAVAS premium quality Composite Pressure Vessels, applicable for practically any water or water treatment application. The high performance vessel material with FRP reinforced outer shell provides strength to withstand pressures as high as 10 kg/cm² without any structural damage. The vessels are immune to most chemicals.

• High performance composite material – with FRP filament
• Continuous seamless inner liner shell with
• 100% corrosion resistance
• Easy Installation and low maintenance
• 5 year warranty
• Flange adaptors and reducers are available
• Opaque liner for out-door applications available.

Applications

• Residential water filtration
• Commercial water filtration
• Industrial water filtration
• Softening applications

Operating Conditions

• Operating Temperature - 49^oC for threaded vessels and 65°C for flanged vessels
• Max Operating Pressure - 150psi (10.5 bar).

Our procedures of payment are lawful, simple, and secure. We do not levy concealed charges while presenting the invoice and make sure payment is carried out securely from you to us. Positioned amid the topmost providers, we are offering excellence in the form of products from Kolkata(India).

We have SS Membrane Housing with ABS End Cap in 40*40 & 40*80 sizes. Attractive price.

These housings available in 304 SS up to 30” length in single element and also in multi-elements of 3, 5 and 7 elements.

Driven by the passion to provide nothing but the best, we have risen as trusted suppliers of Unidose Dosing Pump in the market. Our team members help us completely to deliver exceptional range of products that is in conformance with the standards.

Details

• SAMIK INDIA offers JM Series Mechanical Type Metering Pump
• Brand - UNIDOSE Main Features
• Easy installation & simple operation
• Accurate measurement & adjustable flow at will
• Strong anti-corrosiveness
• Economical & practical, long- life
• Purification of water & sewage treatment.

Our organization is positioned at Kolkata(India) and has gained immense acknowledgement and a respected place in the market. Our organization has observed impressive rise as Plastic Tube Rotameter supplier, courtesy our ability to fulfill to wholesale demands without hassle.

Details :  LZS Series Plastic Tube Rotameter.

Customers should stay rest assured with us for the payment procedures. They can pay us conveniently through wide-ranging payment mediums. Our products are value for money, as they are subjected to stringent quality control policies and are trusted by many.

Details

• LZM – J SERIES Acrylic Rotameter
• Performance Ultra-stable
• Advance Functions
• Convenient Operation
• Available in Panel type / Online type

Over the years, our company has a cemented its position in Kolkata(India) and is determined to become a trusted provider in other markets as well. We have strong tie-ups with the leading e-commerce merchants who provide us a secure payment gateway that helps us in avoiding physical movement of money.

Details

• MOC : Stainless SteelUSS brand Liquid Pressure Gauge of high quality
• Available in 2.5” dial with 1/4" connection & 4” dial with 1/2" connection Both in panel type and online type.

Samik offers PP Transparent Moulded Filter Housing of high quality and these are useful for various applications. We are located at Kolkata.

Features and Advantages

• Polypropylene End Caps
• SAN / Polycarbonate Sump
• Optional Pressure relief button
• Mounting Bracket cap with four screw bosses for rigid mounting installationsOptional Viton & Silicone O rings for Chemical Compatibility.

Technical SpecificationsSizes Suitable for 2.5” Diameter Filter Cartridge: 5” and 10” Long Transparent Housing with brass  3/4” , 1” connections.

Applications

• Cutting Oils
• Varnishes
• Lacquers
• Paints
• etroleum Derivatives
• Processing Chemicals
• Inks
• Resins
• Coolants